I can't find how to install gdcm, from sources, in Xubuntu. I've downloaded tha latest snapshot from gdcm, version 2.2.0.
http://sourceforge.net/projects/gdcm/files/gdcm%202.x/GDCM%202.2.0/
It contains four folders:
bin
include
lib
share
Following official instructions here
http://sourceforge.net/apps/mediawiki/gdcm/index.php?title=Compilation#GNU.2FLinux
It says I should do this:
$ sudo apt-get install cmake g++
$ mkdir gdcm-build
$ cmake ../gdcm
$ make
But with the cmake command I get:
CMake Error: The source directory "" does not appear to
contain CMakeLists.txt.
I don't know what to do.
Thanks in advance.
Related
When I try to install Sphinx with this guide
./configure --with-pgsql --with-mysql #from guide
make #from guide
sudo make install #from guide
./configure
-bash: ./configure: No such file or directory
$ autoreconf --install
autoreconf: 'configure.ac' or 'configure.in' is required
Are you running the ./configure command within the Sphinx source code folder? These instructions are for compiling Sphinx.
It's worth noting that the latest (v3.x) Sphinx releases aren't available as source code, only as pre-compiled binaries. So if that's what you've downloaded, you'll want to copy the files in ./bin - which would include indexer and searchd - into a location within your PATH (I would suggest /usr/local/bin).
Not excellent solution (because without mysql), but working (as all in programming world).
1) brew remove mysql
2) brew install mysql#5.7 (I don't know why, but it is working only with this version)
3) download sphinxsearch.com/files/sphinx-2.2.11-release.tar.gz and extract and cd to it
4) ./configure --with-pgsql --without-mysql and make and sudo make install
It is working for me, because I need postgresql first of all
I'm trying to compile linphone on mountain lion. I have downloaded the sources and followed all the instructions in the README.macos file. The first time, when I got to '$ port install ige-mac-integration' an error occurred. It said gtk2 had to be installed with x11, however, the instructions said to install it with quartz and no_x11. I tried installing gtk2 again, this time with x11, but when I get to the compiling process it tells me quartz is needed. I can't install both, because the gtk2 installation will complain about it, and it seems I need both to complete the entire process of installing and compiling linphone.
I have tried these steps with the downloadable sources, as well as the git sources, both gave me the same problems. Linphone does not have a forum, so I couldn't ask it on their site.
I just need to get the sources and start using them, so any recommendations on how to open the linphone source, edit it, and compile/run it would be very welcome. The ideal situation would be where I can just open an xcode project file.
This is the readme file:
**********************************
* Compiling linphone on macos X *
**********************************
You need:
- Xcode (download from apple or using appstore application)
- Macports: http://www.macports.org/
Download and install macports using its user friendly installer.
- Install build time dependencies
$ port install automake autoconf libtool intltool
- Install some linphone dependencies with macports
$ port install speex
$ port install libosip2 # WARNING: currently outdated in macport
$ port install libeXosip2 #WARNING: currently outdated in macport
$ port install ffmpeg-devel
$ port install libvpx
- Install srtp (optional) for call encryption
$ port install srtp
If that fails, get from source:
$ git clone git://git.linphone.org/srtp.git
$ cd srtp && autoconf && ./configure --prefix=/opt/local && make libsrtp.a
$ sudo make install
- Install zrtpcpp (optional), for unbreakable call encryption
$ port install cmake
$ git clone git://git.linphone.org/zrtpcpp.git
$ cd zrtpcpp && cmake -Denable_ccrtp=false . && make
$ sudo make install
- Install gtk. It is recommended to use the quartz backend for better integration.
$ port install gtk2 +quartz +no_x11
$ port install hicolor-icon-theme
- Compile and install the tunnelsu
If you got the source code from git, run ./autogen.sh first
Then or otherwise, do:
$ ./configure --prefix=/opt/local && make && sudo make install
- Compile linphone
If you got the source code from git, run ./autogen.sh first.
Then or otherwise, do:
$ ./configure --prefix=/opt/local --with-readline=/opt/local --disable-strict --disable-x11 --with-srtp=/opt/local --with-gsm=/opt/local --enable-zrtp && make
Install to /opt/local
$ sudo make install
Done.
