Afters hours and hours spend on trying to install zephir on my windows 8, i finally managed to build an single .zep file !
Now, i've copied the .dll from /ext/Release directory, into my xampp/php/ext and added the extension=.dll in my php.ini - I'm using latest xampp with php 5.5.24 - and when I restart my Apache, the httpd.exe throws an error "The program can't start because php5.dll is missing form your computer". I'm really baffled by this eror, searching on net for the last hours and I can't find an answer !
Does anyone had this issue before ?
Problem 2) I've install vagrant and followed the tutorial from blog, and managed to install everything.Then I went to /vagrant directory as it is shared between the host and the guest, used zaphir init , all the files were generated, then copied my .zep file from my windows host into the right directory and runned zephir build. Again all went fine, the .so file was created but as my main development platform is on windows, i wanted to use the files from /etc/ to build the .dll extension for my xampp installation - to be honest i didn't tried to use the .so extension and test if the extension works on linux - .
Now, using the Developer Command Promt for Visual Studio 2012, i tried to run command "cl .c" inside the /ext/ directory that was build by zaphir on linux, but an fatal error its appearing in my developer command promt "Fatal error C1083: Cannot open include file: php.h: No such file or directory"
The greatest way for me would be to compile the extension for both windows, my dev. pc but for linux also !
Could please someone help me with this issues ? Give me some guidance as I have to admit, I don't have knowledge about developing/compiling in C !
Thank you
Have you followed https://github.com/phalcon/zephir/blob/master/WINDOWS.md ?
I generally do not recommend xampp since it uses the TS version of PHP.
This means you generally have to replace anything in the manual
containg NTS with TS.
(The most important part is that you download a devpack for TS insteadof NTS, as the manual specifies.)
Related
I have downloaded and installed a Windows native compiled OpenFOAM from here. But when I try to run any of the OF commands (e.g., blockMesh, foamDictionary, ...) in the MSYS2 terminal I get the message:
path/to/folder/v2106/msys64/home/ofuser/OpenFOAM/OpenFOAM-v2106/platforms/win64MingwDPInt32Opt/bin/blockMesh.exe: error while loading shared libraries: libstdc++-6.dll: cannot open shared object file: No such file or directory
and in the cmd terminal, I get the error message:
System Error The code execution cannot proceed because msmpi.dll was not found. Reinstalling the program may fix this problem.
From here, I see that I might have to reinstall OpenFOAM in admin mode, which I don't have on this work machine. so I tried installing MSMPI using pacman -S msmpi as I used to do here. But I get the error message:
error: target not found: msmpi
My goal is to install and use the OpenFOAM software, doesn't matter which release, on this Windows machine without admin privileges. I would appreciate it if you could help me know how can I fix the above problems, or find another way around.
P.S.1. Searching the installation directory, I see that the libstdc++-6.dll file is in the path\to\folder\v2106\msys64\home\ofuser\OpenFOAM\OpenFOAM-v2106\platforms\win64MingwDPInt32Opt\bin. So I wonder I get the first error message. Maybe OF is not compiled properly against the library? Should I try removing the path\to\folder\v2106\msys64\usr\lib\gcc\x86_64-pc-msys\7.4.0\libstdc++.dll.a as suggested here?
P.S.2. I had written this post ages ago about different ways to install OpenFOAM on Windows. Sadly it is still a big effort to get it up and running.
P.S.3. A follow-up on this issue here on the MSYS2 Discord server.
P.S.4. Opened a new issue here on the OpenFOAM repository.
With OpenFOAM-v2112 it is now possible to install without windows admin permissions.
The original problem will still be evident with older OpenFOAM versions since they relied on installing msmpi separately.
I would require some guidance in regards to installing a module/package in pycharm (free edition). I have to mention that i have not worked with this IDE yet and wanted to try it out on a little project containing smartcards.
When i try to install "pyscard" i get the error that boils down to
error: command 'swig.exe' failed: No such file or directory
People say just install SWIG, which i guessed already ^^.
The issue i have is that i actually have no idea how to... and none of the pages i found has really enlightended me on this issue.
I downloaded the zip "swigwin-3.0.12" but i am at a loss what to do with it now. EDIT: According to the SWIG page this is an already compiled version and i have to somehow make pycharm recognize that the folder it is in contains the swig.exe it requires.
EDIT2: Adding the folder containing the swig.exe to the PATH variable also did not work ... which i thought would be the issue
EDIT3+Answer:
Ok the link in the comments from "wp78de" was correct my problem was that pycharm/pc restart were needed for it to catch the added PATH variable to the swig.exe (for pycharm that is)
Any advice is appriciated.
