I am trying to install mingw-w64 onto Windows. However I receive an error, "the file has been downloaded incorrectly". Redownloading the setup file again from sourceforge does not fix the problem. Is there an alternative way to install it or am I doing something wrong?
Old post but same problem, the installer doesn't seem to work.
I give the solution which works for me
You can directly download the archive of MinGW64 with your chosen configuration :
https://sourceforge.net/projects/mingw-w64/files/mingw-w64/
Once the compressed file downloaded, you have just to extract and copy/paste the MinGW64 folder( with the pre-compiled librairies) to your chosen folder ( in my case : C:\mingw64)
I got same error and solved it, after struggling a few hours. You should download MinGW64 via https://winlibs.com/#download-release.
After downloading, You should unzip mingw64 file to a folder(in my case I unzipped it to c disk; C:\mingw64)
And then you have to set up path. for that follow below steps;
open settings.
Search for Edit environment variables for your
account.
choose path variable and then select edit.
Select New and add the Mingw-w64 folder path(bin folder). In my case, I added (C:\mingw64\bin).
Select OK to save the updated path.
And reopen your cmd, then check if everything is good by typing; gcc --version
Long story short, the official installer is broken and not been fixed for years, so we have to install it manually.
The official download link above would bring you to sourceforge: https://sourceforge.net/projects/mingw-w64/files/Toolchains targetting Win32/Personal Builds/mingw-builds/installer/mingw-w64-install.exe
And in the same folder that contains the installer, there's a repository.txt. (about this file)
Take a look at it, the installer basically just download and unzip the build from one of these urls within repository.txt. Choose the url you want and download/upzip it manually. (In my case, I use 8.1.0|x86_64|posix|seh|rev0 setup)
Last, setup the Path environment variable pointing to your unzipped bin folder, let say C:\mingw64\bin, and this should do the trick.
Finally, I solved this problem by downloading this:http://winlibs.com/
GCC 10.1.0 + LLVM/Clang/LLD/LLDB 10.0.0 + MinGW-w64 7.0.0 - release 3 (LATEST)
Win32: 7-Zip archive* | Zip archive
Win64: 7-Zip archive* | Zip archive
and set the %path%
After that, I still can't execute gcc correctly, but then I solved the problem by adding this environment variable:
"CGO_ENABLED=1"
I encountered the problem when using this golang package: https://github.com/mattn/go-sqlite3
I received the same error. When I re-ran the installer as an adminstrator it was installed successfully.
I also made sure not to add any spaces to the installation path.
Following this tutorial helped me manually install MinGW for windows : youtube
So the problem for me was that when I tried to use the .exe installer, it either showed me that,
"the file has been downloaded incorrectly" , or , the /.../bin folder did not have any files in it.
In the link above, the MinGW files (including the /bin files) were manually downloaded and identified properly by the Environment Variables.
The problem is with your internet connection and/or ISP. I'm not great at networking so I'll let others be more specific. I tried installing/downloading it using my mobile's data as wifi hotspot and it worked. Hope it helps
Related
I would require some guidance in regards to installing a module/package in pycharm (free edition). I have to mention that i have not worked with this IDE yet and wanted to try it out on a little project containing smartcards.
When i try to install "pyscard" i get the error that boils down to
error: command 'swig.exe' failed: No such file or directory
People say just install SWIG, which i guessed already ^^.
The issue i have is that i actually have no idea how to... and none of the pages i found has really enlightended me on this issue.
I downloaded the zip "swigwin-3.0.12" but i am at a loss what to do with it now. EDIT: According to the SWIG page this is an already compiled version and i have to somehow make pycharm recognize that the folder it is in contains the swig.exe it requires.
EDIT2: Adding the folder containing the swig.exe to the PATH variable also did not work ... which i thought would be the issue
EDIT3+Answer:
Ok the link in the comments from "wp78de" was correct my problem was that pycharm/pc restart were needed for it to catch the added PATH variable to the swig.exe (for pycharm that is)
Any advice is appriciated.