If you want to generate a portable bundle, then install gtk-mac-bundler.
Use git:
$ git clone https://github.com/jralls/gtk-mac-bundler.git
$ cd gtk-mac-bundler && make install
$ export PATH=$PATH:~/.local/bin
#make this dummy charset.alias file for the bundler to be happy:
$ sudo touch touch /opt/local/lib/charset.alias
Then run, inside linphone source tree:
1. Run configure as told before but with "--enable-relativeprefix" appended.
$ make
$ make bundle
The resulting bundle is located in linphone build directory, together with a zipped version.
For a better appearance, you can install the gtk-quartz-engine (a gtk theme) that make gtk application more similar to other mac applications (but not perfect).
$ git clone https://github.com/jralls/gtk-quartz-engine.git
$ cd gtk-quartz-engine
$ autoreconf -i
$ ./configure --prefix=/opt/local && make
$ sudo make install
Generate a new bundle to have it included.
Below is the details to configure the dependencies and build linphone.
==============================================================
Step: 1:- Dependency configuration:
I just followed the instruction which is available in "README.macos" upto sqlite3 configuration. I had some problem with dependancies configuration.
Because of macport version, srtp configuration is failed. So I have downloaded "MacPorts-2.1.3-10.8-MountainLion.pkg" and installed manually.
Because of GTK version, libsoup is failed. So I have downloaded "GTK_2.18.5-X11.pkg" and installed manually.
After the manual installation, I have followed "README.macos" again for reconfiguration.
NOTE: Sometime terminal won't recognize "wget".
--> Solution: just execute below command.
echo 'alias wget="curl -O"' >> ~/.bash_profile
Step: 2:- Compile and Install:
I got some problem related to intltool while compiling.
Solution: just I set the path by executing below commands
export PATH=$PATH:/opt/local/bin
export MANPATH=$MANPATH:/opt/local/share/man
export INFOPATH=$INFOPATH:/opt/local/share/info
Now it is successfully compiled and installed.
Step: 3:- Creating bundle to run the app:
Just I followed below commands to make the build.
If you want to generate a portable bundle, then install gtk-mac-bundler.
Use git:
$ git clone https://github.com/jralls/gtk-mac-bundler.git
$ cd gtk-mac-bundler && make install
$ export PATH=$PATH:~/.local/bin
#make this dummy charset.alias file for the bundler to be happy:
$ sudo touch touch /opt/local/lib/charset.alias
Then run, inside linphone source tree:
1. Run configure as told before but with "--enable-relativeprefix" appended.
$ make
$ make bundle
It will create "linphone.app" file in current linphone directory. It will support only for "Mountain Lion".
Step: 4:- Support for lower version: (e.g.: Lion, Snow Leopard...)
We have to configure "libiconv hack" to supporting for lower version
I think it will help you.
I wrote an answer here. It's a bit long but I sincerely hope it is clear enough and will help you.
It contains the build settings and other libs you need to include.
Cool stuff I didn't need to run the make :)
Best,
I am trying to install Apache (by compilation)on my mac Lion.
Every time, I try to compile pcre, I get these two errors :
configure: error: pcre-config for libpcre not found. PCRE is required and available from http://pcre.org/
or
"Did not find prce-config script at"
I know I have this pcre-config file.
(I put http-2.4.1 and pcre-8.30 in Documents / Tried another location in MyUsername/Test/ >> same result >> it didn't work either).
Any help would be greatly appreciated.
Thanks.
Edit :
I copied http-2.4.1 and pcre-8.30 in "/"
then I cded to /pcre-8.30
then I issued ./configure >> Got no error.
then I cded /http-2.4.1
then I issued ./configure --prefix=/usr/local/apache_2.2. --with-pcre=/pcre-8.30
Got 1 error configure: error: Did not find pcre-config script at /pcre-8.30
I do not understand what "Install prefix .................. : /usr/local" means (in the pcre-8.30 configuration summary). I can't see any pcre file in this directory.