Envoirment:
Windows 8.1 Pro 64-bit
Pycharm 2017.2.4
Python 3.6
Basically, you just have to add the directory that contains the swig executable the PATH environment variable. You can do it via CMD or the Windows UI.
If you have added swig to your path, you should be able to call it in the command prompt from any directory: open "cmd", and type swig --help" on that prompt.
A restart of PyCharm (or whatever your IDE is) and Windows might be required.
first question ever on here, so bear with me :) I've been on the web for the past 3 days trying to find a way to get the following result on my windows machine.
example of 'cURL -V' output I need
I've found a lot of stuff for macOS and unix, but only bits and pieces for Windows. I'm running xampp, and ultimately I'm trying to get it to send http/2 requests through cURL/PHP. What I've gathered so far is that I need cURL to be compiled with some libraries, like openssl (at least 1.0.2), libcurl with http/2 enabled, and nghttp2. I feel like I'm very close but I'm just missing some steps.
What I've done so far:
installed things like mingw32, cmake, and Build Tools for Visual Studio 2017
downloaded nghttp2-1.27.0, and used 'cmake' and 'cmake --build' to get the 5 files: nghttp2.dll, .exp, .lik, .lib, and .pdb
downloaded curl-7.56.1.tar.gz (the very first one on https://curl.haxx.se/download.html)
downloaded libssh2-1.8.0
downloaded openssl-1.0.2l
downloaded zlib-1.2.11
followed instructions for Mingw32 on https://curl.haxx.se/docs/install.html (but it keeps giving me the error 'cannot find openSSL package')
I read somewhere that I need to compile cURL with the '--with-nghttp2 --prefix-[LOCATION OF NGHTTP2 FOLDER HERE]' flag, so I tried something that I thought would work, but I don't think it did: 'cmake --with-nghttp2 --prefix-[LOCATION OF NGHTTP2 FOLDER HERE] . ', then 'cmake install . ' and it looked like it did something, but the cURL.exe that was built inside curl-7.56.1/src/ did not have anything else but libcurl.
Any suggestions or pointers will be greatly appreciated! Thank you guys :)
Ok, I was finally able to build Curl on Windows with http/2 support.
This is what worked for me, step by step:
Downloaded "Build Tools for Visual Studio 2017" to be able to build from the command line (provides nmake and required Windows SDK libraries and header filtes)
downloaded the latest version of curl, like stated above (curl-7.56.1.tar.gz, aka for me the very first one on https://curl.haxx.se/download.html)
extracted it inside c:/curl, so I ended up with c:/curl/curl-7.56.1
read instructions BUILD.WINDOWS.txt inside c:/curl/curl-7.56.1/winbuild and proceeded to http://windows.php.net/downloads/php-sdk/deps/ to download the 4 libraries that I needed. I just grabbed the VC15/x86 versions.
created a new folder named "deps" inside c:/curl/curl-7.56.1
created the following 3 folders inside c:/curl/curl-7.56.1/deps: bin, lib, and include
extracted each library I just downloaded in the corresponding 3 folders
opened Developer Command Prompt for VS 2017
cd c:/curl/curl-7.56.1/winbuild
nmake -f Makefile.vc mode=dll WITH_DEVEL=c:/curl/curl-7.56.1/deps WITH_SSL=dll WITH_NGHTTP2=dll WITH_ZLIB=static WITH_SSH2=dll
this builds a CURL executable inside one of the subfolders in c:\curl\curl-7.56.1\builds
when I first tried running CURL, it showed an error saying missing libssl-1_1.dll and libcrypto-1_1.dll, so I had to copy them from c:\curl\curl-7.56.1\deps\bin to the same directory where the newly built curl.exe is
Note: since zlib didn't come with a bin folder containing any .dll's, I understand why I had to mark zlib as static with the WITH_ZLIB=static flag. What I don't get is why I had to manually move the openssl .dll's in the new directory. Any thoughts?
PS: thank you Daniel for pointing me in the right direction. I didn't even notice the /winbuild directory.
PPS: As you can probably tell, I had no idea what I've been doing 90% of the time. Probably why it took me 5 days to figure it out ;)
I am trying to install mingw-w64 onto Windows. However I receive an error, "the file has been downloaded incorrectly". Redownloading the setup file again from sourceforge does not fix the problem. Is there an alternative way to install it or am I doing something wrong?