Envoirment:
Windows 8.1 Pro 64-bit
Pycharm 2017.2.4
Python 3.6
Basically, you just have to add the directory that contains the swig executable the PATH environment variable. You can do it via CMD or the Windows UI.
If you have added swig to your path, you should be able to call it in the command prompt from any directory: open "cmd", and type swig --help" on that prompt.
A restart of PyCharm (or whatever your IDE is) and Windows might be required.
first question ever on here, so bear with me :) I've been on the web for the past 3 days trying to find a way to get the following result on my windows machine.
example of 'cURL -V' output I need
I've found a lot of stuff for macOS and unix, but only bits and pieces for Windows. I'm running xampp, and ultimately I'm trying to get it to send http/2 requests through cURL/PHP. What I've gathered so far is that I need cURL to be compiled with some libraries, like openssl (at least 1.0.2), libcurl with http/2 enabled, and nghttp2. I feel like I'm very close but I'm just missing some steps.
What I've done so far:
installed things like mingw32, cmake, and Build Tools for Visual Studio 2017
downloaded nghttp2-1.27.0, and used 'cmake' and 'cmake --build' to get the 5 files: nghttp2.dll, .exp, .lik, .lib, and .pdb
downloaded curl-7.56.1.tar.gz (the very first one on https://curl.haxx.se/download.html)
downloaded libssh2-1.8.0
downloaded openssl-1.0.2l
downloaded zlib-1.2.11
followed instructions for Mingw32 on https://curl.haxx.se/docs/install.html (but it keeps giving me the error 'cannot find openSSL package')
I read somewhere that I need to compile cURL with the '--with-nghttp2 --prefix-[LOCATION OF NGHTTP2 FOLDER HERE]' flag, so I tried something that I thought would work, but I don't think it did: 'cmake --with-nghttp2 --prefix-[LOCATION OF NGHTTP2 FOLDER HERE] . ', then 'cmake install . ' and it looked like it did something, but the cURL.exe that was built inside curl-7.56.1/src/ did not have anything else but libcurl.
Any suggestions or pointers will be greatly appreciated! Thank you guys :)
Ok, I was finally able to build Curl on Windows with http/2 support.
This is what worked for me, step by step:
Downloaded "Build Tools for Visual Studio 2017" to be able to build from the command line (provides nmake and required Windows SDK libraries and header filtes)
downloaded the latest version of curl, like stated above (curl-7.56.1.tar.gz, aka for me the very first one on https://curl.haxx.se/download.html)
extracted it inside c:/curl, so I ended up with c:/curl/curl-7.56.1
read instructions BUILD.WINDOWS.txt inside c:/curl/curl-7.56.1/winbuild and proceeded to http://windows.php.net/downloads/php-sdk/deps/ to download the 4 libraries that I needed. I just grabbed the VC15/x86 versions.
created a new folder named "deps" inside c:/curl/curl-7.56.1
created the following 3 folders inside c:/curl/curl-7.56.1/deps: bin, lib, and include
extracted each library I just downloaded in the corresponding 3 folders
opened Developer Command Prompt for VS 2017
cd c:/curl/curl-7.56.1/winbuild
nmake -f Makefile.vc mode=dll WITH_DEVEL=c:/curl/curl-7.56.1/deps WITH_SSL=dll WITH_NGHTTP2=dll WITH_ZLIB=static WITH_SSH2=dll
this builds a CURL executable inside one of the subfolders in c:\curl\curl-7.56.1\builds
when I first tried running CURL, it showed an error saying missing libssl-1_1.dll and libcrypto-1_1.dll, so I had to copy them from c:\curl\curl-7.56.1\deps\bin to the same directory where the newly built curl.exe is
Note: since zlib didn't come with a bin folder containing any .dll's, I understand why I had to mark zlib as static with the WITH_ZLIB=static flag. What I don't get is why I had to manually move the openssl .dll's in the new directory. Any thoughts?
PS: thank you Daniel for pointing me in the right direction. I didn't even notice the /winbuild directory.