I got apache 2.4.1 to configure by doing the following (note i am running lion v 10.7.3)
I downloaded pcre and ran (Note: by default pcre will install into /usr/local)
$ ./configure
$ make
$ make install
setup httpd-2.4.1 with the following command
$./configure --prefix=/usr/local --with-pcre=/usr/local
$ make
$ make install
Test
$ usr/local/bin/apachectl start
This appeared to work for me hopefully it works for you
You can also install Homebrew from http://mxcl.github.com/homebrew/, and then
brew install pcre
It does not need root access.
And then run the ./configure.
Maybe you not install PCRE correctly. Please try this:
Install PCRE
Nginx requires PCRE – Perl Compatible Regular Expressions to build, I used PCRE version 8.13. In a Terminal, run:
sudo curl -OL h ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.13.tar.gz > /usr/local/src/pcre-8.13.tar.gz
sudo mkdir -p /usr/local/src
cd /usr/local/src
tar xvzf pcre-8.13.tar.gz
cd pcre-8.13
./configure --prefix=/usr/local
make
sudo make install
cd ..
That is what I am trying...
I still couldn't get it to work using jfleong's answer. I came across fink, which you can download here http://www.finkproject.org/download/srcdist.php
After it was all installed, I ran:
$ fink install pcre
And then continued with installing apache and just using
$ ./configure
Without any flags. After I did all of that it finally was able to finish installing. Hope this helps!
I tried to install sphinx on my Mac (OSX 10.6.7) but at the first installation step, I run into a problem.
According to the installation doku, http://sphinxsearch.com/docs/current.html#installation, one should do the following steps
$ ./configure
$ make
$ install
When I enter ./configure in my terminal, I get the following error message:
$ ./configure
> -bash: ./configure: No such file or directory
So I looked in the folder 'sphinx-2.0.1-beta-osx10.6-i386' and saw that there's no such file such as configure. Also
$ ls -a
> . api doc sphinx-min.conf.in
.. bin example.sql sphinx.conf.in
COPYING contrib log
INSTALL data sphinx-min.conf
When I tried other files such as sphinx-min.conf, I get
$ ./sphinx-min.conf
$ -bash: ./sphinx-min.conf: Permission denied
Also the sudo ./sphinx-min.conf doesn't work
$ sudo ./sphinx-min.conf
$ sudo: ./sphinx-min.conf: command not found
Any ideas?
It seems possible that you have downloaded a binary version, rather than the source code. You should check for binaries in the subdirectory bin.
You should also read the file INSTALL, which probably has installation instructions that go with the distribution you have downloaded.
You should download Source tarball (tar.gz) from http://sphinxsearch.com/downloads/release/ even it has the deceptive linux-penguin icon. After decompression the tarball you can follow the installation steps as http://pat.github.com/ts/en/installing_sphinx.html says.
Trying to follow the directions from: http://github.com/zeromq/jzmq
I installed pkg-config using Homebrew and then I run the following commands:
./autogen.sh
./configure
The configure fails with:
checking how to hardcode library paths into programs... immediate
./configure: line 15263: syntax error near unexpected token `newline'
./configure: line 15263: ` PKG_CHECK_MODULES('
A better solution is:
eval `brew --config | grep HOMEBREW_PREFIX | sed 's/: /=/'`
sudo bash -c 'echo '$HOMEBREW_PREFIX/share/aclocal' >> `aclocal --print-ac-dir`/dirlist'
This will allow the version of aclocal that ships with OSX to find any macros installed by homebrew packages.
With homebrew, the key is the warning message:
~/code/foss/java/jzmq$ brew install pkg-config
==> Downloading http://pkg-config.freedesktop.org/releases/pkg-config-0.25.tar.gz
==> ./configure --disable-debug --prefix=/usr/local/Cellar/pkg-config/0.25 --with-pc-path=/usr/local/lib/pkgconfig:/usr/lib/pkgconfig:/usr/X11/lib/pkgconfig
==> make install
Warning: m4 macros were installed to "share/aclocal".
Homebrew does not append "/usr/local/share/aclocal"
to "/usr/share/aclocal/dirlist". If an autoconf script you use
requires these m4 macros, you'll need to add this path manually.
