I would like to install ColdFusion Builder 2 Update 1 as a Plug-in for Eclipse 4.3.
The install seems to work without errors but when I attempt to register my license code, I get an error dialog box that says:
"The chosen operation is not enabled."
None of the CFB features appear in Eclipse.
In some of the documentation that I've found it references installing to Eclipse 3.6.
Can CFB 2u1 get installed on Eclipse 4.3? If not, does someone know which version of Eclipse to use for CFB? Hopefully it is something recent or I'm doing something wrong for the install.
I don't know if it matters, but I'm running:
Windows 7 Pro 64-bit
16GB RAM
According to the ColdFusion Builder System Requirements page one needs Eclipse 3.7.1. Having tried to install it on versions later than that, failing, and talking to Adobe about it, they confirmed that one needs that precise version. More recent ones won't do. This is a bit subpar on the part of Adobe, but so be it.
Related
I am having difficulty installing various Julia packages on my Windows 7 laptop. When trying to add certain packages I receive the following error:
(v1.3) pkg> add MbedTLS
Updating registry at `C:\Users\uname\.julia\registries\General`
Updating git-repo `https://github.com/JuliaRegistries/General.git`
Resolving package versions...
ERROR: Unable to automatically install 'MbedTLS' from 'C:\Users\uname\.julia\packages\MbedTLS_jll\wUtL4\Artifacts.toml'
Several packages install happily, and I think I've narrowed it down to those that are supplied via BinaryBuilder.jl, such as MbedTLS, Arpack, OpenSpecFun. If I try to install any packages that have any such packages as a dependency I get the same error message when it hits one of these (initially encountered when I was trying to install Genie.
I am using the latest Julia (1.3.1), although I encountered the same issue previously in 1.2 - I managed to fix things eventually in that case, and tried a similar approach (manually downloading and placing in packages folder) but have not been able to fix things in this instance (although I confess that my notes were a little lacking so can't be certain I'm doing the correct thing). The various packages seem to exist in ...\.julia\packages\ (although not in .julia\compiled), but julia complains whenever I try to add them to some environment.
I don't think I understand julia's package system well enough to see quite what is going on here. I have seen other people with similar issues but not found anything yet which has worked - any help would be much appreciated!
This usually is due to an issue with your powershell installation, which is what we use to download these binaries in Julia 1.3 and 1.4. In particular, most of the internet (including GitHub, where most of our binaries are hosted) disabled SSL v3, TLS 1.0, and TLS 1.1 in 2018. Windows 7 is old enough that it doesn't speak TLS 1.2+ natively; instead you must install two packages:
This TLS easy_fix
Windows Management Framework 3.0 or later, to get Powershell v3+
This is necessary on Windows 7, but not on Windows 10. For more instructions, you can read the Julia platform specific instructions: https://julialang.org/downloads/platform/
I've a new computer with Debian 9 / 64bits.
After installing Netbeans 8.2 and Codename Plugin 5.0 if i try to open "CodenameOne Settings" or "CodenameOne Designer" nothing happens.
I've checked JRE_JAVA and JDK_JAVA and PATH environment variables and them points to the correct path.
I don't see any error message but the tools dont start.
I dont know what happens but i remember a similar issue in the old computer with Debian 6 / 32bits.
Can anybody help me?
Thanks a lot
Ramon Garcia
The default version of Java on Linux systems is OpenJDK which is a bit problematic due to its lack of JavaFX support. With newer JDKs we updated Codename One to download JavaFX dynamically as it was removed from the JDK but since the dynamic download only works with JDK 10 or newer (due to the way the people at Oracle compiled JavaFX) this would be the minimum version of OpenJDK.
So you can either install Oracle JDK 8 or Open JDK 11 to keep compatibility.
Notice you can track this issue by running the designer/gui builder from the command line and seeing the point of failure: https://www.codenameone.com/blog/tip-track-designer-guibuilder-issues.html
I have Mac OS X 10.9 and Java SE Runtime Environment (build 1.7.0_17-b02)... I had another version of JEdit (I guess JEdit 4) and Java 6 before and my JEdit was working fine.
