Codeblocks cannot find definitions or declarations of some functions in my project.
Question: Is there a way to force a re-scan of the source tree?
I believe that all of the relevant files are included into the project.
(Just checked: it cannot find by name a struct declared in an opened file.)
First, let me give a couple of ways to help C::B find your declarations/definitions.
Although somewhat obvious, you should make sure the function is in a file that is either:
1) part of the project itself (i.e. it should be shown in the projects->workspace window). If you intended it to be part of the project but it isn't there, then go to project->add files and add the file.
2) If you don't want/need the file to be part of the project but you still want to access the declarations/definitions, you need to let the project manager know where to find the file. You can do this in project->build options and set the search directories. Be careful when setting the search directories...you can set it for the whole project or build target (debug or executable).
Note: one common problem occurs when you have multiple projects open in C::B. Even though all your projects are "open", there is only one that is "activated". So, just because you have a file open, it doesn't mean the file is part of the activated project. You can do search-->open files" which will find code in a file if it's open but not in the current active project.
The only way to "re-scan", is to rebuild your project after making changes in the source code or project settings. You may have to restart C::B. If you still can't find the declaration/definition after doing the above, I would suggest you make a sample program and see if it will find the declaration/definition. If it does, then you can check the settings between your project and the sample project. In the worst case, you can copy your code from your project to the sample project. If that doesn't work, you can reinstall C::B and try again. Not fun but sometimes it works.
You can try, rebuilding the project, but make sure at least one other file includes the header for the structure or make sure the header and source file are included in the project.
I have been in this situation quite a few times where visual studio does not honor the Additional Include Directories when it comes to lib and header source files. For example, I just downloaded MyGUI source code and made sure the include directories were correct. I even put them to absolute paths, Visual Studio still complained that it could not find specific header files.
Does anybody experience the same thing with projects, and if so, is there a solution to this problem?Blockquote
EDIT: My apologies for not being able to explain fully. I know that the library and source files have different include directories. The project that I received had correct directory paths for the Additional Include Directories and Additional Library Directories but Visual Studio still failed to recognize them properly. I can right click and open the header file within Visual Studio but when compiling it still complains it cannot find the required header files. I regularly make projects relying on a framework I myself programmed, so I am quite familiar with how to set up dependencies. This is however the second time this seems to be happening. I don't recall which 3rd party project I was trying to compile last time, but Visual Studio simply refused to believe that the Additional Include Directories paths is where it should look for the header files. I am not sure how to give the complete details of this particular library (MyGUI) but I can point you to the website where you can download it to try and see if it is able to find the header files that are included in the project (if it doesn't compile, that is fine, and it is probably because of additional dependencies, but it should at least be able to find files in the common folder, especially when I put absolute paths in Additional Include Directories)
This happened to me once. It turned out the inconsistency of the Debug vs Release builds. When I modified one build, the other build was being compiled. Please set both builds with same include folders and see if it works. Good luck.
I've just spent some hours battling with failing #include paths in the compiler, inconsistencies between the compiler and intellisense.
What I finally discovered was that in the properties of the *.cpp file -- not the project, but the individual *.cpp file -- the "Additional Include Directories" property was blank. I had to explicitly set it to "inherit from from parent or project defaults" -- there's a checkbox near the lower-left corner of the dialog for editing the directory path.
I had copied this file from another project and used "Add > Existing Item..." to add it to the current project. My hypothesis was that maybe the "Existing Item" procedure skipped a property initialization step that "New Item" would normally perform. But I just tested that hypothesis by Adding another Existing and a New. Both of these files had their property set to inherit from the project, so I don't have an explanation for why my problem file was not initially set to inherit.
Anyway ... after much frustration, found and fixed that one.
I have found (stumbled) on the solution (I think). It has something to do with the character limit imposed by the OS. Although the limit should be 260, for me it falls in the below 150, see this discussion and links to it. I downloaded and unzipped the file to C:\Users\MyUserName\My Documents\Downloads\Downloads From Chrome\MyGui3.0...[and so on]. I learned quite some time ago not to try to compile projects under such long paths, but this time it completely slipped my mind as VS did not give me a warning at all and pointed me in the wrong direction. Anyway, cutting and pasting the project to D:\ fixed the issue. I am not going to checkmark the answer however until someone confirms this.
I have the same problem : Can't find .lib file even though I've added the additional include directory.
From an answer of Additional include directory in Visual studio 2015 doesn't work, I tried:
delete the .suo file and restart VS
Then it works for me.
I had this issue too. Just like sam said - this string value containing path to your framework includes has to be the same for the Debug and Release configurations. So the best way is to choose "Configuration:All Configurations" and "Platform:All Platforms" from the two context checklists on the top of the project properties window before typing it in, or copying from windows explorer adress bar.
Can you elaborate on this? If I recall, there are at least two places in Visual Studio where you can configure this:
Per-installation: Tools/Options/Projects and Solutions/VC++ Directories)
Per-project: Project/Properties/Configuration Properties/"C/C++"/General/Additional Include Directories
If you're adding the include directories per-project (#1), which I think you are, and then trying to include from another project, this will obviously not work. Try adding them at the per-installation level and see if it works.
Also, this may sound stupid/simplistic, but make sure the path is right (i.e. copy-paste into Explorer's path bar and see if the header files are in that folder).
If by lib files you mean library (.lib) files, the directory location is not specified through C/C++/General/Additional Include Directories but rather through Linker/General/Additional Library Directories.
It's logical if you think about it. C/C++ options are all compilation options, settings involved with compiling .cpp and .h files. Linker options are all linking options, settings involved with linking up .obj and .lib files.
