For some reasons I had to uninstall/reinstall homebrew on my MacBook Pro (OS X 10.9).
I wanted to reinstall swi-prolog via homebrew (like I did the first time). The installation process worked without any visible issue, but now every time in want to run swi-prolog in my terminal this message appears: "Abort trap: 6"
I have no clue of what that means. There is a lot of things about this message on the internet but I can't relate them with my issue.
Could you help me?
For some reason it seems that the symbolic link doesn't work correctly. In my version of swi-prolog I had to type the full path to get it to run correctly, for example:
/usr/local/Cellar/swi-prolog/6.4.1/bin/swipl
Remember to keep in mind that your version number could be different than what I have listed above.
This became extremely tedious however to remember when having to type it every time I wanted to use Prolog, so I was able to add it as an alias with this command:
alias prolog='/usr/local/Cellar/swi-prolog/6.4.1/bin/swipl'
From that point on in the current terminal session, I was able to open it by just typing:
prolog
This way is obviously much easier, however you need to remember to change the alias if the version also changes.
The command "prolog" can of course be exchanged with any command you wish to use.
Keep in mind, if you want this command to be more permanent (as in after you close the terminal window), you will need to also add the above alias command to the ~/.bash_profile file so it runs on startup.
Hope this helps!
if i am not mistaken, swi-prolog required x11 to run but now in mac 10.9, there were no x11 anymore instead of xQuartz.
i am not sure if this is the real problem now.
Related
Greetings fellow problem solvers.
I'll start by saying my level of expertise regarding coding/anything compsci is somewhere right above ZERO (intro to java last semester & currently teaching myself python, but that's it). Also I have a macbook air running 10.14.6(mojave). Ok, here are my questions.
What I did:
I installed macvim version 8.1.2234 before realizing my machine was shipped with vim 8.0.1365 preinstalled. I installed macvim using the download .dmg & "drag/drop to applications" method.
What I'd like to know:
Firstly, MacVim and Vim appear to be separate programs (when I type mvim -v as opposed to vim -v in the terminal, each one shows a different version number as described above). So, how can I remove/replace/update/overwrite or whatever, so that I only have either macvim or vim? I don't really care which one I have as long as I only have one
--> Before telling me to just rename an alias so that one maps to the other, please read the info below <--
I REALLY don't want two nearly identical programs on my computer because, a)it seems like a waste a space b)don't want the possibility of accidentally saving something to the wrong place, or calling something from the wrong place, but mostly c)so I can sleep at night.
That being said, do I NEED both? Does macvim rely on vim to work or do they both exist and work independently? Also does renaming an alias mean that the other will be replaced? Because I would assume that just renaming one would be a lot like having two houses, but making both driveways only go to one house.
Additional info: I have do homebrew but I didn't install macvim using homebrew. I found another post recommending to use (i don't remember exact syntax but something like..) $brew overwrite vim--with-macvim. So I thought great, I'll uninstall macvim since I haven't used it at all yet, and then I'll re-download using the homebrew overwrite method. But then I read that it's a little more complicated than moving the "Vim" folder to the trash, and after two unsuccessful attempts in the terminal that looked like this:
$brew uninstall mvim (throws no keg error)
$brew uninstall macvim (same error)
I decided to reach out for help before I break anything.
Thanks in advance for any info/advice, it is much appreciated!
I don’t have time for a longer explanation at the moment, but:
Breathe Easy
MacVim is nearly completely independent from (terminal) vim. They do share your vimrc, but MacVim also reads gvimrc, and uses its own runtime directories.
You’re not wasting much space, and it would be a Bad Idea™️ to mess with the system installation of some programs.
I met a problem when I use prolog(swipl), after I type swipl in the terminal, code like '^[[A^[[B^[[D^[[C' shows when I press up, down, left, and right on my keyboard.
Could somebody explain why? and how to fix it.
Thanks in advance!
This means the readline/editline functionality isn't working. If you built it yourself, you probably have to install the development version of one of those libraries first and then rebuild. Or you can install rlwrap and do rlwrap swipl (which is helpful for other commands as well).
Whenever I start terminal on my Macbook Pro it is running a process. I have to use ctrl+C to kill it. If I close the window directly it warns me that following processs are running: login, bash, bash, perl5.12.
Any idea what might be going on here and how I get back to the normal state?
I personally had this issue a while ago. First check to see if it is from one of your profiles. Assuming you are using bash, we will look at your bash profile.
First, make sure the problem is actually stemming from your bash profile. Source the scrips as follows.
source ~/.bash_profile
source ~/.profile
If after running those you observe the same hanging problem where you have to cntrl+c, then you know what script has the problem.
The best way to remedy the situation is to comment out different parts of your script to figure out where the problem is. Backup your profile and then comment out half of your profile and do a
source ~/.bash_profile
and if it hangs or not will tell you what half the problem is on. Keep repeating this until you find the problem. It sounds longer than it actually is.
