I have upgraded my iphone to iOS5 to test my application behavior on iOS5
After verified it has issues, i have downgraded my device to iOS 4.3.5
since than I am trying to debug my application using XCode and get the following error:
Error starting executable
No provisioned iOS device is connected.
Does anyone know how to fix this issue - so i can debug my application again?
Edit:
Also another relevant piece of info when I use the configuration drop down selector i get
Under Active Executable - "no device available"
I have managed to fix the issue:
I took a look at the following similar question :
Xcode - No provisioned iOS device is connected
So i wanted to see what i see in the snapshot that the user had : and there it was...
I didn't see any information like he did, all i saw was
A button called "enable for debugging" if i'm not mistaken.
Clicked on it, and Worked like a charm.... :)
You could try deleting the provisioning profile from the device via the xcode organizer window, or within the Settings App on the device. Then add back your current prov profile from the iOS provisioning portal.
Also, make sure you have the debugging symbols/SDKs for that iOS under
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/[insert ios version folder here]
And:
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/[insert ios version folder here]
Related
I have been building mac app on my mac mini and it always worked well but today i faced this error, searched a lot but no luck.
Message from debugger: unable to attach
What i tried:
Clear derived data
Quit Xcode
Restart machine
installation directory set to blank and also to /Applications
Tried Skip Install No / Yes
Using developer Signing certs
M using only Developer certificates and not provisioning profile to sign my cocoa app
Xcode 8.2
OSX 10.12.1
Please help :)
This is what fixed it for me, perhaps it will help others but I do realize the question was for 8.2. I had it set to Xcode 9 "New Build System" disabling this and switching to "Standard Build System" in the Project Settings under the File Menu. I had tried all the other things like killing DerivedData, clean build, restarting Xcode. I also verified that my dependent libraries were set correctly. The only thing that worked was disabling new "New Build System"
I just had this problem today. I have little demo code in a mac project(created with Xcode 9.4). This error just started to occur after I upgraded system to macOS Mojave 10.14. However, in Xcode 10 this project runs no problem(without changing anything). If you can use Xcode 10 it will probably be fixed.
Unfortunately, the above solutions didn't work for me (although I am sure they work for some people).
Here is what worked for me, in case this helps anyone else:
Close Xcode
Open Xcode and Create a new Xcode project
In the iOS template, select Single View App then click Next
yes, I know you are trying to get a macOS app attaching to the debugger :).
Give the iOS app any product name and organization identifier you would like and click Next
Create the new project anywhere you would like (I saved it to my desktop)
Build and run (cmd + r) the iOS app on a simulator like the iPhone 8 (starting a simulator and running the iOS app will take a little time, so have patients)
After the iOS app runs in the simulator, click to stop it from running (the stop button is next to the run button)
Open your macOS app that you are having trouble connecting a debugger to, and build and run it (cmd + r)
This, for some reason, allowed me to connect to the debugger with my macOS app...
Xcode version: 10.1, macOS Mojave version: 10.14.2
My macbook registered to my apple account which is I'm using on Xcode. Im taking 'no devices registered' warning. How can i fix it ?
Plug in your own device to your mac, then on Xcode change the simulator to the device you just plugged in, the issue shall be gone.
Change the simulator back to whatever you want if you don't want to work with your own device.
Select Organiser from XCode. Now under Devices, select your device. If it is not ready for development then click use for development.
If above doesn't solve your problem then from your project settings, set deployment target to one which your app is developed for or lesser.
Otherwise there is some issue with certificates and provisioning profiles. Make sure your device's UDID is added in the provisioning profile you are using.
This is a bug even in Xcode 9 beta. May be not a bug. When you are trying to get back to a previous version, e.g. the GA version, you might not see any simulators.
For me it was caused by updating the iOS develoyment target to version 11. Once I switched back the target to 10.3 the simulator devices reappeared.
Also the beta might have edited the “Swift Language Version” (SWIFT_VERSION). It is also required to be configured correctly. Back from version 4.0.
my app crashes in the simulator.
Just installed OSX Mavericks with XCode 5.
Developed the app using Corona SDK.
I deleted my old provisioning profiles and created new ones.
my Bundle ID is something like com.company.appname
I get the following error message in the console log from the simulator:
killed testapp[pid xxxx] because its use of the keychain-access-groups entitlement is not allowed (error code -67030)
I already deleted all old project screenshots / files. Don't know what to do.
