I use two Internet connections so i want to use bash scripts to automate the task of switching between the two..
the problem is i cant able to configure firefox proxy settings via scripts, so is there a way to do that... does any configuration file exists for firefox so that i can modify over command line..
I have read this entry but this dint helped me much.. (its on windows)
firefox proxy settings via command line
you can use the "automatic proxy configuration" for this. this field takes a "pac" file which in fact is just a javascript function named FindProxyForURL that can use things like dnsResolve or isInNet to determine wether a proxy is needed or not. there is a wikipedia article which describes the files in detail and i have written a blog post a while a go that gives an example function.
Related
I'm following instructions here and it says that I will find a bitcoin.conf file Windows: %APPDATA%\Bitcoin\ and
To use bitcoind and bitcoin-cli, you will need to add a RPC password to your bitcoin.conf file. Both programs will read from the same file if both run on the same system as the same user, so any long random password will work: rpcpassword=change_this_to_a_long_random_password
However When I navigate to %APPDATA%\Bitcoin\ I don't see a bitcoin.conf file.
So What do I do? Do I add a bitcoin.conf file? There is a bitcoin-conf.md file in doc in my bitcoin install directory so maybe somthing todo with that? I really don't know. Thanks for pointing me in the right direction.
That guide does not take into account the fact that you do not have to add any RPC user or password to your configuration file for the past some years.
Bitcoind will generate a cookie that allows the CLI (command line interface) to communicate with the Bitcoin daemon using RPC without the user having had to give it a single thought.
That is a developers' guide, so developers may have more complex requirements that are solved if they specify their own RPC authentication settings, such as running multiple wallets, or possibly exchange software that communicates with the wallet or multiple wallets.
bitcoin.conf being optional, it is not by default created, and is not needed for ordinary usage, only becoming necessary when the user or developer has particular, non-default settings to set.
The possible settings can be found by the help command bitcoind -help and lists a number of command line parameters (beginning with a dash or hyphen) that can be typed or pasted after bitcoind on the command line, but can be put in a text file named bitcoin.conf without the minus sign before the command. For example: -connect=IPAddress becomes simply connect=IPAddress in the conf file.
For creating suitable rpcauth (username and hashed password), and rpcuser and rpcpassword values, I've found some resources such as https://github.com/jlopp/bitcoin-core-rpc-auth-generator
Rather than serving JLopp's RPC auth generator locally you can simply copy from, or use a Python script found in the Bitcoin repository under the folder named "share", you will see a folder called rpcauth which contains the rpcauth.py script and a small explanatory file called README.md.
You have to create this file and put a single line rpcpassword=<your_password> in it.
bitcoin-conf.md contains documentation for this btcoin.conf and particularily states:
The configuration file is not automatically created; you can create it using your favorite text editor.
Recommended reading this doc. It may help you to facilitate running your node.
Recently i've came to an issue to configure Last Participant Support on deployed application. I've found some old post about that:
https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-000014090728
On server itself i found how to do it. But with jython or wsadmin commands im not able to find how to do it on application itself.
But it does not help for me. Any ideas?
There is no command assistance available for the action of changing last participant support from the admin console which typically implies there is no scripting command associated the action. And there doesn't appear to be an wsadmin AdminApp command to modify the property. Looking at config repo changes made as a result of the admin console action, the IBM Programming Model Extensions (PME) deployment descriptor file "ibm-application-ext-pme.xmi" for an application is created/modified by the action.
If possible, the best long-term solution would be to use a tool like RAD to generate that extensions file when packaging the application because if you need to redeploy the app, your config changes wouldn't get overridden. If you can't mod the app, you can script the addition of an PME descriptor file in each of the desired apps with the knowledge that redeploying the app will overwrite your changes. The changes can be made by doing something along the lines of:
1) create a text file named ibm-application-ext-pme.xmi with contents similar to this:
<pmeext:PMEApplicationExtension xmi:version="2.0" xmlns:xmi="http://www.omg.org/XMI" xmlns:pmeext="http://www.ibm.com/websphere/appserver/schemas/5.0/pmeext.xmi" xmi:id="PMEApplicationExtension_1559836881290">
<lastParticipantSupportExtension xmi:id="LastParticipantSupportExtension_1559836881292" acceptHeuristicHazard="false"/>
</pmeext:PMEApplicationExtension>
2) in wsadmin or your jython script do the following (note in this example the xmi file you created is in the current directory, if not, include the full path to it in the createDocument command) :
deployUri = "cells/<your_cell_name>/applications/<your_app_name>.ear/deployments/<your_app_name>/META-INF/ibm-application-ext-pme.xmi"
AdminConfig.createDocument(deployUri, "ibm-application-ext-pme.xmi")
AdminConfig.save()
3) restart the server
Situation:
As a developer I'd like to "clone" our development environment (on an office server) so we can use it locally (for example when no/limited internet access is available). We've decided to give Vagrant a try.
What did I do?
First I used PuPHPet to create a basic config including nginx, php (incl modules), composer, git, memcached etc. You can find my config here. I also added a nginx vhost for our website.dev. This is where I run into the first problem.
