My macbook registered to my apple account which is I'm using on Xcode. Im taking 'no devices registered' warning. How can i fix it ?
Plug in your own device to your mac, then on Xcode change the simulator to the device you just plugged in, the issue shall be gone.
Change the simulator back to whatever you want if you don't want to work with your own device.
Select Organiser from XCode. Now under Devices, select your device. If it is not ready for development then click use for development.
If above doesn't solve your problem then from your project settings, set deployment target to one which your app is developed for or lesser.
Otherwise there is some issue with certificates and provisioning profiles. Make sure your device's UDID is added in the provisioning profile you are using.
This is a bug even in Xcode 9 beta. May be not a bug. When you are trying to get back to a previous version, e.g. the GA version, you might not see any simulators.
For me it was caused by updating the iOS develoyment target to version 11. Once I switched back the target to 10.3 the simulator devices reappeared.
Also the beta might have edited the “Swift Language Version” (SWIFT_VERSION). It is also required to be configured correctly. Back from version 4.0.
Related
I updated to the latest AppStore release of Xcode (12.3, 12C33).
It worked fine for an hour or two. After that it started to constantly freeze after being open for a few seconds to minutes.
I've tried the following, all without success so far:
restart macOS
clear derived data
tried with different projects
updating to latest macOS 11
Any other ideas or suggestions how to fix this?
Update
I can confirm that this is fixed in Xcode 12.5
I found an answer by Darr on the question "Xcode freezes after upgrade to 12.3" on Apple's developer forums that worked for me:
Unpairing my device connected via network and using only lightning cable seems to have resolved the issue for me.
Xcode > Window > Devices and Simulators > device > Connect via network
After going mad, I fixed this by removing all devices from Devices and Simulators (I had connect via network activated).
For now, it's working fine.
Power off your Apple Watch
Xcode may hang if the host Mac is connected to an iOS device which has one or more companion watches. The hangs occur when the watches aren't fully prepared for development, or if they are experiencing poor wireless connectivity. (72490921) (FB8945320)
Workaround: Power off the watches, or unpair them from the iPhone.
Xcode 12.4 Release Notes
You can force Xcode to freshly prepare a watch for development using these steps:
Force-quit Xcode.
Power-off and disconnect all iOS device from the Mac.
Reboot the Mac.
Launch Xcode, close all projects, and open the Devices and Simulators window.
Power-on and unlock an iOS device and its companion watchOS devices by entering the passcode as required.
Plug the iOS device into the Mac using USB cable.
Check each iOS device and each watch for any pairing request and approve the requests.
Monitor the status of device preparation in the Devices and Simulators window. If Xcode presents device-preparation errors, follow the guidance in the error message to resolve the error.
Once Xcode finishes preparing the iOS device and its companion watches for development, repeat steps 5 through 8 for each remaining iOS device and its companion watches until you verify that Xcode has prepared all devices for development. You may now open your Xcode projects and resume development.
I've been having the same problem. I had an iOS device connected via USB, unplugged it and it un-froze. Then I continued to have issue requiring force close each time.
I then clear derived data and things have been fine. I opened a StickerPack project and also had the same issue. Clearing DerivedData also fixed it.
Clear Derived Data:
Xcode pulldown menu > Preferences > Locations tab
Click the little arrow next to the path under Derived Data.
Delete the entire folder for you project. It will look like "MyAppName-bwonddotztrgkkfexrjxoncvmjit"
See this explanation about whether it's safe to delete DerivedData for your project.
I had the same problem with appstore version and someone advised to install from site, now it works fine. https://developer.apple.com/download/more/
Disable WLAN on my iMac fixes the problem currently.
Hope they will releast a fix very soon.
Xcode 12.3 is unstable and many times it crashes.
I reverted back to Xcode 12 and copied disk image of 14.3 in Device Support folder of Xcode (Contents > Developer > Platforms > iPhoneOS.platforms-DeviceSupport).
This I needed to debug on iPhone device having version iOS 14.3
https://github.com/mspvirajpatel/Xcode_Developer_Disk_Images/releases
I recently had similar situation. My Xcode 12.3 project could not be opened. I tried to open directly from popup that appears on start of the Xcode.
What worked for my was to downgrade Xcode to 12.2 and launch Xcode on new project. And then click my old one.
Maybe it would work without downgrading but I didn't check.
I had this problem too. I fixed it by going Devices and Simulators in the Windows file and disconnecting the iPhone reference I had for my phone when testing and app. Since the phone was no longer connected, its presence seemed to create a freeze.
