Executing Command:
MSVS201364bit.cmd && python make_aptx_dec.py --x86-64.win.clhd.bin
CMake Error: Could not find CMAKE_ROOT !!!
CMake has most likely not been installed correctly.
Modules directory not found in
Installed latest version 3.6.2 cmake still facing this issue.
Are you sure that you are executing cmake by its final full path name and not symbolic link? Currently cmake won't work properly if you execute it through a symbolic link
Related
I am trying to install omni compiler in order to compile XcalableMP programs on OSX. I can ./configure successfully as per the instructions but am receiving this error when I make:
../include/xmp_internal.h:19:10: fatal error: mpi.h: No such file or directory
My Open MPI is installed via homebrew and mpi.h is located through my Cellar folder. How do I go about including this header file?
can you try the following command to be sure the location of the installed openmpi is correct:
mpicc -showme
Then, are you sure the mpi path is in your path, try to set these environment variables and then try:
Note that I assume the openmpi is installed in "/home/openmpi" path for example:
export PATH=/home/opempi/bin:/home/opempi/include:$PATH
and for the runtime:
export LD_LIBRARY_PATH=/home/openmpi/lib:$LD_LIBRARY_PATH
Then try to configure and make again the omnicomppiler,
When I run cargo install cargo-binutils, I get the below error. I have gcc installed and in my path, to the point where where gcc correctly returns the location.
gcc version: gcc.exe (i686-posix-dwarf-rev0, Built by MinGW-W64 project) 8.1.0
I couldn't find a solution to work, including the explanation in the link listed in the error. I'm on Windows 10.
error: failed to run custom build command for \`backtrace-sys v0.1.37`
Caused by:
process didn't exit successfully: \`C:\Users\blahblah\AppData\Local\Temp\cargo-installEvEWRS\release\build\backtrace-sys-075604757ab74d2a\build-script-build` (exit code: 1)
--- stdout
cargo:rustc-cfg=rbt
TARGET = Some("x86_64-pc-windows-gnu")
OPT_LEVEL = Some("3")
HOST = Some("x86_64-pc-windows-gnu")
CC_x86_64-pc-windows-gnu = None
CC_x86_64_pc_windows_gnu = None
HOST_CC = None
CC = None
CFLAGS_x86_64-pc-windows-gnu = None
CFLAGS_x86_64_pc_windows_gnu = None
HOST_CFLAGS = None
CFLAGS = None
CRATE_CC_NO_DEFAULTS = None
DEBUG = Some("false")
CARGO_CFG_TARGET_FEATURE = Some("fxsr,sse,sse2")
running: "gcc.exe" "-O3" "-ffunction-sections" "-fdata-sections" "-m64" "-I" "src/libbacktrace" "-I" "C:\\Users\\BRENDA~1.BUR\\AppData\\Local\\Temp\\cargo-installEvEWRS\\release\\build\\backtra
ce-sys-1e77a4d4c3ba2eda\\out" "-fvisibility=hidden" "-DBACKTRACE_SUPPORTED=1" "-DBACKTRACE_USES_MALLOC=1" "-DBACKTRACE_SUPPORTS_THREADS=0" "-DBACKTRACE_SUPPORTS_DATA=0" "-DHAVE_DL_ITERATE_PHDR=
1" "-D_GNU_SOURCE=1" "-D_LARGE_FILES=1" "-Dbacktrace_full=__rbt_backtrace_full" "-Dbacktrace_dwarf_add=__rbt_backtrace_dwarf_add" "-Dbacktrace_initialize=__rbt_backtrace_initialize" "-Dbacktrac
e_pcinfo=__rbt_backtrace_pcinfo" "-Dbacktrace_syminfo=__rbt_backtrace_syminfo" "-Dbacktrace_get_view=__rbt_backtrace_get_view" "-Dbacktrace_release_view=__rbt_backtrace_release_view" "-Dbacktra
ce_alloc=__rbt_backtrace_alloc" "-Dbacktrace_free=__rbt_backtrace_free" "-Dbacktrace_vector_finish=__rbt_backtrace_vector_finish" "-Dbacktrace_vector_grow=__rbt_backtrace_vector_grow" "-Dbacktr
