I want to install an Apache 2 server on a Windows 10 system. The official documentation (https://httpd.apache.org/docs/2.4/platform/windows.html) states that:
"The Apache HTTP Server Project itself does not provide binary releases of software, only source code"
To have a binary of the Apache HTTP Server it has to be compiled by oneself or acquired from a distribution provided by a thrid party. These distributions usually bundle Apache with PHP and MySQL.
The question is:
What distribution is recommended to install a standalone Apache 2 server and what are the steps to do it?
I have used the Apache Lounge distribution indicated in the official Apache 2 documentation (https://httpd.apache.org/docs/2.4/platform/windows.html)
These are the steps to install Apache on Windows using Apache Lounge distribution:
Download Apache 2.4.37 Win64 (https://www.apachelounge.com/download/)
Create folder C:/Apache24
Unzip httpd-2.4.37-win64-VC15.zip in folder C:/Apache24
Option 1: To run it from the console:
Open Windows Power Shell
Execute httpd.exe
PS > C:\Apache24\bin\httpd.exe
or
PS > cd C:\Apache24\bin
PS > .\install.exe
Open http:\localhost or http:\127.0.0.1 in brwoser
The message It works! will be displayed
Option 2: To install it as a service:
Open Windows Power Shell
Open Windows Power Shell as administrator
PS > Start-Process PowerShell -Verb RunAs
Install the service
PS > cd C:\Apache24\bin
PS > .\httpd.exe -k install
Start the service
PS > .\httpd.exe -k start
or through the services administrator
PS > services.msc
Select Apache2.4 > Right-click > Start
Open http:\localhost or http:\127.0.0.1 in brwoser
The message It works! will be displayed
Easy:
Download from apache lounge https://httpd.apache.org/docs/2.4/platform/windows.html
Go into downloaded zip folder and move the Apache24 folder to C:/
Open terminal to C:/Apache24/bin and execute httpd.exe
done!
Now type "localhost" into your browser and a message "It works" should appear on screen.
I have to uninstall tomcat before reinstall it.But, I mistakenly deleted the file folder first and then uninstalled it from "control Panel", during this process I think somewhat might be got wrong. Now when I am trying to install it it is giving me the message:-
How can I overcome this?
it means that you have already installed a version of tomcat8 on your pc. But you can fix this problem by opening the cmd in administrator mode. then you start the command:
sc.exe delete tomcat8
That is because the server is not fully out of your computer, here follow these steps to remove the existing server on windows:
Navigate to Control Panel.
Open Administrative tools.
Open SERVICES.
You will find Apache tomcat version name, right click on it and open properties.
Cope the name of the server: Tomcat8/Tomcat9.
Now open and run the command prompt as an administrator:
https://www.thewindowsclub.com/how-to-run-command-prompt-as-an-administrator
Write the command: sc Delete Tomcat8/Tomcat9 and hit enter, the existing server is
removed and you are all set to install a new one.
I have been googling for the past few hours but I simply can't get my apache on wamp to start. My skype isn't running, and the test port 80 shows it isn't being used by anything. Before this happened, I was trying to add a new vhost, but now I have reverted back all of the files where I made changes. Anyway to debug why apache won't start?
Clicking on start/resume service for apache doesn't show any errors either.
Also just in case, I am running Win7 64bit
If you have an issue in the httpd.conf or any files included by it there are a couple of ways to find out what the problem is
First look at your Windows Event Viewer. Click on the Windows link in the menu on the left, and then submenu Applications.
Look for messages from Apache with the red error icon.
Secondly, open a command window, then CD into \wamp\bin\apache\apache2.x.y\bin, replace x,y with your actual version.
Now you can run this command to get Apache(httpd) to validate the httpd.conf file.
httpd.exe -t
This should give errors with line numbers related to the http.conf file.
It stops on the first error, so you will have to keep running it and fixing the error and then run it again until it gives the all OK message.
Use apaches startup debug tool from command: httpd.exe -e warn
press Win+R
type cmd and press enter
goto directory which contains your apache httpd.exe file. for example if your wamp is installed in e:\wamp type cd /d e:\wamp\bin\apache\ApacheX.X.X\bin in cmd and press enter.
type httpd.exe -e warn (or httpd.exe -e debug for more details) to see error message about problem which is prohibiting apache to start.
That is what I did and it helped me to find out what my Apache-PHP needed:
C:\Users\Admin>cd C:\wamp\bin\apache\apache2.4.9\bin
C:\wamp\bin\apache\apache2.4.9\bin>httpd -t
Syntax OK
C:\wamp\bin\apache\apache2.4.9\bin>httpd -k start
[Thu Apr 23 14:14:52.150189 2015] [mpm_winnt:error] [pid 3184:tid 112]
(OS 2)The system cannot find the file specified. : AH00436:
No installed service named "Apache2.4".
C:\wamp\bin\apache\apache2.4.9\bin>
The most simple solution:
Uninstall and reinstall WAMP (do not even try to set it up on top of existing installation - it would not help)
P.S.