PPS: As you can probably tell, I had no idea what I've been doing 90% of the time. Probably why it took me 5 days to figure it out ;)
I need a terminal that will support svn on windows and I found that MobaXterm is one of them. However going to their plugin installation page which says:
To install these plugins, just download them and put them in the same directory than the MobaXterm executable.
So I downloaded it and put it in the file
C:\Program Files (x86)\Mobatek\MobaXterm Personal Edition however I still get the error message
Sorry: Svn is not included in this version of MobaXterm.
You can check online if you find a Svn plugin for MobaXterm
by ctrl+clicking here: http://mobaxterm.mobatek.net .
If you need a custom version of MobaXterm that includes Svn,
do not hesitate to ask us for a quotation: mailto:contact#mobatek.net .
Does anyone have experience with this software or recommended a terminal that can support svn in windows?
You need to go into the C:\Program Files (x86)\Mobatek\MobaXterm Personal Edition or whichever edition you have and place the plugin there. Restart MobaXterm and it should work.
I normally collect all the plugins which I require from http://mobaxterm.mobatek.net/plugins.html
Once the .mxt3 files are getting downloaded, I moved them to the installed folder where the MobaXterm_.exe is there.
After restarting MobaXterm, this will work like a champ.
Hope if this solves your issue faster.
Start MobaXterm terminal.
Type MobApt or apt-get. This will open MobApt package manager.
Once in the package manager, you have a variety of tools/commands that you can install by simply selecting and pressing Install/Update.
i know the question is old. but you should put the plugin into your home.
if you check the setting you see this is the home directory
%CurrentDrive%:\Users\USERNAME\Documents\MobaXterm\home
witch is :
C:\Users\USERNAME\Documents\MobaXterm\home -- or whatever drive that u installed windows
i just installed the python plugin and it works fine
In Mobaxterm simply type : apt-get install subversion
Usable just right after installation. No need to restart.
Same for git.
Change the name of the .mxt3 file (that you downloaded) to .zip
Extract the files, get the .exe files you want from the bin folder
from the files you just extracted, and add them to the slash/bin
folder of the Mobaxterm (where there are more .exe files)
Restart
In order to finish your plugin installation, you need to restart MobaXterm. After restarting, type "svn" in the terminal and it should work.
Try run the command:
#unalias svn
When I saw $PATH and looked into its directories, there was no git.exe.
I downloaded git.mxt3 and put in program files (86) folder and restarted mobaterm.
After restart I can see a file named git.exe in my /bin folder. I am using Win7 (64 bit) and mobaXterm personal Edition v7.1 installed using windows installer (not portable )
MobaXterm already has a 'Packages' button where you can search for plugins and download them. You don't need to go to github and other places to find the necessary files. Just using the built-in search feature under the 'Packages' option at the top of MobaXterm.
I am trying to do it, but all I can get is some source code that I don't know how to do deal with I downloaded from http://pkgconfig.freedesktop.org/releases/.
This is a step-by-step procedure to get pkg-config working on Windows, based on my experience, using the info from Oliver Zendel's comment.
I assume here that MinGW was installed to C:\MinGW. There were multiple versions of the packages available, and in each case I just downloaded the latest version.
go to http://ftp.gnome.org/pub/gnome/binaries/win32/dependencies/
download the file pkg-config_0.26-1_win32.zip
extract the file bin/pkg-config.exe to C:\MinGW\bin
download the file gettext-runtime_0.18.1.1-2_win32.zip
extract the file bin/intl.dll to C:\MinGW\bin
go to http://ftp.gnome.org/pub/gnome/binaries/win32/glib/2.28
download the file glib_2.28.8-1_win32.zip
extract the file bin/libglib-2.0-0.dll to C:\MinGW\bin
Now CMake will be able to use pkg-config if it is configured to use MinGW.
Get the precompiled binaries from http://ftp.gnome.org/pub/gnome/binaries/win32/dependencies/
Download pkg-config and its depend libraries :
pkg-config_0.26-1_win32.zip
glib_2.28.8-1_win32.zip
gettext-runtime_0.18.1.1-2_win32.zip
A alternative without glib dependency is pkg-config-lite.
