I am trying to move Azure resources to a different subscription/resource group within my account. Was able to move most resources but some gave error:
VALIDATION ERROR / ERROR TYPE Resource move validation failed. Please
see details. Diagnostic information: timestamp '20161130T144724Z',
subscription id '290b5843-765a-4b08-98a6-xxxxxxxxxx', tracking id
'd8616912-dfda-4bd0-853e-88e438a37ca5', request correlation id
'65f88afd-5e9f-47ba-ab17-a96b548d7e4b'. (Code:
ResourceMoveProviderValidationFailed)
The move resources request does not contain all the dependent resources. Please check error details for missing resource ids.
(Code: MissingMoveDependentResources)
I have tried looking through diagnostic logs and used Get-AzureRMLog command but have not been able to get information on the validation error or the dependent resource. Can someone tell me which resources are missing or how to get log details.
Checklist before moving resources
There are some important steps to perform before moving a resource. By verifying these conditions, you can avoid errors.
https://learn.microsoft.com/en-us/azure/azure-resource-manager/resource-group-move-resources
Related
Is there a tool that I can use to validate my web.config? The reason I ask is that the file appears to be valid XML and IIS is complaining that file is invalid. No explanation or indication as to why.
Thanks in advance.
Edit:
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module IIS Web Core
Notification Unknown
Handler Not yet determined
Error Code 0x8007000d
Config Error
Config File \?\C:\DignityFiles\Source\simplicity\Simplicity\web.config
Requested URL http://simplicity-local.dignitytest.co.uk:80/
Physical Path
Logon Method Not yet determined
Logon User Not yet determined
Config Source:
-1:
0:
More Information:
This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information ยป [This takes you to "https://support.microsoft.com/en-gb/help/942055/-http-error-500-19-error-when-you-open-an-iis-7-0-webpage"]
Link to the web.config (Note: sensitive information has been redacted)
I have (eventually) found the answer: https://stackoverflow.com/a/41267673
Installing the URL rewrite module fixed my issue.
This answer addressses the immediate concern, but if you are looking for a general solution in powershell I have created a function that addresses this.
The full answer is here: how do i validate an IIS web.config in powershell
But the gist of it is you have to find all the "filters" and test each of them individually via Get-WebConfiguration
In my odoo 10 after several month I am encountering the problem of Access Right for my users. When they want to group the tasks based on project, etc they face the following message:
Odoo Warning - Access Error
The requested operation cannot be completed due to security restrictions. Please contact your system administrator.
(Document type: project.project, Operation: read)
Any Idea?
Seeing your error its seems you have to give access rights for project.project model for read. If its given then might be there some record rule for project.project model in your database you have to check it.
I am getting an error when attempting to create a new project for Google API at https://code.google.com/apis/console
I was hoping the error was temporary, but I have been unable to create a new project for a couple weeks now.
The error seems to have changed, as it used to include server ip information and a lot of other data. An example with some potentially private information removed:
APPLICATION_ERROR;google.cloudresourcemanager.projects.v1beta1/DeveloperProjects.CreateProject;com.google.apps.framework.request.StatusException:
generic::FAILED_PRECONDITION:
;AppErrorCode=9;StartTimeMs=1489595147198;tcp;Deadline(sec)=50.0;ResFormat=UNCOMPRESSED;ServerTimeSec=0.027545452117919922;LogBytes=256;FailFast;EffSecLevel=none;ReqFormat=UNCOMPRESSED;ReqID=removed;GlobalID=removed;Server=ip:port
Now the error is a lot shorter, although still seems to be related to the same cause:
com.google.apps.framework.request.StatusException: generic::FAILED_PRECONDITION:
The spinner in the dashboard appears to spin forever, while the error appears underneath alerts after a few seconds. I have tried numerous project names and all fail with the same error.
Is there some type of quota I am missing that is preventing this? The quota menu item requires me to select a project, which I don't have any.
Clicking on the error brings me to a page with the following message:
You don't have permissions to perform the action on the selected resource.
Make sure that the Google Developers Console is on for the user that is trying to create the project.