I had the same symptoms in my c++ project. Navigating from header to header went fine, but after toggling to the source file of a header (let's say foo.cpp), then the navigation to an #include <bar.cpp> in that source file failed. I got the following error:
File 'bar.cpp' not found in the current source file's directory or in build system paths.
After research I noticed that the system build path given in the error where not extended with the include paths of the project. In other words: IntelliSense didn't know that the source file (foo.cpp) was part of the project, and therefore it didn't use the include paths of the project to search for the #include <bar.cpp>.
The fix for me was creating a file intelliSense.cpp (file name doesn't matter) that is part of the project, but excluded from the build. This file contains an include for each source file. ex:
#include <foo.cpp>
#include <bar.cpp>
...
This way IntelliSense knows that these source files are part of the project, and will therefore use the include paths of the project to resolve the #includes in those source files.
For me the issue was that .vcxproj Project file was read-only and after I added my directory to "Additional directories", the project file did not actually change. I was surprised that VS did not complain about this file being read-only.
So after I made that file write-able I could compile my project.
Here is another 'I had the same...' in vs2015.
For me it turned out that the active setting is also depending on the 'solution configuration' and 'solution platform'. That makes 4 settings which all should be identical.
That solved the problem in my case.
I realize this question is over 10 years old at this point, but I also just ran into this issue and none of the answers fit my scenario. After some playing with my IDE (VS 2019) for a few minutes I realized that the cpp file I was using had it's platform set to Win32, but the libs I was trying to use were built for x64.
As others have stated, make sure your project's configuration is set to
-"All Configurations" when you add the necessary paths to your project as that can also be an issue. I imagine my issue will not be as common, but I figured it was worth sharing. I hope this helps someone else in the future.
One more possible reason not mentioned earlier: make sure you are configuring properties of the correct project in a multi-project solution.
My problem was that I had a solution of two projects each using the same file with includes. Turns out that I correctly configured 'Additional Include Directories' only for one of two projects and totally forgot about another one. Of course error message was stating that only the second project and not the first one had problems.
I have two projects in one Visual Studio 2008 solution. I'd like to use the primary output from one of the projects as an embedded resource in the other, but for the life of me I can't find any way to accomplish this.
If I simply add the output file as a resource, then it doesn't seem to change when its source project is rebuilt. I even have the project dependencies/build order set up properly and this does not seem to help.
Anyone have any hints for me?
Thanks!
the best option is to "reference" the other project as if it were a class library.
that way you make sure the whole references tree is copied to your output dir.
When you add an existing file to a project, Visual Studio copies the file into the project's directory.
Any subsequent changes to the original file are ignored.
There are two workarounds:
Add a post-build action to the first project that copies its output file to the second project, and edit the dependencies so that the first project is always built first.
Add the output file to the second project as a link (Click the down arrow next to the Add button in the open dialog).
This will reference the file from its original location without making any copies.
Set the output directory of the project that generates the resource to point to the resource directory in the project that uses it.
If that's not possible for some reason, use a post-build command (also available in the project settings) to copy the file there.
I am building a cross platform product and one of the requirements is across windows(win32,AMD64 and IA61). The product as is relatively simple CLI but we have a separate build team who checks out the code from CVS and build in separate build environments. I am able to build succesfully(using Visual C++ 2005) in one platform(AMD machine). But once I check in the code, check out the build fails.
The cause of the build failure is because the include library paths are wrongly specified in the property sheets. Specifically the output file folder under the Linker in property pages are specified wrongly. So these libraries get built in a different folder from where the other projects are expecting them.
However along with the source I check in the .sln files (and later .vcproj files) also everytime. Morover if I open the .sln file in the folder where the build is not succeeding, there is no difference between the one where I could succesfully build(pre check in). In fact using windiff I could not see any difference between the two build folders (except some .ncb and cvs log files).
So any idea what is going on? Where does VC++ 2005 take the include directories take the output folder path from if not from .sln? Is CVS somehow interfering with the process? Anything else I could try out.
Thanks in advance.
Just to update the problem was resolved. The root cause is the .vcproj files were not getting checked in CVS!! This is where the individual project settings were stored(I was under the impression that this is done in .sln files).
I think the problem can be that after you have changed the settings in one build configuration (for example x86-Release) but forgotten to change them for another configuration (for example ia64-Debug), and when configuration changes, you have this problem.
Another thing that I would check on your place is project dependencies. If those are set in the right way VS will look for project output exactly where it is outputted, even when you change the output folder.
Do you have any binary files checked in as ASCII?
The round trip to and from CVS can corrupt binary files that are incorrectly marked as ASCII because CVS performs character processing on ASCII files (e.g. to give you the correct end of line codes for your OS). Corruption can occur even in an all Windows environment.
See the Binary section in the CVS FAQ for more information.
I am building a project using Visual Studio. The project has a dependency on a lib file generated by another project. This project is there is the parent directory of the actual project I am building.
To be more clear,
I have a "ParentDir" which has two subDirectories Project1 and Project2 under it.
Now Project1 depends on lib generated by Project2.
In the properties of Project1, I am trying to give a relative path using
$(SolutionDir)/../ParentDir/Project2/Debug
But this does not seem to work.
Can you tell me where i am going wrong, or suggest the correct way of achieving this.
Add the dependant project to your solution and set it as a dependency of the other project using project properties. Then it just magically works ;).
A solution is just a file that describes a set of related (interconnected) projects and the relation between them, so this is the correct way of doing it.
Your current dir is your $(ProjectDir), that is where .vcproj file is.
So, just write ../Project2/Debug, that will do.
Even better, write ../Project2/$(ConfigurationName) for all configurations
thus you will be always linking to the correct version of that lib.
I think Visual Studio does not expand the relative path properly when the ".." is placed somewhere in the middle of the path string. It only knows how to expand ..{sub-path}.