ace_vector_release=__rbt_backtrace_vector_release" "-Dbacktrace_close=__rbt_backtrace_close" "-Dbacktrace_open=__rbt_backtrace_open" "-Dbacktrace_print=__rbt_backtrace_print" "-Dbacktrace_simpl
e=__rbt_backtrace_simple" "-Dbacktrace_qsort=__rbt_backtrace_qsort" "-Dbacktrace_create_state=__rbt_backtrace_create_state" "-Dbacktrace_uncompress_zdebug=__rbt_backtrace_uncompress_zdebug" "-D
macho_get_view=__rbt_macho_get_view" "-Dmacho_symbol_type_relevant=__rbt_macho_symbol_type_relevant" "-Dmacho_get_commands=__rbt_macho_get_commands" "-Dmacho_try_dsym=__rbt_macho_try_dsym" "-Dm
acho_try_dwarf=__rbt_macho_try_dwarf" "-Dmacho_get_addr_range=__rbt_macho_get_addr_range" "-Dmacho_get_uuid=__rbt_macho_get_uuid" "-Dmacho_add=__rbt_macho_add" "-Dmacho_add_symtab=__rbt_macho_a
dd_symtab" "-Dmacho_file_to_host_u64=__rbt_macho_file_to_host_u64" "-Dmacho_file_to_host_u32=__rbt_macho_file_to_host_u32" "-Dmacho_file_to_host_u16=__rbt_macho_file_to_host_u16" "-o" "C:\\User
s\\BRENDA~1.BUR\\AppData\\Local\\Temp\\cargo-installEvEWRS\\release\\build\\backtrace-sys-1e77a4d4c3ba2eda\\out\\src/libbacktrace/alloc.o" "-c" "src/libbacktrace/alloc.c"
--- stderr
error occurred: Failed to find tool. Is `gcc.exe` installed? (see https://github.com/alexcrichton/cc-rs#compile-time-requirements for help)
https://github.com/alexcrichton/cc-rs#compile-time-requirements says:
Windows platforms targeting MinGW (e.g. your target triple ends in -gnu)
require cc to be available in PATH. We recommend the
MinGW-w64 distribution, which is using the
Win-builds installation system.
You may also acquire it via
MSYS2, as explained [here][msys2-help]. Make sure
to install the appropriate architecture corresponding to your installation of
rustc. GCC from older MinGW project is compatible
only with 32-bit rust compiler.
Try creating a symlink or hardlink to GCC called cc, somewhere on your path.
This happened to me as well. In my case I got:
failed to run custom build command for zstd-sys v2.0.1+zstd.1.5.2
Caused by: process didn't exit successfully:
C:\Users\asili\Documents\Programming\zero2prod\target\debug\build\zstd-sys-f37cc8bfd3eec6ac\build-script-build
(exit code: 1)
error occurred: Failed to find tool. Is gcc.exe installed? (see
https://github.com/alexcrichton/cc-rs#compile-time-requirements for
help)
I was able to solve it by following the steps on installing the Visual C++ extension from the VS Code marketplace.
This is how I did it:
Go to MSYS2.org https://www.msys2.org/ (You will also see the installation steps on the site, in case this answer gets outdated).
Download and install msys2-x86_64-20220603.exe (or whichever version is current). The installation is pretty straightforward, just take a note on the installation path as you will need to add this to the environment PATH later on.
A new program called "MSYS2" should've been installed. Open it, and you'll see a terminal window in it. You will run ALL of the commands mentioned below in this terminal. If you close it, open it again.
Run:
pacman -Syu
This will update the packages and databases.
Run (Again - This step may not be needed, but is recommended by MSYS2 in case packages need an additional updates.)
pacman -Syu
Run:
pacman -S --needed base-devel mingw-w64-x86_64-toolchain
You will now see a selection of all the packages. If you don't know which to choose, just press enter on your keyboard and you shall get all of them (that's what I ended up doing).
