When enableCellNavigation is enabled, the initial click and double-click on my grid immediately scrolls the page down so that the clicked row is at the top of the screen. This is quite annoying since it is not expected. Is there some way to turn this off? If enableCellNavigation is disabled, rows cannot be selected so this is not an option.
You are looking for focusOnCurrentCell()
In my case grid was scrolling to the end horizontally when clicked.
Commenting the focusOnCurrentCell() inside the function setSelectedCell(newCell,editMode) solved my problem.
Related
I need expand/collapse feature to show/hide rows in SlickGrid.
So to implement this feature, I have a expand/collapse icon on the Grid header row. And by pressing it, it should Show/Hide all data of the grid (Toggle Visibility).
The feature I want to implement is exactly same as grouping where parent row can be expanded/collapsed by clicking on **+ or -** icon. But without applying grouping.
Should be pretty easy. Just find the viewport div and toggle its visibility on click. Everything else should collapse around it.
I have some pages where I have a kendo ui grid (wired up to full CRUD services), but use a separate Kendo UI Toolbar control (as opposed to the toolbar configuration in the grid itself). I have a number of different buttons/menus on the toolbar, but am seeing a strange behavior when calling saveChanges() on the grid. If a cell is being edited when the save button is clicked, the grid is saved, but the edited value is lost (it reverts back to where it was). The following details what I see in different situations:
When using a save button configured in the grid (command: "save"), any changes in a cell being edited are committed with the save.
When using a plain html button that calls the saveChanges() method of the grid, any changes in a cell being edited are committed with the save.
When using a save button configured in a toolbar control, the changes in a cell being edited are LOST when saveChanges() is called.
The following jsbin shows the behavior of all three:
http://jsbin.com/jazobexatu/2/edit?html,js,output
I have tried calling the save from the toolbar button a number of different ways (even trying to trigger the click event of the external button), but nothing seems to correct the behavior. I also tried calling closeCell() on the grid (to try to force the value back into the data, but that doesn't work either). I haven't been able to debug the javascript enough to figure out what is different. I'm hoping someone with a deeper understanding of these controls can help me out.
For some reason, the mouse down event on the toolbar button doesn't cause a blur on the editor.
You can try it yourself by clicking in the cell to edit it, then click and hold the mouse button down on the "normal" button. The editor closes on mouse down, causing a blur of the editor, and persists the change.
If you do the same thing, click and hold mouse down, on the toolbar button, the editor stays open.
I've been poking through the source, but haven't figured out exactly why this happens. My best guess would be that the mousedown handler on the toolbar prevents the event from bubbling or running its default action and the editor doesn't blur.
Additional detail: On mousedown on the grid header button and the normal button, the focused element changes (which is what causes the editor blur). But on mousedown of the toolbar button, the editor input element still has the focus.
Shifting the focus on mousedown of the toolbar might be a workaround.
Sort of a weird hack, but this works in Chrome (any should in any browser that supports activeElement
click: function (e) {
$(document.activeElement).blur();
$("#grid").data("kendoGrid").saveChanges();
}
To make my scroll view scroll, i need to check the box "bounce vertically". But when i make it, while scrolling the page. The page automatically scrolls itself back to first state if i dont keep my finger holded on the screen. Please help me.
uncheck the box bounce vertically and check the box bounces. on the scroll view section of the IB right on the top check the first three boxes. show vertical... show horizontal.... scrolling enabled.
that should do the trick. let me know if this works.
adrian
I have a SlickGrid with some Editors on a form with some buttons above it. (Save and Cancel). When i edit a cell in the grid and click the buttons above the grid - the cell does not commit it's edit. I've debugged and it is not calling : commitCurrentEdit. I've also tested on clicking an empty area anywhere out of the grid area...
Has anyone noticed this scenario and have a solution to get the cell to commit when one clicks out of the grid. Due to the various positions the grid good be in it would be hard to do an overlay.
Thanks
You can try this:
$("#buttonName").bind("click", function(){
gridName.getEditController().commitCurrentEdit()
});
I've been struggling for weeks trying to crack this nut so I'm not sure if it's impossible, or if it's my lack of coding chops... or both. I'm not a programmer and I'm a newbie to Dojo Toolkit.
I have a site using the BorderContainer layout. I'm trying to create an effect where I can use a button to open and close a dropdown type box that will contain controls. I need this dropdown to be hidden on page load, and then open when you click the button.
My problem is that when I open the dropdown, it pushes the content pane below it off the bottom of the browser window. I need the lower ContentPane to stay fit within the remaining space of the browser window when the dropdown opens. Additionally, I want the dropdown to sit outside of the scrollable container for the content below it, which is why I have it set up to sit outside a nested BorderContainer below it.
I've created a simplified version of the code to demonstrate my challenge (see link below). If you load the page you can see the center ContentPane scrolls the content. But, if you then click on the button, a dropdown div expands above the content. Then when you scroll, you'll notice that you can't see the full pane because it's in no-man's-land below the bottom of the browser window. I assume that because the div is set to display:none on load, it's size is not accounted for on page load. Then, when you open it by pressing the button, it's size is additive and the pane below doesn't know how to resize or account for the new element.
I've tried using the visibility attribute, but that leaves a gap for the div when it's still closed. I've tinkered with some code that controls the height that shows promise, but each of my dropdown boxes will be different sizes so I'd prefer that the height be set to "auto" rather than a specified pixel size.
Does anyone have any idea how I can accomplish this so that the lower pane will fit in the space without pushing off the screen?
Here's a sample of the page:
http://equium.com/scaffold.html
(I had some problems trying to insert the full HTML page here as a code sample so if that's a preferable way to handle it, and someone can let me know the best way to embed all of that code, I'd appreciate it.)
Thanks is advance, I'd really apprecaite anyone's feedback.
You might want to take a look at dojox.layout.ExpandoPane (though be warned I think it has only worked properly for top and left regions for a while).
Also, I'd suggest simplifying/altering your layout a bit. See example here:
http://jsfiddle.net/taFzv/
(It'd probably need some tweaking to get exactly what you want.)
The real issue you're having is probably that the BorderContainer has no idea that parts of the view resized. ExpandoPane takes care of that by telling the BorderContainer to re-layout after its animation completes.
It works under IE8.0. When dropdown box open, just keep pressing mouse from page and drag to bottom, you could see the content was pushed to out of page. It looks the browser could not detect it and could not add it to "scroll bar" account.
I would suggest taking out all BorderContainers except your top level one, the one with mainPage as the id.
Place your {stuff here} div into the mainPage BorderContainer, after the ContentPane with the Close/Open button. Make sure you make it dojotype dijit.layout.ContentPane, set up layoutpriority, and set region to top. Set the height to 0/x when clicking the Open/Close button, instead of setting display.
Try your page again. If that doesn't fix it, you probably need, a call to layout, resize, or both to indicate to the BorderContainer that it needs to evaluate all its children and size the "center" pane properly. Something like dijit.byId("mainPage").layout(); Do this any time someone presses the Close/Open button, after you have changed the height of any BorderContainer children.
Maybe the dijit.form.DropDownButton would fit your needs. When click the button a tooltip is displayed that can be filled with any content you want. Just as you specified, the dropdown tooltip is only displayed when you click the button, and it doesn't mess with the underlying layout at all. The tooltip sits "on top" of the page.