The compiled app runs fine on my iphone 3gs with iOS 6.1 though.
any help highly appreciated
roman
Corona's engineering team is looking into this. Please add your information to this post on the Corona SDK Forums
http://forums.coronalabs.com/topic/40706-app-crashes-in-xcode-simulator-ios-7-sdk/page-2
Using Xcode 5 GM, anytime I switch to the 5.1, 6.0 or 6.1 simulators to test, I get the error "iOS Simulator failed to install application." When I reset the simulator it works, but this is getting very tiring.
Anybody have a permanent fix or workaround?
Looks like this is a known issue. From the Xcode 5 release notes:
After switching the minimum deployment target of an application from
iOS 7.0 to a release prior to iOS 7.0, building and running the
application may fail with the message “iOS Simulator failed to install
the application.”
Go to the iOS home screen, click and hold the application icon, then tap the hovering “X” button to delete the application. 13917023
Another release note:
iOS Simulator
If an iOS app is detached, relaunching the same app from Xcode will
result in a black screen in the Simulator even though the new app is
launched. Terminate the app in the Simulator or relaunch it for the
second time. 14648784
Delete the old version app in your simulator (usually iOS 6.x).
Alternatively, header over to iOS Simulator - Reset Content and Settings.
This can be easier when you have a lot of apps on the simulator and can't remember which one you're currently working on.
You need to do this for every iOS Simulator version that causes the problem.
None of the other suggestions worked for me. However, after comparing my existing app settings to a new vanilla project, I noticed that the "Build" field for my Target was blank. Once I put something in that field, the app installed just fine!
if you have already developed project and you used xib to develop views then
X-Code > Inspector Selector Bar > Interface Builder Document > opens in > and change from Xcode Default(5.o) to Xcode 4.6 .
Build and Run your app it will run successfully, if it won't run again then, header over to iOS Simulator - Reset Content and Settings. delete old app from simulator then Run again.
i got the same problem but solved by following way....
Launch the iOS Simulator
Go and click "iOS Simulator" menu
Click "Reset content and settings"
Close simulator and rebuild your app.
Above screen shot is showing the way how you can do this...
I think this works for you...!!!
Deleting the app in the simulator works for me.
just wanted to add that this happen only if I open xib that created in xcode 4.6
If it's other files, this not happen
try this ....
in my case nothing have worked for me , after resetting the content simulator also , i am not able to install the app on simulator . after that i just changed my project location . i just moved the project to other location . then it installed successfully.
None of the above things worked for me. I just reinstalled xcode and it worked.
Ran into this issue today. Found it was an empty Reference Folder (blue folder) causing this. Removed the folder from Resources in Build Phase... cleaned build folder for the heck of it, and it went away.
/Users/YOURUSERNAME/Library/Developer/Xcode/ --> remove all contents of this folder, then simply launch the app from Xcode.
To check your Executable file settng ex.$(EXECUTABLE_NAME)
(Project setting - info property page)
I have different issue when getting error message “iOS Simulator failed to install application”, the reason is because I have added a property in App-Info.plist without any value. For instance, [Application Category] with no value. Thus the error will show up as well.
When I got this error, the image of the phone actually appeared, but the image of the app I wanted to test did not. Instead, I was on the main page of the phone that shows the apps you have. I fixed this problem by deleting the many icons that appeared on the start screens - about 30 of them. These had been created when I testing apps over the months. So, not saying its a solution, but it started working after I deleted the old app images.
For me it was -framework XCTest.
It made the app die with iOS Simulator failed to install application
and on the device Could not inspect the application package.
Removed it and now works.
You are using Xcode GM which is under beta stage. Use latest Xcode 5.1.1 available.
Also, these error occur while switching between simulator (32 bit and 64 bit).
Quit the simulator and re-build the application. OR
Reset simulator from "iOS simulator" -> "Reset content and settings.."
I changed my app name and bundle id midway. I happened to delete the Executable File name in my plist. I changed it back to "${EXECUTABLE_NAME}" (no quotes) and I'm back in business.
I ran into problem with testing my app on iOS and Xcode when I am uploading it to my actual devices (iphone and iPad), and I'm wondering if someone knows the issue and can help me out:
Normally when I build my app on my devices, the app is installed and launched on my devices. But as I am preparing for submitting my first app I was testing around and changing the Bundle Identifier, App ID, and Development Provisions (so the issue may have something to do with it), and now, when I try to build my app on my devices, although it's installed on my devices fine, Xcode will not launch the app anymore. Instead, I got this error message:
Error Starting Executable.
