I have a table called excel that has 3 columns, name, id, and full_name. The name part is the only one I have and I need to fill id and full_name. The other table that contains the data is called tim_pismena and has 2 columns that I need, id and pismeno_name (the actual names are not important, but i'm writing them just for clarity). In pseudooracle code :) the select that gets me the values from the second table would be done something like this:
SELECT tp.id, tp.pismeno_name
FROM tim_pismena tp
WHERE upper(tp.pismeno_name) LIKE IN upper('%(SELECT name FROM excel)%')
and when used with an insert, the end result should be something like
name id full_name
Happy Joe 55 Very fun place Happy Joe, isn't it?
Use merge statement
1 MERGE
2 INTO excel tgt
3 USING tim_pismenae src
4 ON ( upper(src.naziv_pismena) LIKE '%'||upper(tgt.ime)||'%')
5 WHEN MATCHED
6 THEN
7 UPDATE
8 SET tgt.id = src.id
9 , tgt.full_name = src.naziv_pismena
10 WHEN NOT MATCHED
11 THEN
12 INSERT ( tgt.name
13 , tgt.id
14 , tgt.full_name )
15 VALUES ( src.naziv_pismena
16 , src.id
17 , src.naziv_pismena )
18 WHERE (1 <> 1);
Related
Here i want to fetch results based on the maximum date from the field so in order to get that i wrote query like this
$latest_reports = Filelist::
select('report_type_id',DB::raw('filename,max(data_date) as latest_date'))
->where('access_id','=',$retailer_supplier_id->id)
->groupBy('report_type_id')
->orderBy('data_date','desc')
->get();
Here is my table please have a look
id access_id filename report_type_id data_date
1 16 filename1 6 2021-02-01
2 16 filename2 6 2021-01-01
3 16 filename3 6 2021-03-01
4 16 filename4 6 2021-04-01
Am getting result like this
id access_id filename report_type_id data_date
4 16 filename1 6 2021-04-01
I want to get result like this
id access_id filename report_type_id data_date
4 16 filename4 6 2021-04-01
Here the first rows filename value is getting..how to solve this
This is a MySQL problem I think. You have specified only one column to group by, but more then one column in the select list so what is presented in those other non-aggregating columns isn't guaranteed to be sensible. Please refer to MySQL Handling of GROUP BY
In SQL I might re-write the query this way:
select * from mytable
where data_date = (select max(data_date) from mytable)
or
select * from mytable
order by data_date
limit 1
depending on my particular needs (and I don't know which is better for you)
UPDATE:
$latest_reports = Filelist::select([
'report_type_id',
'access_id'
DB::raw('MAX(data_date) AS data_date'),
// here can be listed the other fields
])
->where('access_id', $retailer_supplier_id->id)
->groupBy('report_type_id')
->get();
INITIAL:
I had similar working query, just there I had "created_at" timestamp field. Anyway, I think this will work for you:
// assuming, that your table name is "filelist"
$latest_reports = Filelist::select(DB::raw('t.*'))
->from(DB::raw('(SELECT * FROM filelist ORDER BY data_date DESC) t'))
->groupBy('t.report_type_id')
->get();
I have a query that gets contract_types 1 to 10. This query is being used in an SSRS report to filter out a larger dataset. I am using -1 for nulls and -2 for all.
I would like to know how we would allow multiple values - does oracle concatenate the inputs together so '1,2,3' would be passed in? Say we get select -1,0,1 in SSRS, how could we alter the bottom query to return values?
My query to get ContractTypes:
SELECT
ContractType,
CASE WHEN ContractType = -2 THEN 'All'
WHEN ContractType = -1 THEN'Null'
ELSE to_Char(ContractType)
END AS DisplayFigure
FROM ContractTypes
which returns
ContractType DisplayFig
-1 Null
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
This currently is only returning single values or all, not muliple values:
SELECT *
FROM Employee
WHERE NVL(CONTRACT_TYPE, -1) = :contract_type or :contract_type = -2
I'm assuming we want to do something like:
WHERE NVL(CONTRACT_TYPE, -1) IN (:contract_type)
But this doesn't seem to work.