Extract pkg-config.exe from the archive and put it in your path.
Nowdays this package is available using chocolatey, then it could be installed with
choco install pkgconfiglite
I did this by installing Cygwin64 from this link https://www.cygwin.com/
Then - View Full, Search gcc and scroll down to find pkg-config.
Click on icon to select latest version.
This worked for me well.
I would like to extend the answer of #dzintars about the Cygwin version of pkg-config in that focus how should one use it properly with CMake, because I see various comments about CMake in this topic.
I have experienced many troubles with CMake + Cygwin's pkg-config and I want to share my experience how to avoid them.
1. The symlink C:/Cygwin64/bin/pkg-config -> pkgconf.exe does not work in Windows console.
It is not a native Windows .lnk symlink and it won't be callable in Windows console cmd.exe even if you add ".;" to your %PATHEXT% (see https://www.mail-archive.com/cygwin#cygwin.com/msg104088.html).
It won't work from CMake, because CMake calls pkg-config with the method execute_process() (FindPkgConfig.cmake) which opens a new cmd.exe.
Solution: Add -DPKG_CONFIG_EXECUTABLE=C:/Cygwin64/bin/pkgconf.exe to the CMake command line (or set it in CMakeLists.txt).
2. Cygwin's pkg-config recognizes only Cygwin paths in PKG_CONFIG_PATH (no Windows paths).
For example, on my system the .pc files are located in C:\Cygwin64\usr\x86_64-w64-mingw32\sys-root\mingw\lib\pkgconfig. The following three paths are valid, but only path C works in PKG_CONFIG_PATH:
A) c:/Cygwin64/usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig -
does not work.
B) /c/cygdrive/usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig -
does not work.
C) /usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig - works.
Solution: add .pc files location always as a Cygwin path into PKG_CONFIG_PATH.
3) CMake converts forward slashes to backslashes in PKG_CONFIG_PATH on Cygwin.
It happens due to the bug https://gitlab.kitware.com/cmake/cmake/-/issues/21629. It prevents using the workaround described in [2].
Solution: manually update the function _pkg_set_path_internal() in the file C:/Program Files/CMake/share/cmake-3.x/Modules/FindPkgConfig.cmake. Comment/remove the line:
file(TO_NATIVE_PATH "${_pkgconfig_path}" _pkgconfig_path)
4) CMAKE_PREFIX_PATH, CMAKE_FRAMEWORK_PATH, CMAKE_APPBUNDLE_PATH have no effect on pkg-config in Cygwin.
Reason: the bug https://gitlab.kitware.com/cmake/cmake/-/issues/21775.
Solution: Use only PKG_CONFIG_PATH as an environment variable if you run CMake builds on Cygwin. Forget about CMAKE_PREFIX_PATH, CMAKE_FRAMEWORK_PATH, CMAKE_APPBUNDLE_PATH.
Install mingw64 from https://sourceforge.net/projects/mingw-w64/. Avoid program files/(x86) folder for installation. Ex. c:/mingw-w64
Download pkg-config__win64.zip from here
Extract above zip file and copy paste all the files from pkg-config/bin folder to mingw-w64. In my case its 'C:\mingw-w64\i686-8.1.0-posix-dwarf-rt_v6-rev0\mingw32\bin'
Now set path = C:\mingw-w64\i686-8.1.0-posix-dwarf-rt_v6-rev0\mingw32\bin
taddaaa you are done.
If you find any security issue then follow steps as well
Search for windows defender security center in system
Navigate to apps & browser control> Exploit protection settings> Program setting> Click on '+add program customize'
Select add program by name
Enter program name: pkgconf.exe
OK
Now check all the settings and set it all the settings to off and apply.
Thats DONE!