If you wonder how did I get to this situation, here is the answer: I was trying to install WAMP and it throws me an error in the middle of installation saying:
httpd.exe - System Error
The program can't start because MSVCR110.dll is missing from your computer.
Try reinstalling the program to fix this problem.
OK
I got and installed Microsoft Visual C++ 2012 Redistributable from here http://www.microsoft.com/en-us/download/details.aspx?id=30679#
And it gave me the "dll" and the MYSQL started working, but not Apache.
To make Apache to work I uninstalled and reinstalled WAMP.
This solved the issue for me:
Right click on the WAMP system try icon -> Tools -> Reinstall all services
Go to C directory and then go to below mentiond path of you wamp server.
C:\wamp64\bin\apache\apache2.4.46\bin>
Then in Address bar enter "CMD" and press enter.that wil open the command prompt.
Now past below comman
httpd.exe -e warn
to see error message about problem which is prohibiting apache to start.
If you error is releated to port then
Right click on wamp server than on apache and then on httpd.confg,
Now search 80 and replace with 81 in that file and close and restart wamp
Invalid Command '80HostnameLookups' , perhaps misspelled or defined by a module not included in the server configuration
I got this error when I debug the issue (wamp server was not going online) by the procedure defined by #RiggsFolly. Just comment the line 80HostnameLookups Off by changing it to #80HostnameLookups Off.
This solution worked for me and apache starts running.Note:80HostnameLookups Off can be found on line 222 of httpd.conf file located in C:\wamp\bin\apache\apache2.4.9\conf
phpmyadmin.conf opened with apacheconf.exe and contents chained so you must do the following:
copy contents of phpsysinfo.conf [C:\wamp\alias]
paste into phpmyadmin.conf [C:\wamp\alias]
change Alias /phpsysinfo "c:/wamp/apps/phpsysinfo3.1.12/" to Alias /phpmyadmin "c:/wamp/apps/phpmyadmin4.1.14/"
change <Directory c:/wamp/apps/phpsysinfo3.1.12/ /> to <Directory c:/wamp/apps/phpmyadmin4.1.14/ />
its worked for me.
My solution was that 2 .dll files(msvcp110.dll, msvcr110.dll) were missing from the directory :
C:\wamp\bin\apache\apache2.4.9\bin
So I copied these 2 files to all these locations just in case and restarted wamp it worked
C:\wamp
C:\wamp\bin\apache\apache2.4.9\bin
C:\wamp\bin\apache\apache2.4.9
C:\wamp\bin\mysql\mysql5.6.17
C:\wamp\bin\php\php5.5.12
I hope this helps someone out.
Sometimes it is Skype or another application "Holding" on to port 80. Jusct close Skype
My solution on Windows 10 was just to stop IIS (Internet Information Services).
If Apache is installed as a Windows service, any errors will show up in the Windows System event log. To view the System event log, navigate to Windows Administrative Tools->Event Viewer and open the System log in the Windows Logs folder. Or, you can see the same errors by running httpd.exe at the command line. In my case, httpd.exe is located here: C:\Bitnami\wampstack-5.6.26-2\apache2\bin.
If there is a problem with starting Apache, most likely the problem can be fixed by editing the httpd.conf file located in the \apache2\conf folder.
As already suggested, you can check the syntax of the httpd.conf file by running httpd.exe -t at the command line.
I found that the I had to
Change SetEnv PATH "C:\Bitnami\wampstack-5.6.26-2\apache2\bin;${PATH}" in httpd.conf
to
SetEnv PATH "C:\Bitnami\wampstack-5.6.26-2\apache2\bin;%PATH%"
I had the same problem. My port 80 was not in use.
After thorough research, all I did was to download Update for Universal C Runtime.
Once installed and my PC restarted, all was OK.
I was having the same problem, the mysql service was starting but not the apache service, the main problem about that is one of your virtual hosts isn't config. correctly, all i did was deleted the virtual host that i created "D:\wamp\bin\apache\apache2.4.23\conf\extra\httpd-vhosts, restarted all services apache service started working correctly and so i just went to localhost and added a virtual host automatically and so it worked!!
I was having same problem.
I followed this steps, problem solved.
run command line (CMD) with Administrator Permission.
cd c:/wamp64/bin/apache/apache2.4.27/bin
httpd.exe -k uninstall
httpd.exe -k install
at last restart all services from wamp system tray icon
It turns out I didn't have Microsoft visual c++ installed, installing it solved the problem for me.
If you have Microsoft Visual Studio running at time of running, try to disconnect it and try again
When starting from cmdline
svnserve.exe -d -r d:\svn\mytools
all working fine.
Then I had tried to set it up to run as Windows service:
#echo off
set SvnHome=C:\Program Files\TortoiseSVN
set SvnRepository=D:\Svn\mytools
sc delete SvnMyTools
sc create SvnMyTools binPath= "%SvnHome%\bin\svnserve.exe --service -r %SvnRepository%" start= delayed-auto type= share
service was installed but it is unable to start.
All the time it is reporting an error
Error 1083: The executable program that this service is configured to run in does not implement the service.