Old post but same problem, the installer doesn't seem to work.
I give the solution which works for me
You can directly download the archive of MinGW64 with your chosen configuration :
https://sourceforge.net/projects/mingw-w64/files/mingw-w64/
Once the compressed file downloaded, you have just to extract and copy/paste the MinGW64 folder( with the pre-compiled librairies) to your chosen folder ( in my case : C:\mingw64)
I got same error and solved it, after struggling a few hours. You should download MinGW64 via https://winlibs.com/#download-release.
After downloading, You should unzip mingw64 file to a folder(in my case I unzipped it to c disk; C:\mingw64)
And then you have to set up path. for that follow below steps;
open settings.
Search for Edit environment variables for your
account.
choose path variable and then select edit.
Select New and add the Mingw-w64 folder path(bin folder). In my case, I added (C:\mingw64\bin).
Select OK to save the updated path.
And reopen your cmd, then check if everything is good by typing; gcc --version
Long story short, the official installer is broken and not been fixed for years, so we have to install it manually.
The official download link above would bring you to sourceforge: https://sourceforge.net/projects/mingw-w64/files/Toolchains targetting Win32/Personal Builds/mingw-builds/installer/mingw-w64-install.exe
And in the same folder that contains the installer, there's a repository.txt. (about this file)
Take a look at it, the installer basically just download and unzip the build from one of these urls within repository.txt. Choose the url you want and download/upzip it manually. (In my case, I use 8.1.0|x86_64|posix|seh|rev0 setup)
Last, setup the Path environment variable pointing to your unzipped bin folder, let say C:\mingw64\bin, and this should do the trick.
Finally, I solved this problem by downloading this:http://winlibs.com/
GCC 10.1.0 + LLVM/Clang/LLD/LLDB 10.0.0 + MinGW-w64 7.0.0 - release 3 (LATEST)
Win32: 7-Zip archive* | Zip archive
Win64: 7-Zip archive* | Zip archive
and set the %path%
After that, I still can't execute gcc correctly, but then I solved the problem by adding this environment variable:
"CGO_ENABLED=1"
I encountered the problem when using this golang package: https://github.com/mattn/go-sqlite3
I received the same error. When I re-ran the installer as an adminstrator it was installed successfully.
I also made sure not to add any spaces to the installation path.
Following this tutorial helped me manually install MinGW for windows : youtube
So the problem for me was that when I tried to use the .exe installer, it either showed me that,
"the file has been downloaded incorrectly" , or , the /.../bin folder did not have any files in it.
In the link above, the MinGW files (including the /bin files) were manually downloaded and identified properly by the Environment Variables.
The problem is with your internet connection and/or ISP. I'm not great at networking so I'll let others be more specific. I tried installing/downloading it using my mobile's data as wifi hotspot and it worked. Hope it helps
I downloaded bitcloud, the atmel zigbee stack and I am trying to compile one of the default applications, ZLLDemo.
It is located currently at:
C:\Users\Ryan\Desktop\BitCloud_MEGARF_3_1_0\Applications\ZLLDemo\atmelStudio_projects\ATmega256RFR2.cproj
Everytime I try to compile the application I get a windows message screen for "mkdir.exe" error 0xc0000142. In the Output screen I see the line "make: *** [directories] Error -1073741502"
This same error and error code occurs later in the build process for cp.exe if I manually make the folders myself.
I have tried the following things to fix the error:
Change folder and contents to different owners, everyone having full
privileges
run make command manually from a command prompt window as admin
clean solution before retrying
all other examples files
ran directly from C: as "C:\BitCloud_MEGARF_3_1_0\Applications\ZLLDemo\atmelStudio_projects\ATmega256RFR2.cproj" - as per general suggestion for the windows error I tried
"sfc /scannow" in case mkdir had somehow been corrupted
Changed AppInitDLLs Reg key to 0 to load all DLLs at start of application
Disabled Internet security
Does this have a general fix or is there perhaps something else at work here? General compilations work, its just external ones. My friend did the same and it seems to work just fine for him.
Windows 8.1
Atmel Studio 6.2
Avrfreaks had a solution that I finally found here.
Their solution is to download an old version of the msys file for winavr. Which means that their is something more than likely wrong with the latest version of winavr for windows 8.1
sebastor wrote:
I found solution.
Copy this file:
http://www.madwizard.org/download/electronics/msys-1.0-vista64.zip
to utils\bin directory (WinAVR)