Trying to compile Mapnik on OSX 10.8
So after I clone the Github repo, I go to run the configure command like so:
./configure and then get the error:
Checking for C++ library icuuc... no
Could not find required header or shared library for icuuc
and later:
Exiting... the following required dependencies were not found:
- icuuc (ICU C++ library | configure with ICU_LIBS & ICU_INCLUDES or use ICU_LIB_NAME to specify custom lib name | more info: http://site.icu-project.org/)
Looking at the Mapnik troubleshooting area for a solution: https://github.com/mapnik/mapnik/wiki/InstallationTroubleshooting
Says: Solution: If g++ is available then ICU must be in a custom location so set the paths to the libs and includes - ie. ICU_LIBS=/usr/local/lib and ICU_INCLUDES=/usr/local/include.
By running g++ from command line I get: i686-apple-darwin11-llvm-g++-4.2: no input files
So this means that g++ is available, but I have no idea how to go about setting the paths so that configure can find them.
ICU Libraries were installed by default or with homebrew, not sure which.
terminal: brew install icu4c
Warning: icu4c-51.1 already installed
Finding the icu4c install directory:
terminal: mdfind icu4c
/usr/local/Cellar/icu4c
You can add the path of your ICU_LIB/INCLUDE to your configure command:
./configure ICU_INCLUDES=/usr/local/Cellar/icu4c/include ICU_LIBS=/usr/local/Cellar/icu4c/lib
And for more help about configure on what options are accepted do:
./configure --help
For the installation reference, you can check this:
https://github.com/mapnik/mapnik/blob/v2.2.0/INSTALL.md
As per our discussion and my last comment something like the following might work.
export ICU_LIBS=/usr/local/Cellar/icu4c/lib
export ICU_INCLUDES=/usr/local/Cellar/icu4c/include
./configure
If you find same errors:
Checking for C++ library XXX... no
Follow the command
sudo apt-get install g++ libXXX-dev
Using tips (TAB button), you can see what XXX libraries you have available
sudo apt-get install libXXX(press double TAB)
Related
When I try to configure GnuTLS I'm getting the error that Libnettle 3.4 was not found. I've nettle 3.4.1-1 installed and the library files are present in /usr/lib. Even when I specify the environment variable NETTLE_LIBS directly (export NETTLE_LIBS="-L/usr/lib -R/usr/lib -lnettle") it always throws out that message.
In the config.log is following more concrete message:
Package dependency requirement 'nettle >= 3.4.1' could not be satisfied.
Package 'nettle' has version '3.4', required version is '>= 3.4.1'
What I'am missing here?
gnutls requires PKG_CONFIG to include nettle.pc and hogweed.pc, which were not copied to /usr/lib/pkgconfig/ in my build of nettle3 on Linux Ubuntu 20.04 x64, so I had to configure gnutls3 as follows:
PKG_CONFIG_PATH="$NETTLE3_ROOT:$PKG_CONFIG_PATH" ./configure --with-included-libtasn1 --with-included-unistring
where NETTLE3_ROOT is the path of nettle3 sources.
when you install nettle, try to specify the install path to /usr/, otherwise it will use the default /usr/local/.
./configure --prefix=/usr/ && make && make install
gnutls will search dependent in /usr/.
This package worked for me:
sudo apt-get install nettle-dev
On my system I had to do the following:
Install the pkg-config utility, which was missing on my system
Configure the environment variable PKG_CONFIG_PATH to include the pkgconfig directory under the prefix where libnettle was installed
Configure the libnettle installation using the following configure flags: ./configure --disable-openssl --enable-shared --enable-mini-gmp (the --enable-mini-gmp flag causes libhogweed to be built)
I am using SVN against my will. The current team I work with uses it for version control and they are not always available to help me. I am just trying to go from SVN Version 1.8.13 to the latest 1.9.4
I have download it and I have ran this command too
curl -o subversion-latest.tar.gz http://apache.mirrors.tds.net/subversion/subversion-1.9.4.tar.gz
tar -xvf subversion-latest.tar.gz
I have combined these two different tutorials with no luck.
svn update version
stackover flow issue
I am STUCK at with the configure part..
mymac ~/Downloads/subversion-1.9.4/serf
$ ./configure
-bash: ./configure: No such file or directory
mymac ~/Downloads/subversion-1.9.4/serf
UPDATE
I exited out of serf path and on
`mymac ~/Downloads/subversion-1.9.4` file path i ran the `./configure` My command line ran a bunch of "checks"
configure: Configuring Subversion 1.9.4
configure: creating config.nice checking for gcc...
gcc checking whether the C compiler works...
yes but eventually shot an error at the end...
configure: error: failed to recognize APR_INT64_T_FMT on this platform
mymac ~/Downloads/subversion-1.9.4
I have the latest version of XCode..