After that, gcc.exe will be installed the bin folder of mingw64. Therefore:
Add theC:\msys64\mingw64\bin file path to your path environment variable (or Wherever you decided to install it).
In case you need assistance on adding to the path, check out this link.
Remember to restart your CMD/Windows Terminal/Power Shell for the environment path to take place.
I am using this document as a guide
and i ran through this error
Install the project...
-- Install configuration: "RELEASE"
CMake Error at cmake_install.cmake:36 (file):
file cannot create directory: /installation/OpenCV-/share/licenses/opencv4.
Maybe need administrative privileges.
I just encountered the same problem as you. I found out that it is not a permission problem, but a path problem of OpenCV installation.
I use the following method for successfully installing OpenCV4.2.0 to my computer.
Change the path:
-D CMAKE_INSTALL_PREFIX = $cwd/installation/OpenCV-4.2.0
To
-D CMAKE_INSTALL_PREFIX = /usr/local
I'm trying to build GnuTLS-3.x on my OS X Lion and here is my configure command:
./configure --prefix=/usr/local/gnutls-3.4.9 --with-included-libtasn1 --without-p11-kit
It ends up
checking for NETTLE... no
configure: error:
***
*** Libnettle 3.4.1 was not found.
though libnettle-3.4.1 is installed under /usr/local/libnettle-3.4.1 and its pkg-config file libnettle.pc is defined under /usr/local/lib/pkgconfig (I've built nettle-4.3.1 from source successfully)
I've read the stackoverflow post GnuTLS Libnettle 3.4 was not found but it didn't help a bit. All other posts on the Internet didn't help either.
I'm stuck on this error. Any help is appreciated. Thanks.
I've found the cause of the problem. It was the incorrectly defined environment variable PKG_CONFIG. It was set just to the installation directory of the pkg-config i.e. /usr/local/pkg-config-0.28
However it looks like that it must have been set to the full path plus the pkg-config command itself, like: /usr/local/pkg-config-0.28/bin/pkg-config
PKG_CONFIG should include nettle.pc and hogweed.pc, which were not copied to /usr/lib/pkgconfig/ in my build of nettle3 on Linux Ubuntu 20.04 x64, so I had to configure gnutls3 as follows:
PKG_CONFIG_PATH="$NETTLE3_ROOT:$PKG_CONFIG_PATH" ./configure --with-included-libtasn1 --with-included-unistring
where NETTLE3_ROOT is the path of nettle3 sources.
I am trying to compile a Rust program on Windows, but I get this error message:
Compiling openssl-sys v0.6.4
failed to run custom build command for `openssl-sys v0.6.4`
[...]
failed to execute command: The system couldn't find the specified file. (os error 2)
Is `gcc` not installed? (see https://github.com/alexcrichton/gcc-rs#windows-notes for help)
--- stderr
thread '<main>' panicked at 'explicit panic', C:\Users\User\.cargo\registry\src\github.com-0a35038f75765ae4\gcc-0.3.12\src\lib.rs:510
Cargo compiled every other package without problem, but it can't compile the openssl package.
I searched for help with this specific error and found a github issue for hyperium. The first answer references the openssl building guide for Windows.
I don't understand exactly how I have to build openssl in Windows. I installed MinGW and added the bin path to the global PATH variable, so gcc is reachable, but this did not solve the error.
I use Rust 1.2 and Cargo 0.4.0. My project is an example for a Telegram API wrapper.
1) Download ssl
Installs Win32 OpenSSL v1.0.2d
Install it here: C:\OpenSSL-Win32，C:\OpenSSL-Win32\include,C:\OpenSSL-Win32\lib
2) Install MinGW,and add system env path ,,C:\MinGW\bin,important,MinGW's installed path contain char 'MinGW '
3) cmd run env OPENSSLLIBDIR=C:/OpenSSL-Win32/lib OPENSSLINCLUDEDIR=C:/OpenSSL-Win32/include cargo build