Data in Employee
Name ContractType
Bob 1
Sue 0
Bill Null
Joe 2
In my report, I want to be able to select contract_type as -1(null),0,1 using the 'allow muliple values' checkbox. At the moment, I can only select either 'all' using my -2 value, or single contract types.
My input would be: contract type = -1,1,2
My output would be Bill, Bob, Joe.
This is how I'm executing my code
I use SSRS with Oracle a lot so I see where you're coming from. Thankfully, they work pretty well together.
First make sure the parameter is set to allow multiple values. This adds a Select All option to your dropdown so you don't have to worry about adding a special case for "All". You'll want to make sure the dataset for the parameter has a row with -1 as the Value and a friendly description for the Label.
Next, the WHERE clause would be just as you mentioned:
WHERE NVL(CONTRACT_TYPE, -1) IN (:contract_type)
SSRS automatically populates the values. There is no XML or string manipulation needed. Keep in mind that this will not work with single-value parameters.
If for some reason this still doesn't work as expected in your environment, there is another workaround you can use which is more universal and works even with ODBC connections.
In the dataset parameter properties, use an expression like this to concatenate the values into a single, comma-separated string:
="," + Join(Parameters!Parameter.Value, ",") + ","
Then use an expression like this in your WHERE clause:
where :parameter like '%,' + Column + ',%'
Obviously, this is less efficient because it most likely won't be using an index, but it works.
I don't know SSRS, but - if I understood you correctly, you'll have to split that comma-separated values list into rows. Something like in this example:
SQL> select *
2 from dept
3 where deptno in (select regexp_substr('&&contract_type', '[^,]+', 1, level)
4 from dual
5 connect by level <= regexp_count('&&contract_type', ',') + 1
6 );
Enter value for contract_type: 10,20,40
DEPTNO DNAME LOC
---------- -------------------- --------------------
20 RESEARCH DALLAS
10 ACCOUNTING NEW YORK
40 OPERATIONS BOSTON
SQL>
Applied to your code:
select *
from employee
where nvl(contract_type, -1) in (select regexp_substr(:contract_type, '[^,]+', 1, level)
from dual
connect by level <= regexp_substr(:contract_type, ',') + 1
)
If you have the comma separated list of numbers and then if you like to split it then, the below seems simple and easy to maintain.
select to_number(column_value) from xmltable(:val);
Inputs: 1,2,3,4
Output:
I guess I understood your problem. If I am correct the below should solve your problem:
with inputs(Name, ContractType) as
(
select 'Bob', 1 from dual union all
select 'Sue', 0 from dual union all
select 'Bill', Null from dual union all
select 'Joe', 2 from dual
)
select *
from inputs
where decode(:ContractType,'-2',-2,nvl(ContractType,-1)) in (select to_number(column_value) from xmltable(:ContractType))
Inputs: -1,1,2
Output:
Inputs: -2
Output:
I'm trying to cut down on rows a report has. There are 2 assets that return on this query but I want them to show up on one row.
Basically if dc.name LIKE '%CT/PT%' then I want it to be same row as the asset. The SP.SVC_PT_ID is the common field to join them.
There will be times when there is no dc.name LIKE '%CT/PT%' however I still want the DV.MFG_SERIAL_NUM to populated just with a Null to the right.
Select SP.SVC_PT_ID, SP.DEVICE_ID, DV.MFG_SERIAL_NUM, dc.name,
substr(dc.name,26)
From EIP.SVC_PT_DEVICE_REL SP,
eip.device_class dc,
EIP.DEVICE DV
Where SP.EFF_START_TIME < To_date('20170930', 'YYYYMMDD') + 1
and SP.EFF_END_TIME is null
and dc.id = DV.device_class_id
and DV.ID = SP.device_id
ORDER BY SP.SVC_PT_ID, DV.MFG_SERIAL_NUM;
I'm not sure I understand what you are saying; test case would certainly help. You said that query you posted returns two rows (only if we saw which ones ...) but you want them to be displayed as the image you attached to the message.
