In my odoo 10 after several month I am encountering the problem of Access Right for my users. When they want to group the tasks based on project, etc they face the following message:
Odoo Warning - Access Error
The requested operation cannot be completed due to security restrictions. Please contact your system administrator.
(Document type: project.project, Operation: read)
Any Idea?
Seeing your error its seems you have to give access rights for project.project model for read. If its given then might be there some record rule for project.project model in your database you have to check it.
Related
I use ledger nano S for https://wallet.betanet.near.org/, and the ledger nano S successful configuration. after I delete all key from my account and just keep 1 Full Access Key(create by ledger nano S).
Now I can't add other fullaccess key. Whatever method is used.when I did: near login --useLedgerKey. the web verify page will show:
An error occurred while approving this action. Please try again!
When I did add Seed Phrase enable, on the [Enter the following word from your recovery phrase to complete the setup process.] page, When I confirm it in the Ledger it will show:
An error occurred while setting up seed phrase recovery. Please try again!
Actually , my ledger still will show confirm info:
DANGER: This gives full access to a device other than Ledger
when I make a transaction push √ button. it still show the error:
An error occurred while approving this action. Please try again!
I think it's a bug, when use just keep 1 access key form ledger nano S.
enter image description here
enter image description here
my account : catcatcat.test
This is probably an error on the NEAR Wallet side. If you don't mind me asking, what is your account ID? I can better understand what is happening by viewing the chain activity associated with this.
Unfortunately it takes time to get new app version published in Ledger Live (even in Developer Mode). First version that got published (1.0.0) has the bug with adding full access keys.
As far as I know this bug is fixed in latest version available here:
https://github.com/LedgerHQ/app-near/pull/2
Best shot for now is to try compiling it from source following instructions in README:
https://github.com/LedgerHQ/app-near/blob/6a8d3263896fdf65ac06961c6e7ed6a9912d5480/README.md
After restructuring my Solution/Project files, converting my login listener out of required.js and into a module (setLoginManager), and ensuring that API changes were addressed ... I am getting the following error showing up at the browser level when the initial login page is being displayed.
Would appreciate any guidance ... appears to be a WAF related issue not related to my application>
Here is your error. You do not have describe permission for the YtdCatReport dataclass.
In v1, when you have read permission on a dataclass, it gets automatically the describe permission. It is fixed in v2 version. Now you have to explicitly set both permissions.
Add describe permission on the YtdCatReport dataclass as you did for read.
I am getting an error when attempting to create a new project for Google API at https://code.google.com/apis/console
I was hoping the error was temporary, but I have been unable to create a new project for a couple weeks now.
The error seems to have changed, as it used to include server ip information and a lot of other data. An example with some potentially private information removed:
APPLICATION_ERROR;google.cloudresourcemanager.projects.v1beta1/DeveloperProjects.CreateProject;com.google.apps.framework.request.StatusException:
generic::FAILED_PRECONDITION:
;AppErrorCode=9;StartTimeMs=1489595147198;tcp;Deadline(sec)=50.0;ResFormat=UNCOMPRESSED;ServerTimeSec=0.027545452117919922;LogBytes=256;FailFast;EffSecLevel=none;ReqFormat=UNCOMPRESSED;ReqID=removed;GlobalID=removed;Server=ip:port
Now the error is a lot shorter, although still seems to be related to the same cause:
com.google.apps.framework.request.StatusException: generic::FAILED_PRECONDITION:
The spinner in the dashboard appears to spin forever, while the error appears underneath alerts after a few seconds. I have tried numerous project names and all fail with the same error.
Is there some type of quota I am missing that is preventing this? The quota menu item requires me to select a project, which I don't have any.
Clicking on the error brings me to a page with the following message:
You don't have permissions to perform the action on the selected resource.
Make sure that the Google Developers Console is on for the user that is trying to create the project.
Admin.google.com > Apps > Additional Google services > Google Developers Console and turn on for any org or user that needs it.
Looks like there's another possible cause, in addition to the one that #AndrewL provided in his solution.
Short answer:
I ran into the same error when I attempted to associate a new GCP project with our billing account via Terraform. Our billing account has a default limit of 5 projects (which we had already met), and this blocked the association of new accounts and generated the Error 400: Precondition check failed., failedPreconditionerror message. To fix, I had to remove/delete one of the already associated projects before I could add a new one.
