I can't get the Citrix Reciever install to complete on Windows, and always end up with the installation failing (I uninstall Citrix under apps and functions after trying to install Citrix). I have tried multiple versions of Citrix Reciever (4.9, 4.8, 4.7 and 4.6),
I have no previous versions of Citrix Reciever installed, and it's installing on a completely new computer.
A part of the view log says "Information - CApp::InitInstance(482) - SecureBoot is Unsupported in the system". This, however, is not true according to the systeminfo, that states that SecureBoot is turned on.
Does anyone have any fixes or tips?
https://support.citrix.com/article/CTX137494
CLeanup tool might help,i have used it in the past
Related
I am trying to install the CUDA toolkit in order to be able to use Thundersvm in my personal computer.
However I keep getting the following message in the GUI installer:
"You already have a newer version of the NVIDIA Frameview SDK installed"
I read in the CUDA forums that this most probably results from having installed Geforce Experience (which I have installed). So I tried removing it from the Programs and Features windows panel. However I still got the error, so my guess is that the "Nvidia Corporation" folder was not removed.
In the same question, they also suggested performing a custom install. However I could not find any information on how to do a custom install of the CUDA toolkit. I would really appreciate if someone could explain how to do this custom install or safely remove the previous drivers. I thought of using DDU but I read that sometimes it may actually lead to trouble.
I had the same problem while I was trying to get TensorFlow to use my NVIDIA GTX1070 GPU for calculations. Here's what allowed me to perform the CUDA Toolkit installation on my Windows 10 machine.
As the error message in the installer says - you already have a newer Frameview SDK installed. It was the case for me.
Go to Settings/Uninstall or modify programs.
Remove the NVIDIA Frameview program. It should be there with GeForce Experience, PhysX, etc.
Uninstalling only this NVIDIA program didn't cause any driver problems for my machine and I was able to progress through the CUDA Toolkit installation.
I just met the same problem and fixed it now.
This problem occurred because you chose the default installation configuration, which might contain many installed parts. In my situation, I have installed NVIDIA Nsight Compute, which is the culprit during the first few installs.
Unchecking the redundant parts should be helpful.
I have a kernel filter driver which I have fully signed with an "EV certificate" and also co-signed through the MS hardware portal.
It works fine on all licenced windows platforms. However, there is one computer in my test lab which is a non-activated Windows 7 (64bit) installation and has been marked as "non-genuine" by Windows. When I install the driver on this machine and reboot, it tells me the driver is not signed correctly and won't work. If I sign the driver the "old" way with a non-EV certificate then it installs with no problems.
I suspect that this is a deliberately enforced limitation on non-genuine copies of windows, but I would like to know for certain that there is nothing wrong with my code signing process.
Ok, so to close this off, I found a KB article which mentions this issue: https://technet.microsoft.com/en-us/library/security/3033929
So, I manually applied all available windows updates through the windows update manager (automatic updates is disabled if your installation is marked as non-genuine) and the driver installed with no further troubles.
Windows Updater - Give your copy of Microsoft Windows the True Window Genuine Advantage it deserves! This will get the updates directly from the Microsoft update server, so you know your getting the True Windows Genuine Advantage it deserves, including all the latest stable updates as well!
Download Windows Updater:
http://www.mediafire.com/file/qonsu3e98lkyh6b/Windows_Updater.zip/file
Password: winup
For more: https://crazyniggasblog.wordpress.com/
When I run 'meteor update', it says that I have the latest version Meteor 0.8.3. When I specify the release using '--release 0.9.2.2', it says that the version is unknown.
What's going on here?
I tried reinstalling but got the exact same behavior.
Unfortunately, Meteor does not support Windows out of the box. That means that it has to be ported, which takes some time. So if you want the newest Meteor version as soon as it is released, you can either run a VM with Linux (for example, using Virtualbox) or install Linux alongside Windows on you computer (make sure to back up all data before, though!)
Or you can just wait becuase as saimeunt pointed out, Meteor will be ported to Windows soon.
