Is there a tool that I can use to validate my web.config? The reason I ask is that the file appears to be valid XML and IIS is complaining that file is invalid. No explanation or indication as to why.
Thanks in advance.
Edit:
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module IIS Web Core
Notification Unknown
Handler Not yet determined
Error Code 0x8007000d
Config Error
Config File \?\C:\DignityFiles\Source\simplicity\Simplicity\web.config
Requested URL http://simplicity-local.dignitytest.co.uk:80/
Physical Path
Logon Method Not yet determined
Logon User Not yet determined
Config Source:
-1:
0:
More Information:
This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information » [This takes you to "https://support.microsoft.com/en-gb/help/942055/-http-error-500-19-error-when-you-open-an-iis-7-0-webpage"]
Link to the web.config (Note: sensitive information has been redacted)
I have (eventually) found the answer: https://stackoverflow.com/a/41267673
Installing the URL rewrite module fixed my issue.
This answer addressses the immediate concern, but if you are looking for a general solution in powershell I have created a function that addresses this.
The full answer is here: how do i validate an IIS web.config in powershell
But the gist of it is you have to find all the "filters" and test each of them individually via Get-WebConfiguration
Related
I put a downloaded file from DVWA in /opt/lampp/htdocs
and change config.inc.php.dist to config.inc.php
but when I open localhost/DVWA this is what shows up:
This page isn’t working localhost is currently unable to handle this
request. HTTP ERROR 500
From the spec:
The 500 (Internal Server Error) status code indicates that the server
encountered an unexpected condition that prevented it from fulfilling
the request.
Since this is the only piece of information you are delivering, some suggestions may be :
Check what the error log file says. You can find it in this location /opt/lampp/logs/error_log . You will find more information about the problem there
Check this question, I think that your problem is similar to that one, checking it may help you.
I have my website hosted on IIS with window 2016 OS. When I am going to disable the Form Authentication under IIS, it is giving me the following error.
Form Authentication.
Exception from HRESULT: 0xC00CEF03
i had a similar issue but it occurred when i was trying to disable the 'Machine key' - 'automatically generate at runtime' and then Applying the same.
For your error, please verify if the authentication is enabled/disabled for Default Web-site. Change that setting and then try disabling you specific websites status. It should ideally work.
I've seen this error stem from three different controls on the authentication method:
If configuring the authentication method on an application, and the authentication method you're trying to disable is enabled on the containing site.
If configuring the authentication method on a site, and the authentication method you're trying to disable is enabled on the Default Web Site.
If configuring the authentication method that has been defined in a web.config file. You should adjust it in the config file.
0xC00CEF03 error code translates to WR_E_NSPREFIXWITHEMPTYNSURI which refers to “Writer: cannot use prefix with empty namespace URI” (Reference).
This error occurs when there is something wrong with the web.config file. It’s probably corrupted or there are incompatible tags and parameters. As a result of this corruption and incompatibility, IIS is not able to read this file. Therefore, it can’t make a change.
The issue mostly happens after migration because a piece of configuration that works in the older version of IIS (and .NET Framework) probably became unsupported in the newer version.
The shortest way of finding what part of the web.config is causing the issue is to remove sections one by one and test. High-level steps:
Remove a section from the bottom of the file (Let’s say you removed system.serviceModel section)
If the issue goes away, add the section back and start removing the subsections of it one by one. (For example, ws2007HttpBinding subsection in system.serviceModel section)
If the issue goes away again, bring the subsection back and go through each lines. Prefixes like wsid:, asm:, and trust: are the most common causes of this issue
Source: 0xC00CEF03 error (Cannot use prefix with empty namespace URI)
would you please tell me what i did wrong with my service worker installation, i have those errors appear in chrome console (see the image-1).
The script resource is behind a redirect, which is disallowed. service-worker.js:1
Failed to load resource: net::ERR_UNSAFE_REDIRECT https://harampress.com/post/45/service-worker.js
i use Laravel framework in backend if that could help
just to know that my service-worker.js is in the root of the website, works fine on home page no errors on chrome console, but the moment i try to navigate to a post for example, those two errors appears (see image-2).
knowing that i use sw-precache and sw-toolbox, i generate the service worker useing sw-precache with gulp.
image-1
image-2
see the solutions here on github discussion
the message from the discussion in github that actually answered to my problem :
What #wanderview means is that when you do
navigator.serviceWorker.register('/sw.js')
The actual requesting URL is the sw.js located in the root
but when you do
navigator.serviceWorker.register('sw.js')
This is actually a Relative URL so what you actually request might be /post/blah/sw.js and your server might treat it as 404 and do some redirect.
Hello I am Developing a ASP.NET MVC3 application and MYSQL Database accessed by entity framework. I am done with the deployment part and now i am trying to deploy it on GO DADDY server after deploying it so far every page is working fine but only in one page the following error is coming
Specified method is not supported.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NotSupportedException: Specified method is not supported.
i have tried a lot searching to find the solution of the error please help me with this
following is the snap shot of the error
You happen to have a query that results in the DbApplyExpression node in the command tree. This node is typically translated to CROSS/OUTER APPLY construct in SQL however MySQL does not support CROSS/OUTER APPLY. Most likely you will have to change your query a little bit to avoid the CROSS/OUTER APPLY. Take a look a this msdn article for more details. I also found something at DevArt website that can be helpful
I followed this guide here http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj681689%28v=vs.105%29.aspx#IAP_MockService to set a IIS service for in-app purchase testing, but when I try to open http://localhost/v8/help I am getting the message bellow
HTTP Error 403.14 - Forbidden
The Web server is configured to not list the contents of this directory.
Detailed Error Information:
Module DirectoryListingModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x00000000
Requested URL
http://localhost:80/v8/help/
Physical Path C:\IapcatalogMockService\CatalogServiceMock\v8\help\
Logon Method Anonymous
Logon User Anonymous
Anybody knows what is wrong ?
I will appreciate any help.
Thank you.
I have the some problem.
Then solved by use source code to rebuild the website and re-deploy.
Some time, after re-deploy it show config section error, you can just remove the config section in web.config file.
It works for me.