For a windows script I am writing, I need to detect if the machine has Apache 2.2 installed, and to find the application path.
One solution I came up with is to wget http://localhost:8080/server-info and parse the root and the config file from it. This would fail if the server does not use port 8080
Another option would be to call “sc qc Apache2.2” and to parse the returning string. This would fail if the server is not installed as a service, or is using a different name.
Is there any better way to do that?
Not a lot of great options if they didn't install it using the installer. If they used the MSI/installer, you can check the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Apache\2.2.2\ServerRoot
HKEY_CURRENT_USER\SOFTWARE\Apache Software Foundation\Apache\2.2.2\ServerRoot
You can also check the running process list:
WMIC PROCESS get Caption,Commandline,Processid
Look for the appropriate EXE. If for some reason you needed the port number, then use netstat and search for the appropriate port.
Also, when you say "a windows script", I am assuming you are using something modern and capable like Windows Scripting Host (my favorite) or PowerShell. Don't even bother with batch files.
As I recall, Apache writes some registry keys. If you know how to read them from a script, that might help.
uvdesk
Unable to locate the path on the server.
Try putting index.php after your helpdesk installation's site url or If you are using apache, make sure that mode_rewrite module is enabled and AllowOverride directive for document root is set to All/FileInfo in your server's configuration file.[enter code here][1]
Related
I am having a Perl and a CGI file through which I want to fetch data from database. I've a UI where I am trying to use AJAX call which will hit the perl (.pl) or (.cgi) file and get the response in JSON. I've checked the perl/cgi file by running through command prompt and it works fine. This is how I am running my code in command prompt:
D:\>PerlExecutables\strawberry_32\perl\bin\perl.exe C:\Users\UserXYZ\Desktop\PerlExamples\test.cgi
The reason is I cannot do any kind of installation on my machine and also I don't want to run it through server like Apache or IIS.
How can this be achieved? Is there any way to make the script work in AJAX by passing the perl.exe path for execution or Any other alternatives?
Thanks!
One way to do this is to use Plack::App::CGIBin. It allows you to mount CGI scripts as apps with the PSGI/Plack protocol.
use Plack::App::CGIBin;
use Plack::Builder;
my $app = Plack::App::CGIBin->new(root => "/path/to/cgi-bin")->to_app;
builder {
mount "/cgi-bin" => $app;
};
Save that as myapp.psgi (or whatever your stuff is called) and run it like this:
$ plackup myapp.psgi
By default it will open up a server on port 3000 on localhost. You will need to be able to install Perl modules. Since you have Strawberry Perl that shouldn't be a problem. In the worst case, just use a local::lib.
You will also need to be able to open a port for listening. If you cannot there is no other solution than to get an admin to install you an actual full-scale web server.
The PSGI protocol and the Plack tools are a simple, easy to use replacement for CGI. They allow you to be very flexible while making it easy to have persistently running large applications.
Actually In the command of start odoo 8 server.
It will provide "--auto-reload" option
But actually i don't know how it works and when to work.
Please if give me some guideline for that
Normally if you change your python code means, you need to restart the server in order to apply the new changes.
--auto-reload parameter is enabled means, you don't need to restart the server. It enables auto-reloading of python files and xml files without having to restart the server. It required pyinotify. It is a Python module for monitoring filesystems changes.
Just add --auto-reload in your configuration file. By default the value will be "false". You don't need to pass any extra arguments. --auto-reload is enough. If everything setup and works properly you will get
openerp.service.server: Watching addons folder /opt/odoo/v8.0/addons
openerp.service.server: AutoReload watcher running
in the server log. Don't forget to install pyinotify package.
I found this looking for the same thing, but for odoo 10. Someone will follow the same route, so:
This has been changed in odoo 10 to --dev=reload. BUT you can't specify that in /etc/init.d/odoo itself. Only from the command line.
I have to write a script on Lotus Server which is on Windows server to save a csv file on UNIX server. I and Unix server path requires authentication. So can somebody help me or suggest me how to do it?
Thanks in advance.
Siddhartha
Could setting up a FTP server on Domino and accessing this from your UNIX server be an option ?
Mindoo FTP server
I once resolved this in two steps:
1. Save the file to a temporary directory on the D omino server using LotusScript
2. Create a scheduled taks on the windowd serverr to copy the file to the second server
Advantages:
You can specify any user in the scheduled task and you don`t have to care about accessibility of the other server.
Disadvantages
Two separate processes.
Hope that helos.
Michael
In my scenario which was very similar to yours, I did the following:
On the Windows Server, I created a Mapped Drive to the folder on the Unix OS. This also managed the Authentication.
In the LotusScript Agent, I extracted to this Mapped Drive, which worked 100%.
You need to provide more details. Presuming you can access the Unix folder from Windows Explorer, map the drive and let Windows store the password. Then access it through the mapped drive letter.
LotusScript can't write to UNC locations, so you need the drive letter.
That file will be probably picked up by another program. CVS is the worst approach. You could offer to write to a Web Service or provide one.
Update
On Unix "access" more often than not doesn't mean a CIFS (a.k.a Windows share) access, but SSH (or FTP). For SSH you would want to:
configure SSH Keys, so you actually don't need username/password any more
use a Java library as asked on Stackoverflow before (or an alternative)
you also could write the file to a temp directory and call a cmd file for the copy operation
With a little care (make the cmd file configurable) the stuff will work when moving your Domino to Unix/Linux too
Let us know how it goes
I've an application running on a dev server and connecting to a dev-db hosting an oracle instance.
Now i'm deploying the on a prod/prod-db machine
Since the dev-db url is hardcoded inside the java code, the just-copied binaries still points to dev-db. As a quick warkaround i added a line in Windows Host file on prod so that dev-db now points to prod-db IP address. It's work, but i'm not very satisfied of this global-scope solution.
I was wondering if exits a way to make a hosts file "private" for a certain environments ie. only valid in the scope of my running application
No, there's no way to do this, and it's a bad approach anyway.
You should instead fix the real problem, which is the hard-coding of the address inside your java code. Put such things in a properties file, and use a different properties file for production.
I use two Internet connections so i want to use bash scripts to automate the task of switching between the two..
the problem is i cant able to configure firefox proxy settings via scripts, so is there a way to do that... does any configuration file exists for firefox so that i can modify over command line..
I have read this entry but this dint helped me much.. (its on windows)
firefox proxy settings via command line
you can use the "automatic proxy configuration" for this. this field takes a "pac" file which in fact is just a javascript function named FindProxyForURL that can use things like dnsResolve or isInNet to determine wether a proxy is needed or not. there is a wikipedia article which describes the files in detail and i have written a blog post a while a go that gives an example function.