Here is what I want to do:
I want to run Mathematica on another Mac from my Mac (both Snow Leopards). I want to do this because the remote Mac has multiple cores/processors while my local Mac is rather shabby. I would like to have the front end still locally (i.e. the graphical interface).
What I've learned:
I used to do this type of thing from multiple Linux machines and was expecting to have similar success for Mac-to-Mac operation. However no such luck.
The problem seems to be a display issue (front end).
Mac front end runs in Aqua while X11 is what is really needed (this is why there is no problem on Unix). While Macs have X11, for some reason Mathematica can't use it.
So how do I get around this issue?
Possible solutions that I have had to rule out are: 1. screen sharing. Not practical since someone else will be using the remote Mac on another account. Screen sharing only uses the active screen. 2. Installing Unix on the remote computer. Not possible in my situation.
Thanks.
You should be able to set up a remote kernel on the other Mac. This is done through the Evaluation > Kernel Configurations menu item. The you can set the remote kernel for a given notebook using Evaluation > Notebook's Kernel or globally via Evaluation > Default Kernel.
I haven't done this in a while, and it's sometimes useful to test things from a terminal with something like
ssh <user>#<remote.machine.com> </path/to/remote/Mathematica.app/Contents/MacOS/MathKernel>
Why not use the command line kernel? I have a script math which does:
#!/bin/bash
rlwrap /Applications/Mathematica.app/Contents/MacOS/MathKernel
I built rlwrap from source, but basically that tool gives you readline behaviors. You can just do
ssh remote-machine /Applications/Mathematica.app/Contents/MacOS/MathKernel
The only solution, I believe, is for you to upgrade to OS X Lion. It allows simultaneous screen sharing sessions where each user can control the screen for their own account:
http://www.apple.com/macosx/whats-new/features.html#screensharing
I'm trying to get Wanderlust working in Windows to connect to Gmail. Compiling the code is much more painful than expected. Here are the barriers so far:
Can't download dependent packages: SEMI, APEL, and FLIM. I eventually found newer versions, but I'm not sure they will work. Anyone have the older versions?
Needs make and install. I used MSYS and it seems to have compiled okay.
SSL support. I was getting a "Cannot open load file: ssl" error. I found an ssl.el that comes with w3. So installed w3.
Bash command in ssl.el: ssl-get-command is running something from /bin/sh (not a directory I have in Windows). I really don't want to refactor this code. Is there a better way?
Others speak very highly of Wanderlust, so I want to give it a try. I feel like I'm almost there, but am pretty much worn out with all the crazy configuration I have to do. Does anyone have this working on Windows? I'm pretty sure it will work with Gmail, because of this post. But will it work in Windows too? If you have a few pointers, please help.
ssl.el is part of wanderlust. Just look in the wanderlust/utils directory.
For STARTTLS you may either use the starttls or gnutls-cli programs.
Unfortunately, both of these programs use signals (SIGALRM to be precise) which are not supported on Windows.
You need to use the Cygwin ports of these programs -- not MSYS!
Additionally, if you're using a Windows port of Emacs (ie. not Cygwin's emacs) you need to modify starttls.el (which is part of GNU Emacs) because the signal-process function doesn't do anything regarding SIGALRM. Replace all instances of
(signal-process (process-id process) 'SIGALRM)
with
(call-process kill-program nil nil nil
"-ALRM" (format "%d" (process-id process)))
and initialize kill-program somewhere apropriately to point to cygwin's kill.exe:
(setq kill-program "c:/cygwin/bin/kill.exe")
If you want to use SSL you have to set ssl-certificate-verification-policy to a value greater than 0. Otherwise connecting to Gmail would fail.
Using the wl configuration here:
http://box.matto.nl/emacsgmail.html
After adding ssl.el from here:
http://quimby.gnus.org/cgi-bin/cvsweb.cgi/gnus/contrib/ssl.el
I am able to get wanderlust talking just fine to gmail on a linux configuration of wanderlust, and since the ssl.el file there isn't really system-dependent (although it does require the openssl command-line tools), I don't see that there should be any problem with it working on msys.
The 'cannot open load file: ssl' error is exactly what I ran into until I installed that ssl.el file too :)
Edit; Just in case you have trouble finding it, the MSYS port of openssl you'll want is here:
http://sourceforge.net/projects/mingw/files/MSYS%20openssl/
[posted as a new answer since I think you'll get a notification that way :)]
I recently installed wl on a linux host, and had the same issue with not being able to locate the dependencies as specified. However, I, like you, found the 'more recent versions' and used them. They did indeed work fine, so unless those new versions have added any incompatibility with windows, they shouldn't present any problem.
The error you're receiving is because it's not finding the 'install' utility, which is part of GNU coreutils. Autotools (and it's family) depend on install being able to work, so if you want to continue with the cygwin method, then installing autotools should bring in the install program.
(I have no idea if wl will compile/work using cygwin otherwise, though.)