In my case XCode 12.5 hangs/freezes on startup more or less instantly, right after it opens kind of an empty workspace.
I removed everything that I could imagine that deals with XCode on my machine, but it didn't help.
At the end I just used the hotkey for "Close Workspace" - Ctrl+Alt+Cmd+W
I hit this combo very often, very fast right after opening XCode and it worked!
The strange empty workspace showed up and closed instantly - now I could select other projects and everything works again.
There could be the multiple reasons and in my case reason was source control
preferences > Source Control > uncheck Enable source control
I have these performance problems with the newly updated Xcode from the AppStore to 12C33 (Xcode frozen for many seconds, instability of interface builder, etc.) only with apps which have frameworks added with cocoa pods and when working in the xcworkspace-file. (Integration of frameworks with Catharge even fail with error message 65). I'm running Xcode under macOS Catalina. Don't know what the technical reason could be, hence would appreciate if someone has an idea on this how to fix it.
Update: In the meantime I could fix it:
I eliminated my own devices from the device list and did then a deintegration and a new install of the cocoa pods for the projects. Afterwards I setup my devices again in the device list and all worked well again. Only eliminating and reintegration of my devices as described above didn't work in my case.
I am developing an app that uses GPS. In the simulator I always used the location simulation feature of Xcode which always worked for me.
I selected the Debug - Location - Freeway Drive option in Xcode 10.
Whenever I select some preset to simulate, Xcode shows the following error:
[Client] #Spi, Interrupted
GPS is enabled on the simulated device and the app has permission to access the GPS. I already tried to restart the simulator multiple times, selected another device, but no device works. Does anyone have a solution to this?
Regards
Xcode 10 is broken with respect to Location Services in my experience. I've had to go back to 9.4 to develop and debug apps, but even then I have had problems with running apps originally modified with Xcode 10 running in iOS 12.
Apple is having serious, SERIOUS quality control issues and legacy issues with each new release of Xcode and iOS. I'm very frustrated and annoyed.
I was having this issue and reseting the simulators seems to have fixed it for now:
$ xcrun simctl erase all
Simply click City Bicycle Run and then City Run in Debug -> Location in the Simulator over and over again until it works. At least it worked for me that way
I'm suffering the same issue with Xcode 10.1 and iOS 12. Several restarts of the App and toggling between different locations (None, Apple, City Bicycle Ride) make it work again.
Quite annoying
This worked intermittently as a workaround for me:
On the simulator debug menu, select location and freeway drive (or whatever you want) several times until it starts to track the location.
It also helps to build the app on the simulator again
Good luck!
Looks like the location simulator has not been fixed in Xcode 10.1 update.
In the simulator, go into device settings / Privacy / Location Services. Toggle Location Services off and then back on.
I've already seen a similar question that doesn't give a valid answer to me: In Xcode I see (no paired Apple Watch) even though the watch is paired and the watch's UDID is registered
I really cannot understand how to have my Apple Watch working on Xcode.
Even if I create a new project or if I add a watch target to an existing app I always see in the device choice this status "My iPhone (No paired Apple Watch)" but my Apple watch IS paired...
Sometimes the message changes and I get "My iPhone (Paired device not available for development)".
My current environment is fully updated to the latest software versions (Xcode, WatchOS, iOS and OS X).
Are there any magic solution to make it work?!
For what it's worth, I just ran into this problem. My phone and watch are both registered, etc. I checked my provisioning profiles on the developer portal and they happened to be invalid (I reset something along the way).
After fixing them, downloading, and double-clicking them, the watch appeared as paired again.
Just experienced this. It was caused because the ios app which contains the watch app was out of date on the phone. After switching target to the ios app and building and run it on my phone, I was then able to switch back to the watch app and successfully run it on my watch.
Xcode Version 8.2.1 (8C1002). macOS 10.12.3 (16D32).
On Xcode 10 beta, I experienced the (no paired Apple Watch) scenario
After a few moments, the "Do you trust this computer" dialogue came up on the watch. after accepting it, Xcode saw the watch right away
I upgraded my iPad device OS version recently to 5.1.1 (9B206). From that my Xcode is not detecting my device. Am just getting iOS Device and simulator options in my Xcode. But am getting my device in older version of Xcode and iTunes. For this i updated my MAC OS version to 10.7.4 and Xcode version to 4.3.3. But still am facing the same problem. Now how to make my Xcode to detect my device?