Long answser:
Here is the error message I encountered in Terraform (sensitive data and IDs redacted):
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
~ update in-place
Terraform will perform the following actions:
~ module.<MY MODULE PATH>.project
billing_account: "" => "<MY BILLING ACCOUNT ID>"
Plan: 0 to add, 1 to change, 0 to destroy.
Do you want to perform these actions?
Terraform will perform the actions described above.
Only 'yes' will be accepted to approve.
Enter a value: yes
module.<MY MODULE PATH>.project: Modifying... (ID: <MY PROJECT ID>)
billing_account: "" => "<MY BILLING ACCOUNT ID>"
Error: Error applying plan:
1 error(s) occurred:
* module.<MY MODULE PATH>.project: 1 error(s) occurred:
* google_project.project: Error setting billing account "<MY BILLING ACCOUNT ID>" for project "projects/<MY PROJECT ID>": googleapi: Error 400: Precondition check failed., failedPrecondition
Terraform does not automatically rollback in the face of errors.
Instead, your Terraform state file has been partially updated with
any resources that successfully completed. Please address the error
above and apply again to incrementally change your infrastructure.
My billing account was at its maximum of 5 projects. As a test, I removed one of the projects and then ran Terraform again. It then successfully added the new project to the billing account. To double check, I attempted to add yet another new project to the billing account (to push the amount to 6) and then received the same error message again.
Straight up deleting one of the associated projects also works.
It stands to reason that requesting a limit increase for your billing account's associated projects will also fix this issue.
Another possible reason for this error can be accessing the .xlsx file. If you are accessing this file using Google spreadsheet then you need to save the .xlsx file in to save as google sheets by choosing the option available in the File menu at the top.
Thanks
Another possible reason for this is Organization policy, denying the particular API on ORG/Folder/project level.
For me the error was working because I was trying to read the file from a shared google folder. Check if the drive where the file lives is your drive and not a shared one.
Hi Everyone this is my first question... its taken 4 years for me not to find the answer through others questions and google.
I am new to Oracle APEX 5 and administrating ORACLE APEX 5 for our DEV, System TEST and OQ environments and the DEV and ST environments have started producing this error when I try and click on a user to configure their passwords or changed their accounts to unlocked. I am using the ADMIN account which worked last month when I went in to reset a password for a developer. The error is below (I would rather have posted a screenshot but I am unable to as its my first question)
Internal Error Contact your administrator. Details about this incident are available via debug id "6818".
Can anyone tell me why this is happening and where to find the debug log or how to fix the problem?
Many thanks
Regards,
Helen.
This is an unhandled exception. We'd need to get the details of this exception to understand the problem better.
To find the details, you can either connect as SYS or SYSTEM (or someone granted the APEX_ADMINISTRATOR_ROLE database role) and run the following query:
select *
from apex_debug_messages
where page_view_id = 6818
order by message_timestamp asc;
By the way, this was so poorly documented, I decided to author a quick blog post about it. Thanks for the inspiration!
Joel
Thank-you for your reply
I got a few rows back from the query the one the sparked my interest is the following
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
I updated the admin password in previous months to not expire as this is not needed.. The password still expires though even with this set to no. So I entered 99999 as a way to bypass this. I just change the days to within the range requested above and the page now displays. Very silly mistake on my side in the end! Thank-you for the info as it is a great help to know where these DE-BUG ID's are stored
I am trying to move Azure resources to a different subscription/resource group within my account. Was able to move most resources but some gave error:
VALIDATION ERROR / ERROR TYPE Resource move validation failed. Please
see details. Diagnostic information: timestamp '20161130T144724Z',
subscription id '290b5843-765a-4b08-98a6-xxxxxxxxxx', tracking id
'd8616912-dfda-4bd0-853e-88e438a37ca5', request correlation id
'65f88afd-5e9f-47ba-ab17-a96b548d7e4b'. (Code:
ResourceMoveProviderValidationFailed)
The move resources request does not contain all the dependent resources. Please check error details for missing resource ids.
(Code: MissingMoveDependentResources)
I have tried looking through diagnostic logs and used Get-AzureRMLog command but have not been able to get information on the validation error or the dependent resource. Can someone tell me which resources are missing or how to get log details.
Checklist before moving resources
There are some important steps to perform before moving a resource. By verifying these conditions, you can avoid errors.
https://learn.microsoft.com/en-us/azure/azure-resource-manager/resource-group-move-resources