We use a few additional config settings to the location block. A rewrite, a fastcgi_pass and a include. This is not available so I searched a lot online and I found out I could use the following statement (was more a try/fail/retry).
location_cfg_append:
{ rewrite: ".* /dispatch.php break", include: "fastcgi-params.conf", fastcgi_pass: "127.0.0.1:9000" }
First question:
This does work, however is this the way to do this? I'm not sure if I should be editing this config file (the file generated by PuPHPet) directly.
Second question:
How should I 'upload' the fastcgi-params.conf file I want to include? I did not find a way to do this in the config.yaml but there is a way to run some scripts. For now I've added a echo [contents] > /etc/nginx/fastcgi-params.conf that does work. However...
Third question:
When the VM is provisioned the nginx config is created. When that is done nginx is restarted. However at that moment the fastcgi-params.conf file does not exist yet (this is created AFTER the provisioning).
When nginx reloads this will fail, trigger an error and the machine can not finish the provision sequence (so it will never create the config file).
I can create this file on the next boot (and then nginx will work) but this cannot be the correct way to do this. So: how can I (before nginx 'installation') create / deploy a file to the VM? Or more generic (question 2): How can I upload a file to the VM?
If this is totally not the way to go please let me know! This are our first steps into creating a locally development machine so other/better methods are welcome.
First question: This does work, however is this the way to do this? I'm not sure if I should be editing this config file (the file generated by PuPHPet) directly.
Yes, I encourage this.
Second question: How should I 'upload' the fastcgi-params.conf file I want to include?
Place it inside one of your shared folders. It'll be available within the VM and you can reference it that way.
Third question
The above answer fixes this issue.
I'm working on an app that uses Jena for storage (with the TDB backend). I'm looking for something like the equivalent of Squirrel, that lets me see what's being stored, run queries etc. This seems like an obvious thing to need, but my (perhaps badly phrased) google queries aren't turning up anything promising.
Any suggestions, please? I'm on XP. Even a command line tool would be helpful.
Take a look at my Store Manager tool which is part of the dotNetRDF Toolkit which I develop as part of the wider dotNetRDF project I maintain.
It provides a fairly basic GUI through which you can connect to various Triple Stores including TDB provided that you expose your dataset via Joseki/Fuseki. You need to have .Net 3.5 installed to run the apps in the toolkit.
If you don't already expose your TDB dataset via HTTP try using Fuseki as it is ridiculously easy to use and can be run just on your local machine when necessary to make your TDB store available via HTTP for use with my tool e.g.
java -jar fuseki-0.1.0-server.jar --update --loc data /dataset
Please see the Fuseki wiki for more information on running Fuseki and the various options. In the above example Fuseki is run with SPARQL Update enabled (the --update flag), using the TDB dataset located in the directory data (the --loc data argument) and with a base URI of /dataset for the data.
Once running you can use my tool to connect to a Fuseki server by going to File > New Generic Store Manager, selecting the "Fuseki" tab from the dialog that appears, entering the URI http://localhost:3030/dataset/data and then clicking "Connect to Fuseki".
Twinkle is a handy SPARQL client : http://www.ldodds.com/projects/twinkle/
As it happens I'm working on something similar myself, but it still needs a lot of work (check back in a month :) http://hyperdata.org/wiki/Scute
first download jena fusaki from
https://jena.apache.org/download/index.cgi
un-zip the file and copy the "jena-fuseki-1.0.1" to c drive
open cmd
type for accesing the folder
"cd C:\jena-fuseki-1.0.1"
then type
"java -jar fuseki-server.jar --update --loc data /dataset"
at last open a browser and type
"localhost:3030/"
remember you must first declear the enviorment verible(located in system poperties then advance tab)
and edit variable name call "Path" in the "System verible" to
"C:\jena-fuseki-1.0.1"
I also develop a SPARQL client, Open Source in Java Swing: EulerGUI.
In fact it does a lot more, see the manual:
http://eulergui.svn.sourceforge.net/viewvc/eulergui/trunk/eulergui/html/documentation.html
For the SPARQL feature, better take the EulerGUI minimal build:
http://sourceforge.net/projects/eulergui/files/eulergui/1.11/
For a windows script I am writing, I need to detect if the machine has Apache 2.2 installed, and to find the application path.
One solution I came up with is to wget http://localhost:8080/server-info and parse the root and the config file from it. This would fail if the server does not use port 8080
Another option would be to call “sc qc Apache2.2” and to parse the returning string. This would fail if the server is not installed as a service, or is using a different name.
Is there any better way to do that?
Not a lot of great options if they didn't install it using the installer. If they used the MSI/installer, you can check the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Apache\2.2.2\ServerRoot
HKEY_CURRENT_USER\SOFTWARE\Apache Software Foundation\Apache\2.2.2\ServerRoot
You can also check the running process list:
WMIC PROCESS get Caption,Commandline,Processid
Look for the appropriate EXE. If for some reason you needed the port number, then use netstat and search for the appropriate port.
Also, when you say "a windows script", I am assuming you are using something modern and capable like Windows Scripting Host (my favorite) or PowerShell. Don't even bother with batch files.
As I recall, Apache writes some registry keys. If you know how to read them from a script, that might help.
uvdesk
Unable to locate the path on the server.
Try putting index.php after your helpdesk installation's site url or If you are using apache, make sure that mode_rewrite module is enabled and AllowOverride directive for document root is set to All/FileInfo in your server's configuration file.[enter code here][1]