Generally speaking, you can do that using an aggregate function (such as MAX) on certain column(s), along with the GROUP BY clause that contains the rest of them.
Just for example:
select svc_pt_id, max(ctpt_name) ctpt_name, sum(ctpt_multipler) ctpt_multipler
from ...
group by svc_pt_id
As I said: a test case would help people who'd want to answer the question. True - someone might have understood it far better than I did and will provide assistance nevertheless.
EDIT: after you posted sample data (which, by the way, don't match screenshot you posted previously), maybe something like this might do the job: use analytic function to check whether name contains CT/PT; if so, take its data. Otherwise, display both rows.
SQL> with test as (
2 select 14 svc_pt_id, 446733 device_id, 'Generic Electric' name from dual union
3 select 14, 456517, 'Generic CT/PT, Multiplier' from dual
4 ),
5 podaci as
6 (select svc_pt_id, device_id, name,
7 rank() over (partition by svc_pt_id
8 order by case when instr(name, 'CT/PT') > 1 then 1
9 else 2
10 end) rnk
11 from test
12 )
13 select svc_pt_id, device_id, name
14 from podaci
15 where rnk = 1;
SVC_PT_ID DEVICE_ID NAME
---------- ---------- -------------------------
14 456517 Generic CT/PT, Multiplier
SQL>
My TEST table (created by WITH factoring clause) would be the result of your current query.
I have someting like this
id day descrition
1 1 hi
1 1 today
1 1 is a beautifull
1 1 day
1 2 exemplo
1 2 for
1 2 this case
I need to do a funtion that for each day concatenate the descrtiomn colunm and return the result like this
id day descrition
1 1 hi today is a beautifull thay
1 2 exemplo for this case
Anny ideia about how can i do this usisng a loop in a function in oracle
You need a way of determining which order the values should be aggregated. The snippet below will rely on the implicit order in which Oracle reads the rows from the datafiles - if you have row movement enabled then you may get inconsistent results as the rows can be read in different orders as they are relocated in the underlying datafiles.
SELECT LISTAGG( description, ' ' ) WITHIN GROUP ( ORDER BY ROWNUM ) AS description
FROM your_table
GROUP BY id, day
It would be better to have another column that stores the order within each day.
I have two tables affiliation and customer, in that i have data like this
aff_id From_cus_id
------ -----------
1 10
2 20
3 30
4 40
5 50
cust_id cust_aff_id
------- -------
10
20
30
40
50
i need to update data for cust_aff_id column from affiliation table which is aff_id like below
cust_id cust_aff_id
------- -------
10 1
20 2
30 3
40 4
50 5
could u please give reply if anyone knows......
Oracle doesn't have an UPDATE with join syntax, but you can use a subquery instead:
UPDATE customer
SET customer.cust_aff_id =
(SELECT aff_id FROM affiliation WHERE From_cus_id = customer.cust_id)
merge into customer t2
using affiliation t1 on (t1.From_cus_id =t2.cust_id )
WHEN MATCHED THEN
update set t2.cust_aff_id = t1.aff_id
;
Here is an update with join syntax. This, quite reasonably, works only if from_cus_id is primary key in the first table and cust_id is foreign key in the second table, referencing the first table. Without these conditions, the requirement doesn't make much sense in the first place anyway... but Oracle requires that these constraints be stated explicitly in the tables. This is also reasonable on Oracle's part IMO.
update
( select t1.aff_id, t2.cust_aff_id
from affiliation t1 join customer t2 on t2.cust_id = t1.from_cus_id) j
set j.cust_aff_id = j.aff_id;