==> Summary
/usr/local/Cellar/pkg-config/0.25: 8 files, 232K, built in 19 seconds
If you look at /usr/local/Cellar/pkg-config/0.25/share/aclocal/, you will see:
$ ls /usr/local/Cellar/pkg-config/0.25/share/aclocal/
pkg.m4
You need to append /usr/local/Cellar/pkg-config/0.25/share/aclocal/ to /usr/share/aclocal/dirlist,like this:
$ cat /usr/share/aclocal/dirlist
/usr/local/share/aclocal
/usr/local/Cellar/pkg-config/0.25/share/aclocal/
And then re-run autogen and the other steps.
I made a simple list about jzmq building for MacOS.
Install brew
https://brew.sh
Install tools for jzmq building
brew install autoconf
brew install automake
brew install libtool
brew install pkg-config
brew install zeromq#3.2
Download jzmq source
https://github.com/zeromq/jzmq source download to ~/somewhere/jzmq
Add symbolic link to /usr/local/include
cd /usr/local/include
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/include/zmq.h
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/include/zmq_utils.h
Add symbolic linke to /usr/local/lib
cd /usr/local/lib
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/libzmq.3.dylib
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/libzmq.a
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/libmq.dylib
ln -s /usr/local/Cellar/zeromq\#3.2/3.2.5/lib/pkgconfig/
Build jzmq-jni
cd ~/somewhere/jzmq
cd jzmq-jni
./autogen.sh
./configure
make
make install
Add option to VM options
VM options -Djava.library.path=/usr/local/lib
From the zeromq mailing list:
Building 0MQ from the development
trunk on a UNIX style OS (Linux, OS X)
requires that pkg-config
(http://pkg-config.freedesktop.org/wiki/)
be installed. A regular source build
of 0MQ does not require pkg-config.
On Mac OS X, pkg-config does not come
with the system, so when you try to do
./configure you may see errors like:
./configure: line 23913: syntax error near unexpected token `GLIB,'
./configure: line 23913: `PKG_CHECK_MODULES(GLIB, glib-2.0 gthread-2.0)'
To resolve this, you need to install
the latest pkg-config:
tar xzf pkg-config-0.25.tar.gz
cd pkg-config-0.25
./configure --prefix=/usr/local/pkg-config-0.25 --datarootdir=/usr/share
make
sudo make install
Then you will need to put
/usr/local/pkg-config-0.25/bin on your
$PATH. It is important to include the
"--datarootdir=/usr/share" option,
which will install the pkg.m4 file in
/usr/share/aclocal, where aclocal will
be able to find it.
Then you can build 0MQ:
cd zeromq2
./autogen.sh # must do this again after installing pkg-config
./configure # add other options here
make
sudo make install
Edited to reflect latest pkg-config version (0.25).
I came here with the same question, and I don't feel this is answered. I also installed ZeroMQ and pkg-config via Homebrew. /usr/local/share/aclocal/pkg.m4 exists and comes from pkg-config 0.25. It seems that Homebrew has satisfied the requirements listed but it still fails.
Trying to compile jzmq on Mac OS X, proved to be a bit of a headache. I followed the instructions above. I was still getting following error
syntax error near unexpected token
`PKG_CHECK_MODULES
The instructions above tell you to copy the pkgk.m4 file into /usr/share/aclocal, but your directory might be different. Basically you need the dir that automake searches for macro definitions.
The _PKG_CHECK_MODULES_ macro is defined in the pkg.m4 file. This file must be installed in the appropriate directory, which is searched by automake. Somehow automake is installed twice on my OS X, one in /usr and another in /Developer/usr. Make sure you know which one it's using. Just do which automake. If yours in is /Developer/usr, then copy the pkg.m4 file to /Developer/usr/share/aclocal.
For me, the problem was that I didn't have pkg-config installed.
On Osx Mountain Lion I don't have the dirlist file as Phil Calçado said, but a simple symlink from /usr/local/Cellar/pkg-config/[version]/share/aclocal/pkg.m4 to /usr/share/aclocal made the trick and now jzmq build fine.