Admin.google.com > Apps > Additional Google services > Google Developers Console and turn on for any org or user that needs it.
Looks like there's another possible cause, in addition to the one that #AndrewL provided in his solution.
Short answer:
I ran into the same error when I attempted to associate a new GCP project with our billing account via Terraform. Our billing account has a default limit of 5 projects (which we had already met), and this blocked the association of new accounts and generated the Error 400: Precondition check failed., failedPreconditionerror message. To fix, I had to remove/delete one of the already associated projects before I could add a new one.
Long answser:
Here is the error message I encountered in Terraform (sensitive data and IDs redacted):
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
~ update in-place
Terraform will perform the following actions:
~ module.<MY MODULE PATH>.project
billing_account: "" => "<MY BILLING ACCOUNT ID>"
Plan: 0 to add, 1 to change, 0 to destroy.
Do you want to perform these actions?
Terraform will perform the actions described above.
Only 'yes' will be accepted to approve.
Enter a value: yes
module.<MY MODULE PATH>.project: Modifying... (ID: <MY PROJECT ID>)
billing_account: "" => "<MY BILLING ACCOUNT ID>"
Error: Error applying plan:
1 error(s) occurred:
* module.<MY MODULE PATH>.project: 1 error(s) occurred:
* google_project.project: Error setting billing account "<MY BILLING ACCOUNT ID>" for project "projects/<MY PROJECT ID>": googleapi: Error 400: Precondition check failed., failedPrecondition
Terraform does not automatically rollback in the face of errors.
Instead, your Terraform state file has been partially updated with
any resources that successfully completed. Please address the error
above and apply again to incrementally change your infrastructure.
My billing account was at its maximum of 5 projects. As a test, I removed one of the projects and then ran Terraform again. It then successfully added the new project to the billing account. To double check, I attempted to add yet another new project to the billing account (to push the amount to 6) and then received the same error message again.
Straight up deleting one of the associated projects also works.
It stands to reason that requesting a limit increase for your billing account's associated projects will also fix this issue.
Another possible reason for this error can be accessing the .xlsx file. If you are accessing this file using Google spreadsheet then you need to save the .xlsx file in to save as google sheets by choosing the option available in the File menu at the top.
Thanks
Another possible reason for this is Organization policy, denying the particular API on ORG/Folder/project level.
For me the error was working because I was trying to read the file from a shared google folder. Check if the drive where the file lives is your drive and not a shared one.
Hello I am Developing a ASP.NET MVC3 application and MYSQL Database accessed by entity framework. I am done with the deployment part and now i am trying to deploy it on GO DADDY server after deploying it so far every page is working fine but only in one page the following error is coming
Specified method is not supported.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NotSupportedException: Specified method is not supported.
i have tried a lot searching to find the solution of the error please help me with this
following is the snap shot of the error
You happen to have a query that results in the DbApplyExpression node in the command tree. This node is typically translated to CROSS/OUTER APPLY construct in SQL however MySQL does not support CROSS/OUTER APPLY. Most likely you will have to change your query a little bit to avoid the CROSS/OUTER APPLY. Take a look a this msdn article for more details. I also found something at DevArt website that can be helpful
Is there a way in Codeigniter to override global errors. For instance if an DB error or PHP critical occurs it wont show the error itself but something like 'Our admin guy is fixing the issue' and the error is just logged and emailed.
Codeigniter lets you handle error messages your way, depending on the HTTP status.
Refer to this documentation on error handling
In addition to #Pos5e5s3dFr3ak's answer, you should handle as many errors as you can manually. For example, if you have a database error, your code should acknowledge (or 'catch') it and perhaps load the appropriate view, or pass it onto a library that will log an email the fault, instead of displaying the intended result.
This method can be used as an alternative, or as an addition to the original answer - sometimes you need not locate the error just by its HTTP response Status Code.
As an example, you may find that the database engine in use is down. If this is the case (you would have to determine if it is indeed down - ie. you are not getting the desired response), you would pass the user on to example.com/error/database, for example.