Another place where you can get more updated binaries can be found at Fedora Build System site. Direct link to mingw-pkg-config package is: http://koji.fedoraproject.org/koji/buildinfo?buildID=354619
for w64-based computers you have to install mingw64. If pkg-config.exe is missing then, you can refer to http://ftp.acc.umu.se/pub/gnome/binaries/win64/dependencies/
Unzip and copy/merge pkg-config.exe into your C:\mingw-w64 installation, eg. into on my pc into C:\mingw-w64\x86_64-8.1.0-posix-seh-rt_v6-rev0\mingw64\bin
In 2022 VS Code works with CMake & pkgconfig out of the box (add pkgconf && vcpkg-pkgconfig-get-modules to your vcpkg.json)
From: https://github.com/JoinMarket-Org/joinmarket/wiki/Installing-JoinMarket-on-Windows
This guide describes how to install JoinMarket and its dependencies (python, libsodium, secp256k1) on Windows.
Some or all of this may or may not work for all versions of Windows. Reports appreciated. It is not claimed to be in any way comprehensive. Verification of downloads are your own responsibility.
Install JoinMarket - go to https://github.com/JoinMarket-Org/joinmarket/releases and download the most recent release. Unzip it into any location you choose.
You will need to install MinGW from here or go to their website. After a few introductory screens, you will be shown a windows with some optional components that you have to choose; this basic setup is sufficient:
From "Basic Setup" in the left menu:
mingw-developer-toolkit
mingw32-base
mingw32-gcc-g++
msys-base
Once you have chosen these, choose "Update" from the main menu first item. These components will be installed into C:\MinGW\bin. Once that is complete, you should have this dll: libgcc_s_dw2-1.dll in that folder C:\MinGW\bin, along with a lot of other files; I'm mentioning this file explicitly, since it's needed specifically for libsecp256k1 to operate in this setup.
Next, you must make sure C:\MinGW\bin is added to your PATH variable. Here's one guide to how to do that; you must append ;C:\MinGW\bin to the end of the path before continuing.
Install Python from https://www.python.org/ftp/python/2.7.11/python-2.7.11.msi. Run the executable. Choose to install the feature Add python.exe to Path (it's the last option in the installer, off by default - switch it on) on local hard drive during installation; Python should then be installed in C:\Python27 (EXTRA NOTE: the most recent 2.7 installation linked here seems to install pip automatically, which is very useful for step 4)
Check that Python runs. Open a new command prompt as administrator by typing cmd.exe into the Start menu and pressing Ctrl+Shift+Enter. Type python and you should see something like:
Python 2.7.11 (default....
....
>>>
Exit the Python console with exit() or by pressing Ctrl+C. Now, make sure your version of pip is up to date: run the command: python -m pip install --upgrade pip.
Go to the directory C:\Python27\Lib\distutils and add a new file, called distutils.cfg. Inside it, put:
[build]
compiler=mingw32
Close and save the file.
Next, you need to install the dll for libnacl. First go to https://download.libsodium.org/libsodium/releases/ and choose the file libsodium-1.0.4-msvc.zip to download. Unzip anywhere, and then copy the file libsodium.dll from the directory \Win32\Release\v120\dynamic (do not use v140), and paste it into root joinmarket directory (the same directory where README.md lives). Then you need to address the Visual C++ 2013 runtime dependency. Do so by going to www.microsoft.com/en-us/download/details.aspx?id=40784 and clicking Download. Choose x86 even on a 64-bit system, and run the executable.
Note that after doing this, you must run pip install -r requirements-windows.txt from the Joinmarket root directory (where the README.md file is) and should not get an error message (this will install/check the python packages libnacl and secp256k1(-transient)).
I downloaded file:
http://downloads.sourceforge.net/gladewin32/glade-3.4.3-win32-1.zip
and when I extract it an run glade-3.exe from /bin folder, I get "no libxml2.dll" error.
Now, I want to find installer (like GTK+ bundle for GTK+) that would install glade3 and all it's dependencies for Windows XP.
Well glade3 worked for me after I downloaded:
iconv.dll
libxml2.dll
and put it in path
This is not the answer, but it can help run it.
Another thing. I previously installed GTK+ bundle, so if you didn't do that, you may need more dll's etc...
Just for the record, the newer version available at http://downloads.sourceforge.net/gladewin32/ is an installer that already includes libxml.