This Worked for me.
Quit Xcode.
Disconnect the device.
In a terminal window, type: sudo pkill usbmuxd (it will be restarted
again automatically)
Restart Xcode
Connect the device
Your device should now be visible again in Xcode!
Open the Organizer in Xcode, go to devices, find your device and click the option to use for development
I just plugged into another USB port and it detected by device.
In another case, check the "iOS Deployment Target" in "Build Settings",
if the target iOS version number is great than the version of device,
then the device will not show in the list.
Say that, the "iOS Deployment Target" == 7.0, and the version of device is 6.0,
to solve the problem by change the "iOS Deployment Target" to 6.0 or lower.
If the chosen answer still does not work for you try this:
Select the project in project explorer
Select the target on the main window
Select Build Settings
Select Deployment
Select iOS Deployment Target. Change it to the version of your device. (e.g. iOS 5.1)
I was also faced the same issue in Xcode, my device was not detected after update the Xcode latest version(7.3.1)
Done so many things what suggested in the web-search but still the device was not detected.
Finally, I just quit and open the Xcode my device was detected(oh my bad).
This SO answer solved it for me https://stackoverflow.com/a/56054170/5813473 .
sudo killall -STOP -c usbd
did the magic.
Well later I had to unplug/plug in again at occasions, but that 'killall' really solved the original issue.
Most recently, Xcode 8.3 and iOS 10.3 seems to have more security around Xcode accessing the iPad/iPhone. My sequence:
Rebooted the machine,
Attached the iPad,
Gone through a "trust this computer" security cycle on both iMac and iPad
Xcode can now see the device
Sometimes restarting Xcode helps. Give it a shot.
In my case, restarting Mac worked and no other solution.
I updated my iPad (it's in Settings -> General -> Software Update, near the top) and restarted my computer and Xcode sees it now.
FWIW I tried all the tips in this thread and nothing would work: from reboots, command line statements, unplugging, different USBC ports, etc. I also tried something not mentioned here (yet) by going to "Settings > General > Reset > Reset Location & Privacy" ... however even this didn't work.
Later on in the evening I was in a different room of the house and out of nowhere I got the "Trust This Computer" prompt on my iPad. I of course tapped "Trust" or whatever and then magically my Mac laptop finally sees my iPad.
I realize I'm not really giving a helpful tip/fix here - just sharing how things went for me in case anyone finds useful.
iPad: iOS 13.4.1 | Macbook laptop: OSX 12.3.1
Recently (2022) I've noticed that the iPad prompt to "Trust this Computer" won't appear unless using an Apple USB-C cable. Apple reps assure me they aren't doing any funny business here, but I have tried every cable I can find, including several thunderbolt 3 and 4 cables and Anker cables. Worth trying an Apple cable if still having problems.
Just simple, close the project on your XCode. Just right-click on the XCode in the taskbar and give a quit option. After open the XCode from the directory, it will detect your device. It also work on Xcode version 11.2.1
close your project or XCode.
Give Right click on the Xcode in MAC tabbar and give the Quit option.
Reopen the project from your finder(project place).
The device will be automatically detected.
Open the Windows in Xcode, go to devices. If Device is visible in Left side, Right click and select "Show in Destination Menu".
Enjoy..
I installed iOS 4.2 on my 2nd-generation iPod Touch last week. I tried running my application on the device through Xcode, but it didn't work (because Xcode didn't yet support iOS 4). To solve that, I installed Xcode 3.2.5 and the iOS SDK 4.2. Now I can get the app to run in the iPhone/iPad Simulator just fine.
However, I can no longer select "Device" from the menu at the top of the screen. It's a choice, but when I try to click on it, it never actually gets a check mark.
Because of this, I can no longer run the app on my iPod. The other (related) problem is that I can't choose "Build and Archive" from the Build menu anymore because the target is not a device.
Why is this happening? Do I need to change some settings in my project, or something with my device itself?
EDIT: Upon closer investigation, it appears that I can't select anything but the iPhone Simulator 4.0. Maybe there's something wrong with the project file.
Check that the base SDK is set to Latest iOS (currently set to iOS 4.2) for your Xcode project and your target's product, then perform a rebuild and see if your iPod is recognized.
Also try visiting the Xcode Organizer and see if it's asking for anything from your iPod. Typically Xcode will want to collect some data from devices whose OS receive updates, so it can update itself and install your apps on the updated OS properly.