Then I upgraded Java to Java 7 because NetBeans7.4 needed to be installed with Java 7 (and I needed this new NetBeans because I had a fatal issue with NetBeans 7.3.1). So anyway, I installed Java 7 and I installed NetBeans 7.4 and my netbeans is working perfectly now, but when I tried to run the JEdit it brought up an alert saying it needs Java SE 6 to run!
I did some search in the net, and it seems that JEdit 4.5 (and I guess JEdit 5.1 too!) should not have any issue with Java 7, So I installed JEdit 5.1.0... I expected that it should work and don't bring up that complain alert BUT it didn't work and brought up "Java SE 6 is needed" complain again ...
I still can run JEdit using this command, but I can't use Cmd+C & Cmd+V shortcuts for copy and paste and it kills me!
java -jar /Applications/jEdit.app/Contents/Resources/Java/jedit.jar
Is there anybody who knows why JEdit 5.1 is complaining about Java 6 and how to fix it?! I really appreciate your help!
https://sourceforge.net/tracker/?func=detail&aid=3615181&group_id=588&atid=100588
After almost 3 months struggling with jEdit I'm ready to give up... I still can't run jEdit like a normal app. What do you suggest to replace my jEdit?! The main feature I need is realtime access to the server files... Most of editors keep a local version of files, so they don't show the changes when they are made in the server side. for example when I switch to a new git branch on server, my netbeans is still showing the branch that I was working before switching, so I need to do a complete download on the project. Any idea?!
#Monica About one year later after your question, I've experienced the same issue with Mountain Lion (according to jEdit's homepage, 5.1.0 is still the current stable version).
I've installed jEdit in /Applications/Dev/ (not /Applications as most people do, I believe; that's not important except for designating the path, see below). I'm using Java 7.
The following works for me from the command line, like for you:
java -jar /Applications/Dev/jEdit.app/Contents/Resources/Java/jedit.jar
So, I used Automator to create a normal MacOS Application named "MyJEdit.app" as in the screenshot. Now I can launch MyJEdit instead of jEdit. Other java flags might be required, for instance to set the memory usage (cf java -help and java -X).
jEdit on Mac OS X and Java 7 is a long story of annoyances, and fine points that Apple did not get quite right up to Java 6, and Oracle still learning about native platform support in the past 1-2 years.
Starting with Jdk-7u40 it works technically quite well, even Retina displays, but jEdit needs to be adapted slightly.
jEdit 5.2 will probably work with Java 7 out of the box, but a few points are still open. See also the tracker item 3615000 at Sourceforge.
Here is a practical proof that it works: Isabelle/jEdit -- it is an application based on jEdit that is bundled differently than official jEdit 5.1.0.
I had been using 2010 Macbook Pro for a while and had updated the Mac OSX to the latest version, and I had been suffering the slow speed for a long time. So last night I googled and do some cleanup , such as fix disk permissions, but the Mac was still slow. And someone suggest to re-install MacOSX.
I was thinking it was the new version of Mac OSX's problem, I had the same kind of problems happen on the 1st version IPad either.
After I reinstalled, the computer became much more faster. But I encountered the following problems:
JDK 7 DMG does not support OSX 10.6.8, but ONLY OSX 10.7+
Github official client does not support OSX 10.7+
Gooooooogled again and again, to solve the 1st problem, there are mainly to suggestions:
A. Using PackageMaker to remove the OSX version condition.
B. Using a tool Pacifist to open the pkg file inside the DMG file downloaded from official.
Since I have PackageMaker installed on Mac OSX, so I choosed A.
Open it with PackageMaker, remove the limitation, and build it again, I installed with the new pkg file successfully at:
/Library/Java/JavaVirtualMachines/jdk1.7.0_40.jdk/Contents/Home
And then set JAVA_HOME on ~/.bash_profile.
Then I download the glassfish 4.0 multi-language version, unzipped, and start-domain successfully. and finally the problem killed me for now.
After glassfish v4 started, I try to login into web console at:
http://localhost:4848
then glassfish server instance "dies", the java process of glassfish is still there, but without any response, the web console starting icon keeps rolling all the time. And there are no error logs created, and the "generated" directory is not generated.