Error launching remote program: No such file
or directory.
Does anyone know what the issue is? And What is this derived data folder about?
Much thanks!
I have also faced that problem. I have closed, restarted Xcode; deleted the application from device and reinstalled it again, then the problem has gone.
Running App from a Clean Slate
For me the problem did not resolve until I did the following in this order:
Delete the app from the device (Do this before trying to debug again)
Quit XCode (Don't just close the project)
Delete the app build folder (example path: /Users/myusername/Library/Developer/Xcode/DerivedData/MyProject-fhkaamuyvqhubaezinqbmxbnaufd/)
Restart XCode
Finally -- Try debugging again on the iOS device
The app build folder of step 3 refers to your app's build folder that is a child of "DerivedData". To find this you can reveal your app in finder, then backtrack until you get to "DerivedData" folder and delete the folder above that like "MyApp-crazylongweirdletters". Without this step (3), I could not debug, so this is a critical step and you must quit XCode before you do this step.
For some it appears simply restarting XCode does the trick, but not for me.
I only post this answer because the earlier answers did NOT work for me. Hopefully others banging their heads will find this and get a sigh of relief. :)
Notes:
The issue started happening for me when I modified the bundle id of the app.
My code signing is and was correct. My provisioning profile was the "Team Provisioning Profile" which should work for any app id (default for "iPhone Developer" automatic profile selector).
I was doing a DEBUG build (not release / distribution).
You cant debug (start from Xcode) an application signed with a distribution profile if I remember well... And then you get such messages, gdb failling to attach to process.
I finally found my error!
I was playing around with my info.plist file, and I changed the Executable Name and Bundle and Bundle Display name! As soon as I changed those back to the Defaults (EXECUTABLE_NAME, PRODUCT_NAME, PRODUCT_NAME respectively) it worked perfectly.
Delete the app from the device (tap-and-hold then delete) and try again.
For me, none of those worked. Same error, but different solution.
My problem was cause by me accidently changing the "Deployment Target" (ios version) to a version higher than what was on the phone I tried to run the code on.
The fix was simple - drop the deployment target to below or equal to the ios software version on my phone :)
I got the same error by not having my code signing correct.
Go to your project > Targets > Build Settings > Check code signing for debug state.
I stumbled upon this as a solution to another issue whch was a warning when trying to build an app on a new 4.3.5 device.
If i set the profile to distribution I do not get a warning message when building the app, but the debugger will attach to the device.
If i set the code signing to the distribution profile, i get no warnings in the build process, but the debugger will not attach. So the answer above about being signing based seems to be correct. This might also only be an issue on newer 4.3.5 devices with xcode
Product -> Clean in the menubar
This error some times happen due to incomplete "Restore" or "Sync" process of your device which keeps the .app files locked up.
What I did I had to jailbreak my device to go find the app under /User/Applications/XXXXX-XXXX-XXX/ and phisically delete the .app
For one of the apps it worked and for other one I realized it just does not run GDB automatically so the error message is totally misleading, so I set the GDB to manual and it worked and did not give me that error, but of course I have to run the app manually for the debug session to start.
It also may have required some other stuff that I did before like checking the provision profile, but this was the last step that made it work.
Before this I tried all the solutions did not work for me, and obviously simply deleting the app by holding down your finger on the screen did not work, as it removed the icon but all the files were still there. ( Since it was a development app not a downloaded App Store app )
had same problem,
quit the XCode...delete app from device...run the program again..
i solved that way..one of my friends had to restart the device.
I have the same problem. I solved it by changing the project's directory name and then launching the app again.
I had this problem on a recently restored device where my in-development apps had not been reinstalled—they were showing up on Springboard as "Waiting" to be downloaded from the App Store. Deleting the app from Springboard fixed the problem.
I've faced this issue since yesterday on two different devices, both iOS 4.x. Deleting the DerivedData folder, deleting the app, restarting the Xcode, and cleaning the code did NOT work. Repeating all the steps, in addition to rebooting the device fixed it for me.
Here I am posting an update to the issue. Might be helpful for someone with the same problem. I have Xcode 4.4 and launched it on a device with iOS 5.0 . If Xcode doesnt have the 5.0 simulators