I have tried to edit service cmdline using regedit, so tried to add double quotes arround ref to exe, tried to change cmdline parameters (used -d instead of --service, used both -d and --service) and so on. Sometimes reported errors are looks a bit different but it does not work anyway. :-(
Question is - how to setup it to make it working as service on Windows 7 x64?
Is it possible at all? I mean - if that "--service" cmdline switch is able to work in svnserve?
Note: svnserve version is 1.7.9 (r1462340).
Rest of TortoiseSVN components are 1.7.12.24070.
Thanks in advance.
It took me a while to figure out that the selected answer was not final, but a supplement to the question. This is the final one line command to execute:
sc create svnserve binpath="\"C:\Program Files\TortoiseSVN\bin\svnserve.exe\" --service -r D:\Repositories" displayname="Subversion Server" depend=Tcpip start=auto
Looks fine to me. My server is installed with this binary path:
"C:\Program Files\Subversion\svnserve.exe" --service -r "D:\Repositories" --listen-port "3690"
Did you try to install it outside of a script?
I realize this is an old question, but in case you need to do this on a more current Windows OS version...
On Windows Server 2012 with CollabNet subversion Edge SVN v5.2.4, this syntax worked in an elevated cmd window (NOTE the space after the = character and where the quote " characters are located):
sc create svnserve binpath="E:\csvn\bin\svnserve.exe --service -r E:\csvn\data\repositories --listen-port 3690 --log-file E:\csvn\data\logs\svnserve.log" displayname="SVN Serve" depend= Tcpip start= auto
After creating the svnserve Windows service, to add a description :
sc description svnserve "SVN Server providing the svn:// or svn+ssh:// protocol scheme"
Screenshot of Services.msc showing the newly created svnserve service:
Reference: http://svnbook.red-bean.com/en/1.7/svn.serverconfig.svnserve.html
I have googled this extensively before posting it here. I've been trying to find out a way to enable JMX Access on a Tomcat instance installed as Windows service. Its quite straightforward when Tomcat is invoked via the startup.bat script, one just needs to set the CATALINA_OPTS environment variable to something like "-Dcom.sun.management.jmxremote.port=1234 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false"
But how do i get the Tomcat Windows service to read these options? I tried this:
C:>tomcat\server\bin> service.bat install #install the Tomcat7 windows service
C:>tomcat\server\bin> tomcat7.exe //US//Tomcat7 ++JvmOptions "-Djava.io.tmpdir=$INSTDIR\server\temp;-XX:MaxPermSize
=256m;-Dcom.sun.management.jmxremote.port=8090;-Dcom.sun.management.jmxremote.au
thenticate=false;-Dcom.sun.management.jmxremote.ssl=false" --JvmMs 256 --JvmMx 1
024 #update the installed service using the //US switch; set tmpdir, JMX access and heap size
When i start the service from Services panel, the service fails to start and i get the following error on the logs\tomcat7-stderr-yyyy-mm-dd.log file:
yyyy-mm-dd hh:mm:ss Commons Daemon procrun stderr initialized
Error: Invalid com.sun.management.jmxremote.port number: 8090 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false
I don't have a Java background, am i trying to achieve something outlandish here? Please advise.
Answering my own question; turned out to be easier than i thought.
Following needs to be done, for enabling JMX access for Tomcat installed as a Windows service, that has a name "ApacheTomcatWindowsServer" for example:
Install Tomcat as Windows service, either using the command (first cd into \bin\ )
service.bat install
or your custom scripts.
Enable Apache Service Manager for the installed service using the following command:
tomcat7w.exe //MS//ApacheTomcatWindowsServer
This should start Apache Service Monitor program on your system tray. Click on its icon. select 'Configure', click on the 'Java' tab and append the following on the 'Java Options' text box, one option per line:
-Dcom.sun.management.jmxremote.port=8090
-Dcom.sun.management.jmxremote.authenticate=false
-Dcom.sun.management.jmxremote.ssl=false
Save and exit and restart the service.
To connect to the JMX console, fire jconsole from your JDK installation, click 'New Connection', specify 'Remote Process' and enter hostname:8090.
you can also uninstall the service by
service.bat remove
then edit the service.bat and add the parameters in your StartPath and add the options
-Djavax.management.builder.initial=;-Dcom.sun.management.jmxremote.port=8090;-Dcom.sun.management.jmxremote.authenticate=false;-Dcom.sun.management.jmxremote.ssl=false
here is the sample StartPath in my file
--StartPath "C:\tomcat7\" --Startup auto --JvmOptions "-Dcatalina.home=%CATALINA_HOME%;-Dcatalina.base=%CATALINA_BASE%;-Djava.endorsed.dirs=%CATALINA_HOME%\endorsed;-Djava.io.tmpdir=%CATALINA_BASE%\temp;-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager;-Djava.util.logging.config.file=%CATALINA_BASE%\conf\logging.properties;-Djava.rmi.server.hostname=;-Djavax.management.builder.initial=;-Dcom.sun.management.jmxremote.port=8090;-Dcom.sun.management.jmxremote.authenticate=false;-Dcom.sun.management.jmxremote.ssl=false" %JAVA_OPTS% ^
re-install the service by
service.bat install
then start Tomcat to apply changes