2013-10-15 14:05:20.928 java[797:903] * NSInvocation: warning: object 0x1083c8390 of class 'ThreadUtilities' does not implement methodSignatureForSelector: -- trouble ahead
2013-10-15 14:05:20.930 java[797:903] * NSInvocation: warning: object 0x1083c8390 of class 'ThreadUtilities' does not implement doesNotRecognizeSelector: -- abort
Command start-domain failed.
That is the 1st problem.
The 2nd problem is about github. Since github official does not support OSX 10.6.8, I found an old installer with version 1.0.3. I installed this version, with one ONLY problem for now, I cannot login into github with username and password,no error responses, just no responding, I suffered this once I was on Windows. But I can work with clicking the "Clone into Desktop" button on github.com.
Can someone help me out? I am working on JDK7 based projects.
Why everybody is leaving Snow Leopard, and does not support it anymore, but old Mac computers should be die without working software after 2~3 years, just 2~3 years. And OS upgrade to nex t level will DOWNGrade the performance. Why this things happen?
Is it the oracle from god?
I had the same error (NSInvocation...), on my 2006 Macbook Pro (OS X 10.6.8), onto which I had installed JDK7 to develop a Java/GWT application in Eclipse Kepler. After searching around, I learned that one possible solution was to downgrade to JDK 1.7.0u25 (instead of update 40 or higher), so I installed that version alongside 1.7.0u45 (which I already had), and that fixed the problem. So I would recommend installing that version of the JDK and see if that fixes your problem.
I have been using RapidSVN on a Linux machine for the past few years - it has become an excellent tool for managing my source.
Yesterday my trusty Linux laptop had a couple of strokes so I decided it was time to replace it. Today I went out and purchased a new Mac Book Pro with the flashy display and solid state drives.
Then I went hunting for an SVN tool to run on Mac. I found that RapidSVN will run on a Mac as it was developed using wxWidgets (cross platform windowing).
So, I needed to install wxWidgets, however this doesn't come as an executable so I had to download the tar ball. To compile I realised I don't have a compiler installed yet... so, install Xcode 4.4, then learn that doesn't install a compiler either... find the Xcode preference to install the command line tools (compiler).
So, now I have Xcode installed, a gcc compiler, and tracking back up it comes to wxWidgets. It takes a little working out but I manage to extract the files into a directory in my home folder, (following instructions of course), and from the 'build' folder I run the ../configure command (which seems to work) and then the 'make' command which fails:
In file included from ../include/wx/mac/private.h:4,
from ../src/common/dynlib.cpp:48:
../include/wx/mac/carbon/private.h:1459: error: ‘Cursor’ does not name a type
../include/wx/mac/carbon/private.h:1488: error: ‘ClassicCursor’ does not name a type
make: *** [baselib_dynlib.o] Error 1
So I go hunting for a solution only to find this bug: http://trac.wxwidgets.org/ticket/14536 which unfortunately indicates this is not going to be fixed.
Changed 10 months ago by csomor
* status changed from new to closed
* resolution set to wontfix
A dismal day in the land of computers. I am now stuck for the next 5-6 years on a computer that will never be able to compile anything using wxWidgets - I rather feel like taking it back to Apple and getting my money back.
So where to from here? Is there a binary version of wxWidgets available? Is there a binary version of RapidSVN available? Should I downgrade to OSX 10.x something less than I am currently on? Should I upgrade to unstable wxWidgets?
This is an interesting but not very understandable read. What exactly are you trying to achieve? If you're looking to use the best available version of wxWidgets under OS X, get 2.9.4 or the current svn version and build it using the Xcode version you have already with Cocoa support. If you absolutely need to continue to use Carbon (why?), either install Xcode 3, available from Apple, or get 10.6 (or 10.5) SDK in some other way and pass it as the SDK to use to configure using --with-macosx-sdk option as explained in the documentation.
VZ is right. If you need to use wxWidgets 2.8 on OS X (and there are legitimate reasons for needing to do so), get the 10.6 SDK. Copy it alongside the already installed 10.7 and/or 10.8 , and select it in the project/target's build settings.
From here I have given up trying to compile anything on my current OSX. I am not going to downgrade or install multiple versions of different libraries in order to satisfy the lack of support for the latest current stable versions.
From here I will download and install binaries only.
I have Mac OSX Lion and just did this:
brew install wxmac
and was able to get through the install with no issues.