I'm having problems with something which seems like an easy task, and most probably a stupid question. It will probably be my all time low experience in programming but I would really appreciate any help!
I'm using Galleriffic to display my portfolio site, and I am looking for a way to directly link to an image+description not being the first in the gallery. I would like it to link from other webpages, or from plain text/pdf documents.
In short, I would like it to link to a webaddress of slide 5 with something like:
Slide 5
but doing it this way obviously doesn't work.
Although others have tried to explain:
https://stackoverflow.com/a/7910501/1074297
jquery cycle link from external page to specific slide?
I can not seem to accomplish it, and it does not help at all that I am not a programmer.
not sure if it is too late, have been search the solutions for whole day, final found out the example 4 in the official website actually make the #link show on the address....so you can actually link the specific image ('slide'') from external page...amazing!!!!!
check this out
http://www.twospy.com/galleriffic/example-4.html#5
You can find the script after all the or just before ... and place it to your template...it works well for me, hope it helps, good luck
Related
I have a joomla site and would like to integrate some old unfinished webcomics to it, so I can pick them up where I stopped in a CMS that won't leave me in an absolute frothing rage (thanks, wordpress).
I've got some experience with Joomla and I believe it would be a pretty good platform for managing multiple comics... except for the small issue of horrid navigation between pages/articles. Joomla's integrated article navigation is a humble but passable start, but if you intend to use categories to organize chapters then getting from the end of one to the beginning of the next is... yeah. This is a pity, as Joomla's category and article management options are beautiful for archiving and presentation, and adding gantry 5 to it means a great deal of control over the reading experience. Basically, joomla has pretty much everything I want, except for the navigation.
Ideally, what I'd like to be able to accomplish for comic navigation in joomla is:
Clickable full-article-image leading to next article/page
Prev/next article buttons (already available)
Prev/next category buttons (do we have those?)
The latter two in a module I can choose where to publish (optional)
And this is it, basically. I understand that implementing the first could be very hard without some major template customization, in which case I'd be willing to insert the image as a link in the article body... but only if there was one single code I could use, like the one that generates the next category article button. Because I'm not willing to create hundreds of menu items to generate links page-by-page.
So is any of this doable?
This is a quick answer but too much for a comment. I'm assuming since you are on SO that you don't mind coding (as opposed to just configuring).
I think you need to do two things. First you need to create a pagination.php for your template. This will let you really super control what the pagination looks like. You can have images, special css and js, whatever you want. You can also add the "last" and "first" options.
I think you need to make a new plugin to replace the core pagenavigation plugin and that also generates the previous/next category links. (Or I guess you could make one just to do categorynavigation depending on what you want.) HOWEVER, it seems to me that there is data on the sibling links that is already being generated in the content category model so you might be able to use that. (Check the code; I think there was never a UI for it, but it is there. Even if it isn't there, siblings are very easy to obtain in nested sets)
The other thing you can really think about if you go that route is changing the whole thing somewhat to use a module that gets the current ID and category ID from JInput. You might also be able to use JPagination. The important thing, however is that you make sure to do the caching the way the pagination that is there does it. In other words you really want to cache the whole list in the order you want so you are not running so many queries and slowing your site down. You may want to look at the categories and category modules to get some ideas about the queries to do.
Hope that gets you started, but it is definitely something you can do without too much trouble.
The scenario:
I'm on the Startpage of my Blog, and there is an Article with its post-thumbnail. When I click on the Header or the "…read more-link I get to the post.
My question:
Is it possible to set the image bigger when you're on the single-post-page? Furthermore I would like to understand how to set this post-thumbnail-difference up.
I hope you've understood my bad english :) I'm looking forward in receiving help from you guys.
Best regards
Morten
Update:
Here two Screenshots of the Scenario:
Startpage > http://s1.directupload.net/images/130517/ltxuxyj6.png
Singlepost > http://s1.directupload.net/images/130517/lap5re2j.png
The images belongs to me (© Morten Sassi)
I think it depends on the theme you're using : on mine, thumbnail isn't used for the startpage but it use the "featured image", and once on the page of the article I just add the image directly in the body of the article with the size I want.
Maybe you can have a look to your template code and either edit it (but if you're using a theme you didn't create and you update it later your modifications will be deleted) or create a child theme (better solution) to edit only the files you want.
Hope this will help ^^
The best & easy tricky way is uplod your image from media, copy the path and paste this on your post or page editor from backend..and you will get what you want.
Thanks
anand
I'm fairly new to Share Point so forgive me if this is to easy for you guys, but I could not seem to find the answer anywhere and I am rather stumped.
I am currently trying to make a website to track if particular tasks go over their due date. I have a calculated column that leaves a DIV tag to the image of a red/yellow/green circle which is displayed by the javascript for a Content Editor Web Part (CEWP) made by Christophe on his site here:
http://blog.pathtosharepoint.com/2008/09/01/using-calculated-columns-to-write-html/
I was able to put his code into the CEWP and everything looks great when it is in a standard list.
But I want a web part version of this on the homepage for easy view. When I make the web part (of a view grouping by the image tag) and place on the main site all I see is the DIV tag! I made sure to put an identical CEWP on the homepage as well but i get as grouping:
+[columnName] : DIV>img title=blahblahblah>/DIV> (2)
Needles to say when I expand this it stays the same for all entries below
Any Ideas?
Thanks for your time :D
Nobody has responded, but I found the answer so hopefully this will save someone the hours of grief I had. This will seem ridiculous but just go with it.
In the calculated column instead of returning the type as text, return it as a currency. Sounds ridiculous BUT IT WORKS!!
Does anyone know where I could find a FREE module that displays articles along with images on multiple columns like here http://raxo.org/demo.html ?
I've been on this for a few days now, I just know there is something out there..
Thanks!
Try Gavick News Show Pro. http://tools.gavick.com/newshowpro.html
Eventually, back then, I edited the template myself. Couldn't find a module that did exactly what I wanted.
I found it very hard to customize PDF invoice that Magento use. Not only hard to customize, but my client does not like it as well.
Is it possible to disable PDF invoice and use HTML invoice?
I googled it, but found nothing.
There are three real options here to get better invoices:
Write a better invoice system that
still uses PDFs. I've done this for
a client, it takes a long time. Unfortunately, there is no really good way to change the PDFs that Magento generates by default.
Replace the controller/action that
generate the PDFs with ones that
will simply output HTML.
Same as above, but override the
mass-action dropdown to contain your
new entries. This is probably the
easiest, and you can add more
reports while you're at it. Take a
look at
Mage_Adminhtml_Block_Sales_Order_Grid,
specifically _prepareMassaction
Hope that helps.
Thanks,
Joe
http://ext4mage.com/html2pdf-magento-extension.html#
grateful, grateful
But I find it a shame that magento does not have thi in core