Sorry, Google hasnt been very helpful.
I have a Word Document which references jpeg pictures stored at a different path.
I always instruct word to Link in the file and modify the field code as:
{INCLUDEPICTURE \d"..\\Relative Path\\To\\MyPicture.jpg" }
For some inexplicable reason, if either the picture content changes or if the document is closed and opened several times, the field code is getting updated automatically.
{INCLUDEPICTURE \d"c:\FULL Path\\To\\MyPicture.jpg" \* MERGEFORMATINET }
How do I ensure that the field code remains intact no matter what I do?
I came across this issue too.
I fixed this by using .dot instead of .dotx.
For some reason the newer format is changing the link.
Not a solution, but it is a workaround
Hope it helps
Related
I'm an ABAP programmer and I was asked to make a minor modification to an IPL label.
Easily done, but now I was tasked to fix a long running error within said label.
I know nothing about IPL and the lack of a online viewer makes everything worse...
The problem is that "tabulation" right in the middle of a text (I underlined it in blue on the Label's pic).
I checked the code and there's nothing there that should make that tabulation appear.
I spent a whole month reading manuals and trying to fix it, but nothing changes...
Here's the code and the resulting label:
<STX>R<ETX>
<STX><ESC>C<SI>W791<SI>h<ETX>
<STX><ESC>P<ETX>
<STX>F*<ETX>
<STX>H1;f3;o220,52;c34;b0;h2;w1;d3,300052947-FANDANGOS PRESUNTO 140GX14 LD<ETX>
<STX>H2;f3;o130,52;c33;b0;h1;w1;d3,Val:<ETX>
<STX>H3;f3;o130,204;c34;b0;h1;w1;d3,QTD.Unidade:<ETX>
<STX>H4;f3;o90,33;c34;b0;h0;w1;d3,16/08/21<ETX>
<STX>H5;f3;o90,302;c34;b0;h1;w1;d3,14<ETX>
<STX>B6;f3;o375,44;c2,0;w6;h102;r0;d3,17892840816329<ETX>
<STX>H7;f3;o275,44;c26;b0;h17;w17;d3,17892840816329<ETX>
<STX>H8;f3;o130,490;c34;b0;h0;w1;d3,Lote:<ETX>
<STX>B9;f3;o090,600;c2,0;w2;h45;r0;d3,0005218177<ETX>
<STX>H10;f3;o130,600;c34;b0;h0;w1;d3,0005218177<ETX>
<STX>D0<ETX>
<STX>R<ETX>
<STX><SI>l13<ETX>
<STX><ESC>E*,1<CAN><ETX>
<STX><RS>1000<US>1<ETB><ETX>
Label
Can you guys help me, please??
Edit: Just to make it clear, I did that blue line on that image to show what's the problem.
Here are some tests I did by changing the data:
Test1
Test2
The error always appear at the same point in the label, as long as there's a space in that text.
Have you looked at the raw data of the output? Is it POSSIBLE that what looks like a space is actually some special character that is making IPL choke blue? Because it is literally the 1 character between the "O" and "1". For grins, you might also try to change the character in the data to a "-" just for purposes of confirming data context. It might even just be a TAB character.
I have done IPL years ago and have actually gone to the point of defining a pre-defined label template and generating output that says to use template X (whatever # I created as),and pass the data along that fills into the respective fields.
A final option I would throw in is this. Take the sample output you have and just force sample data into each of the output areas. So, instead of your literal data, put fake data in similar context just to see if it is data specific or other. Such as
<STX>H1;f3;o220,52;c34;b0;h2;w1;d3,300052947-FANDANGOS PRESUNTO 140GX14 LD<ETX>
becomes
<STX>H1;f3;o220,52;c34;b0;h2;w1;d3,123456789-TESTING-SAMPLEDATA-123XY12-AB<ETX>
Notice same context of data, but no spaces and using dash "-" just for testing. Is there something special about the actual data. This is a good way I have done historically for similar strangeness early on doing IPL labels.
User decided to not spend anymore time on this issue, so now I'm unable to further test the label.
Unfortunately this problem will go unsolved for now. Hope I get another chance to fix this and learn more about IPL.
