I am trying to install omni compiler in order to compile XcalableMP programs on OSX. I can ./configure successfully as per the instructions but am receiving this error when I make:
../include/xmp_internal.h:19:10: fatal error: mpi.h: No such file or directory
My Open MPI is installed via homebrew and mpi.h is located through my Cellar folder. How do I go about including this header file?
can you try the following command to be sure the location of the installed openmpi is correct:
mpicc -showme
Then, are you sure the mpi path is in your path, try to set these environment variables and then try:
Note that I assume the openmpi is installed in "/home/openmpi" path for example:
export PATH=/home/opempi/bin:/home/opempi/include:$PATH
and for the runtime:
export LD_LIBRARY_PATH=/home/openmpi/lib:$LD_LIBRARY_PATH
Then try to configure and make again the omnicomppiler,
Related
Executing Command:
MSVS201364bit.cmd && python make_aptx_dec.py --x86-64.win.clhd.bin
CMake Error: Could not find CMAKE_ROOT !!!
CMake has most likely not been installed correctly.
Modules directory not found in
Installed latest version 3.6.2 cmake still facing this issue.
Are you sure that you are executing cmake by its final full path name and not symbolic link? Currently cmake won't work properly if you execute it through a symbolic link
I'm trying to compile miniSAT on Kali Linux 64 bits but I keep getting the error message:
fatal error: zlib.h: no such file or directory
I have read that there might be a linking problem that makes the compiler unable to find the header files, but I'm new to Linux and do not know how to solve that.
You should install the development support files for zlib, try:
sudo apt-get install libz-dev
Other package names: zlib1g-dev.
If you've already zlib library, make sure you're compiling your code sources with -lz. See: missing zlib.h in ubuntu.
Install zlib from it's source, solve my similar error.
Download last version from this then:
configure
make -j4
make install
Trying to compile Mapnik on OSX 10.8
So after I clone the Github repo, I go to run the configure command like so:
./configure and then get the error:
Checking for C++ library icuuc... no
Could not find required header or shared library for icuuc
and later:
Exiting... the following required dependencies were not found:
- icuuc (ICU C++ library | configure with ICU_LIBS & ICU_INCLUDES or use ICU_LIB_NAME to specify custom lib name | more info: http://site.icu-project.org/)
Looking at the Mapnik troubleshooting area for a solution: https://github.com/mapnik/mapnik/wiki/InstallationTroubleshooting
Says: Solution: If g++ is available then ICU must be in a custom location so set the paths to the libs and includes - ie. ICU_LIBS=/usr/local/lib and ICU_INCLUDES=/usr/local/include.
By running g++ from command line I get: i686-apple-darwin11-llvm-g++-4.2: no input files
So this means that g++ is available, but I have no idea how to go about setting the paths so that configure can find them.
ICU Libraries were installed by default or with homebrew, not sure which.
terminal: brew install icu4c
Warning: icu4c-51.1 already installed
Finding the icu4c install directory:
terminal: mdfind icu4c
/usr/local/Cellar/icu4c
You can add the path of your ICU_LIB/INCLUDE to your configure command:
./configure ICU_INCLUDES=/usr/local/Cellar/icu4c/include ICU_LIBS=/usr/local/Cellar/icu4c/lib
And for more help about configure on what options are accepted do:
./configure --help
For the installation reference, you can check this:
https://github.com/mapnik/mapnik/blob/v2.2.0/INSTALL.md
As per our discussion and my last comment something like the following might work.