UPDATE2 tried neon, again
mymac ~/Downloads/subversion-1.9.4
$ sh get-deps.sh neon
Local directory 'serf' already exists; the downloaded copy won't be used
Local directory 'apr' already exists; the downloaded copy won't be used
Local directory 'apr-util' already exists; the downloaded copy won't be used
get-deps.sh: line 151: get_neon: command not found
Usage: get-deps.sh
Usage: get-deps.sh [ apr | serf | zlib | sqlite | gmock ] ...
mymac ~/Downloads/subversion-1.9.4
$ cd neon
-bash: cd: neon: No such file or directory
UPDATE 3
ran this command first ..
mymac ~/Downloads/subversion-1.9.4
$ ./configure --prefix=/usr/local --with-serf=/usr/local/serf
configure: Configuring Subversion 1.9.4
configure: creating config.nice
checking for gcc... gcc
checking whether the C compiler works... yes
I guess I should install a new version of serf?
checking was serf enabled... no
An appropriate version of serf could not be found, so libsvn_ra_serf
will not be built. If you want to build libsvn_ra_serf, please
install serf 1.3.4 or newer.
configure: error: Serf was explicitly enabled but an appropriate version was not found.
I have no clue where to go from here and how to get around it. I already figure out that neon is no longer supported and I am using serf Can someone offer a different way to go about this? Please? Thanks!
Consider using Brew or MacPorts, if possible. Then this can be as simple as:
brew install svn
If you really must install from source,
it might not be as complicated as the steps you described so far.
Try these much simpler steps exactly:
cd /tmp
curl -o subversion-latest.tar.gz http://apache.mirrors.tds.net/subversion/subversion-1.9.4.tar.gz
tar -xvf subversion-latest.tar.gz
cd subversion-1.9.4
./configure --prefix=/tmp/local
make
make install
This will (hopefully) build Subversion and install it into /tmp/local. Test with this command:
/tmp/local/bin/svn --version
If the output looks good, then repeat from the start, but use a different value for --prefix, as appropriate in your environment.
(I tried, and this worked well for me, right now, btw.)
Maybe it's not so simple. In that case please update your question with the output where you get stuck.
I am following this document for building the Go Imagick library.
When i ran the following command
go build -tags no_pkgconfig imagick
It throws the following exception :
# imagick
src/imagick/affine_matrix.go:8:29: fatal error: wand/MagickWand.h: No such file or directory
compilation terminated
Now to resolve that i have also installed the following packages as many people suggested to resolve the error. But it didn't work either.
sudo apt-get install libmagickwand-dev libmagickcore-dev imagemagick
Moreover, when i run go build imagick
It throws the following error :
# imagick
could not determine kind of name for C.FlattenAlphaChannel
could not determine kind of name for C.RemoveAlphaChannel
Output of pkg-config --cflags --libs MagickWand gives the correct output
-fopenmp -I/usr/include/ImageMagick -lMagickWand -lMagickCore
ImageMagick is installed to this path(/usr/include/ImageMagick) only.
Their docs mention that no_pkgconfig must be used with manually set GCO_CFLAGS and CGO_LDFLAGS. So something like this should work:
export CGO_CFLAGS="$(pkg-config --cflags MagickWand)"
export CGO_LDFLAGS="$(pkg-config --libs MagickWand)"
go build -tags no_pkgconfig
As mentioned on #68 of the issue tracker, you are using way too old of a version of ImageMagick, which predates the versions that were tested for the master branch. Your Linux distro is older than the current available stable release.
You should manually install a newer ImageMagick, and remove the, one from apt. Or use some solution that allows you to manage multiple versions.
I needed to install Net:SSH2 in a Cygwin environment under Windows 7 (64 bit). As usually I tried to install it with cpanm.