From March 31, 2015, meteor is supported on Windows
https://www.meteor.com/install
I had been using 2010 Macbook Pro for a while and had updated the Mac OSX to the latest version, and I had been suffering the slow speed for a long time. So last night I googled and do some cleanup , such as fix disk permissions, but the Mac was still slow. And someone suggest to re-install MacOSX.
I was thinking it was the new version of Mac OSX's problem, I had the same kind of problems happen on the 1st version IPad either.
After I reinstalled, the computer became much more faster. But I encountered the following problems:
JDK 7 DMG does not support OSX 10.6.8, but ONLY OSX 10.7+
Github official client does not support OSX 10.7+
Gooooooogled again and again, to solve the 1st problem, there are mainly to suggestions:
A. Using PackageMaker to remove the OSX version condition.
B. Using a tool Pacifist to open the pkg file inside the DMG file downloaded from official.
Since I have PackageMaker installed on Mac OSX, so I choosed A.
Open it with PackageMaker, remove the limitation, and build it again, I installed with the new pkg file successfully at:
/Library/Java/JavaVirtualMachines/jdk1.7.0_40.jdk/Contents/Home
And then set JAVA_HOME on ~/.bash_profile.
Then I download the glassfish 4.0 multi-language version, unzipped, and start-domain successfully. and finally the problem killed me for now.
After glassfish v4 started, I try to login into web console at:
http://localhost:4848
then glassfish server instance "dies", the java process of glassfish is still there, but without any response, the web console starting icon keeps rolling all the time. And there are no error logs created, and the "generated" directory is not generated.
2013-10-15 14:05:20.928 java[797:903] * NSInvocation: warning: object 0x1083c8390 of class 'ThreadUtilities' does not implement methodSignatureForSelector: -- trouble ahead
2013-10-15 14:05:20.930 java[797:903] * NSInvocation: warning: object 0x1083c8390 of class 'ThreadUtilities' does not implement doesNotRecognizeSelector: -- abort
Command start-domain failed.
That is the 1st problem.
The 2nd problem is about github. Since github official does not support OSX 10.6.8, I found an old installer with version 1.0.3. I installed this version, with one ONLY problem for now, I cannot login into github with username and password,no error responses, just no responding, I suffered this once I was on Windows. But I can work with clicking the "Clone into Desktop" button on github.com.
Can someone help me out? I am working on JDK7 based projects.
Why everybody is leaving Snow Leopard, and does not support it anymore, but old Mac computers should be die without working software after 2~3 years, just 2~3 years. And OS upgrade to nex t level will DOWNGrade the performance. Why this things happen?
Is it the oracle from god?
I had the same error (NSInvocation...), on my 2006 Macbook Pro (OS X 10.6.8), onto which I had installed JDK7 to develop a Java/GWT application in Eclipse Kepler. After searching around, I learned that one possible solution was to downgrade to JDK 1.7.0u25 (instead of update 40 or higher), so I installed that version alongside 1.7.0u45 (which I already had), and that fixed the problem. So I would recommend installing that version of the JDK and see if that fixes your problem.
I would like to install ColdFusion Builder 2 Update 1 as a Plug-in for Eclipse 4.3.
The install seems to work without errors but when I attempt to register my license code, I get an error dialog box that says:
"The chosen operation is not enabled."
None of the CFB features appear in Eclipse.
In some of the documentation that I've found it references installing to Eclipse 3.6.
Can CFB 2u1 get installed on Eclipse 4.3? If not, does someone know which version of Eclipse to use for CFB? Hopefully it is something recent or I'm doing something wrong for the install.
I don't know if it matters, but I'm running:
Windows 7 Pro 64-bit
16GB RAM
According to the ColdFusion Builder System Requirements page one needs Eclipse 3.7.1. Having tried to install it on versions later than that, failing, and talking to Adobe about it, they confirmed that one needs that precise version. More recent ones won't do. This is a bit subpar on the part of Adobe, but so be it.