export ICU_LIBS=/usr/local/Cellar/icu4c/lib
export ICU_INCLUDES=/usr/local/Cellar/icu4c/include
./configure
If you find same errors:
Checking for C++ library XXX... no
Follow the command
sudo apt-get install g++ libXXX-dev
Using tips (TAB button), you can see what XXX libraries you have available
sudo apt-get install libXXX(press double TAB)
I work off my i: drive
I've downloaded the following mono source file mono-2.11.2.tar.bz2
I've installed the windows version of mono v2.11.2 to "I:\Mono-2.11.2"
I installed cygwin as per the following instructions found on the following webpage http://shana.worldofcoding.com/en/mono_cygwin_tutorial.html
I replaced the "make.exe" with the one from the mono website as per instruction. I had to get one more file "cygintl-2.dll" which resides in cygwin package libintl2/libintl2-0.12.1-3
I added the following my .bashrc file. I had to change "c/Mono-2.11.2/bin" to "i/Mono-2.11.2/bin"
PATH=.:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/i/Mono-2.11.2/bin
PKG_CONFIG_PATH=.:/lib/pkgconfig:/cygdrive/i/Mono-2.11.2/lib/pkgconfig
LD_LIBRARY_PATH=.:/usr/local/lib:/usr/lib:/lib:/cygdrive/i/Mono-2.11.2/lib
export PATH PKG_CONFIG_PATH LD_LIBRARY_PATH
I placed my mono source under the folder specified: /usr/src/mono/
So my dirs looks like:
i:
i:\cygwin\
i:\cygwin\usr\src\mono
i:\cygwin\usr\src\mono\mono
i:\cygwin\usr\src\mono\mcs etc etc
i:\Mono-2.11.2\bin etc
Now the instructions says I must change dirs to /usr/src/mono/mono and run "./autogen.sh --prefix=/usr/local" from the cygwin terminal
However that doesnt work. Running the above command from /usr/src/mono/ works fine.
Now heres the problem. The next instruction is to run "make". However this comes up with :
$ make
make: *** No targets specified and no makefile found. Stop.
I even tried running it from the /usr/src/mono/mono dir. Still no luck.
Can someone please suggest what I should do to be able to build the mono source on windows 7?
Update:
I needed to install the **gnu c++ compiler (g++)**. I just ran the cygwin setup again, searched for g++ and installed that. The autogen.sh ran to completion
The last lines of ./autogen.sh --prefix=/usr/local output should
look like bellow with Now type make to compile at the end. And it
generats Makefile in the same directory.
I think in your case ./autogen.sh failed. You can keep a log file
and check what it is complaining about.
./autogen.sh --prefix=/usr/local 2>&1 | tee autogen.log
More info: http://en.wikipedia.org/wiki/GNU_build_system
The end of the ./autogen.sh ouptut:
config.status: executing quiet-libtool commands
config.status: executing default commands
mcs source: mcs
olive source:
Engine:
GC: sgen and bundled Boehm GC with typed GC and parallel mark
TLS: __thread
SIGALTSTACK: yes
Engine: Building and using the JIT
oprofile: no
BigArrays: no
DTrace: no
LLVM Back End: no (dynamically loaded: no)
Libraries:
Moon Profile: no (boehm)
MonoDroid: no
MonoTouch: no
Mobile: no
JNI support: IKVM Native
libgdiplus: assumed to be installed
zlib: system zlib
Now type `make' to compile
I am trying to compile a Rust program on Windows, but I get this error message:
Compiling openssl-sys v0.6.4
failed to run custom build command for `openssl-sys v0.6.4`
[...]
failed to execute command: The system couldn't find the specified file. (os error 2)
Is `gcc` not installed? (see https://github.com/alexcrichton/gcc-rs#windows-notes for help)
--- stderr
thread '<main>' panicked at 'explicit panic', C:\Users\User\.cargo\registry\src\github.com-0a35038f75765ae4\gcc-0.3.12\src\lib.rs:510
Cargo compiled every other package without problem, but it can't compile the openssl package.
I searched for help with this specific error and found a github issue for hyperium. The first answer references the openssl building guide for Windows.
I don't understand exactly how I have to build openssl in Windows. I installed MinGW and added the bin path to the global PATH variable, so gcc is reachable, but this did not solve the error.
I use Rust 1.2 and Cargo 0.4.0. My project is an example for a Telegram API wrapper.
1) Download ssl
Installs Win32 OpenSSL v1.0.2d
Install it here: C:\OpenSSL-Win32，C:\OpenSSL-Win32\include,C:\OpenSSL-Win32\lib
2) Install MinGW,and add system env path ,,C:\MinGW\bin,important,MinGW's installed path contain char 'MinGW '
3) cmd run env OPENSSLLIBDIR=C:/OpenSSL-Win32/lib OPENSSLINCLUDEDIR=C:/OpenSSL-Win32/include cargo build