I already had the necessary Cygwin packages (see below) installed but the Perl build failed because it couldn't find the libssh2 library.
There is a special text file BUILDING.WIN32 in the Net::SSH2 package but this is only useful when building the module by hand and it refers mainly to MinGW. So this no help.
This is the log of the build:
Entering Net-SSH2-0.53
Checking configure dependencies from META.yml
Checking if you have ExtUtils::MakeMaker 6.59 ... Yes (7.02)
Running Makefile.PL
Configuring Net-SSH2-0.53 ... Subroutine checklibs redefined at inc/Module/Install/CheckLib.pm line 11.
Subroutine assertlibs redefined at inc/Module/Install/CheckLib.pm line 25.
Subroutine _author_side redefined at inc/Module/Install/CheckLib.pm line 39.
The libssh2 library is required by this module. If you don't have it, you can
download it from http://www.libssh2.org; you may also need OpenSSL, which can
be obtained from http://www.openssl.org , or libgcrypt, which can be obtained
from http://www.gnupg.org .
Debian: sudo aptitude install libssh2-1-dev
OpenSUSE: sudo zypper in libssh2-1 libssh2-devel
You can pass your libssh2 lib and include dirs (and extra link args) on the
command line. E.g.:
perl Makefile.PL lib=$HOME/libssh2/lib inc=$HOME/libssh2/include \
ldargs="-lz"
These can also be set through the LIBSSH2_LIB/LIBSSH2_INCLUDE/LIBSSH2_LDARGS
environment variables.
To build with libgcrypt instead of OpenSSL, pass 'gcrypt' as a parameter to
Makefile.PL, e.g.:
perl Makefile.PL gcrypt
If you want to build on Windows, see the file BUILDING.WIN32 in the
distribution.
Can't link/include C library 'ssh2', aborting.
First install the libssh2-devel package from Cygwin, e.g. with apt-cyg the command line frontend for installing packages from within a cygwin shell.
apt-cyg install libssh2-devel
Then set some environment variables to the right path for getting Net::SSH2 to work with the Cygwin packages:
LIBSSH2_LIB=/usr/lib/ LIBSSH2_INCLUDE=/usr/include/ cpanm -v Net::SSH2
That worked for me. Much easier than what the readme file linked above looked like.
checking whether cairo's PNG functions feature could be enabled... no
I have been following the setup for configuring node canvas. Cairo is needed but i am having issues trying to set it up. https://github.com/Automattic/node-canvas/wiki/Installation---OSX
If libpng fails and you get the error "error: recommended PNG functions feature could not be enabled", try installing this binary and re-running the configure step.
I followed above by installing the binaries on Mac OS 9 and run the configuration command and still no luck. I am running the install shell script in node-canvas repository:
https://github.com/Automattic/node-canvas/blob/master/install
In my /usr/local/lib I currently have:
dtrace libjpeg.8.dylib libpng.a libpng14.a
libfreetype.6.dylib libjpeg.a libpng.dylib libpng14.dylib
libfreetype.a libjpeg.dylib libpng.la libpng14.la
libfreetype.dylib libjpeg.la libpng12.0.dylib libpng15.15.dylib
libfreetype.la libpixman-1.0.dylib libpng12.0.dylib.dSYM libpng15.15.dylib.dSYM
libgif.4.1.6.dylib libpixman-1.a libpng12.a libpng15.a
libgif.4.dylib libpixman-1.dylib libpng12.dylib libpng15.dylib
libgif.a libpixman-1.la libpng12.la libpng15.la
libgif.dylib libpng.3.dylib libpng14.14.dylib node_modules
libgif.la libpng.3.dylib.dSYM libpng14.14.dylib.dSYM pkgconfig
Libpng-1.6.10 has been replaced by libpng-1.6.12.
In your install script, change
LIBPNG="http://downloads.sourceforge.net/project/libpng/libpng16/1.6.10/libpng-1.6.10.tar.gz"
to
LIBPNG="http://downloads.sourceforge.net/project/libpng/libpng16/1.6.12/libpng-1.6.12.tar.gz"
I have a set of detailed instructions for building cairo here:
https://github.com/soegaard/racket-osx-libs
There resulting libraries are here:
https://github.com/soegaard/racket-osx-libs/tree/master/lib