Thanks you so much for your answers!
Whenever I try to upload my dataset to the AutoML Natural Language Web UI, I get the error
Something is wrong, please try again.
The documentation is not very insightful about how my CSV file is supposed to look, but I tried to make a simple sample file just to make sure it works at all, it looks like this:
text,label
asdf,cat
asodlkao,dog
asdkasdsadksafask,cat
waewq23,cat
dads,cat
saiodjas,cat
skdoaskdoas,dog
hgfkgizk,dog
fzdrgbfd,cat
otiujrhzgf,cat
vchztzr,dog
aksodkasodks,dog
sderftz,dog
dsoakd,dog
qweqweqw,cat
asdqweqe,cat
dkawosdkaodk,dog
ewqeweq,cat
fdsffds,dog
bvcghh,cat
rthnghtd,dog
sdkosadkasodk,cat
sdjidghdfig,cat
kfodskdsof,dog
saodsadok,dog
ksaodksaod,dog
vncvb,cat
I chose this formatting according to the Google suggested Syntax
But even with this formatting I still get the same error
I've seen this question Format of the input dataset for Google AutoML Natural Language multi-label text classification but according to the answers there it seems my formatting should work, so I do not know why I get the error
I've just copied the CSV file and uploaded it to my own project and the dataset created worked. One problem is that an extra label was created "label" - this is because the header is not expected to be in the csv file (probably this should get fixed).
Based on that it seems the problem isn't the CSV file format. I would recommend to check if your project is setup correctly. You can open a bug to get someones help. Either you can open a bug in public issue tracker or send feedback using the UI (there is 'Feedback' option in the menu on top right side of the page).
I have found the problem! As Michal K said, there was nothing wrong with the formatting, the real problem was I was not assigned the role of Storage Object Creator, which is necessary because the Data is uploaded in Cloud Storage first
I understand that there is definitely something wrong with my report (e.g. columns missmatcch) and I need to correct it but what I see is the WCF error message that hides actual problem and exactly this hiding irritates me much more than original problem: columns missmatch.
I guess we need to adjust the WCF 'buffer size' and we will get original problem message. But where is the config file?
Text search of "system.serviceModel" in the C:\Program Files (x86)\Microsoft Visual Studio 10.0 doesn't bring good idea...
P.S. Since this is just preview of report I do not think that it is SSRS configuration problem. Problem localised somewhere in DevStudio process or int the DevStudio's internal web server process ...
P.P.S Please help me too improve the question. I see that responders doesn't understand what kind of help I need.
I have encountered multiple "flavors" of this bug in SSRS Preview. It seems the renderer for Preview mode is quite fragile.
There is a simple way to solve this. Ignore the error and attempt to upload the RDL file to your reporting server. The uploader will happily tell you exactly what is wrong with your file - it will tell you exactly what field has a problem and what that problem is. If there are multiple errors, you will get told each and every field and the error associated with each one.
I can create this bogus XML buffer error with any of the following:
Add a new Tablix, start to connect it to a dataset, then cancel out.
Copy/paste some text into a textbox from a MS Word document where one or more lines have a negative right indent (right column end is outside page margin).
Connect a dataset with a varchar(8000) returned value.
Please Check if any of your report items are referencing fields that are not in existing dataset scope.
This indeed worked for me.
See Below link for more information:
http://connect.microsoft.com/SQLServer/feedback/details/742913/ssdt-reporting-services-designer-error
I have seen this error when adding a new field to an existing dataset by clicking "Refresh Fields".
The dataset source was a stored procedure. The result was only a few of original fields showed up in the dataset field list and not the new field. If I tried to preview the report I get XML buffer error.
Workaround was to not refresh fields but hit add new field and type the new field name into the dataset properties field last.
Worked fine after that.
I got this error again today.
I had created a table to hold data to replace two slow queries. I changed some names to clean up the process.
I think the error actually means that there are so many problems with my report that the buffer holding the various error messages isn't large enough which leads to the error message.
The size necessary to buffer the XML content exceeded the buffer quota
Of course this should be an easy fix but Microsoft has said that they will not fix it.
https://connect.microsoft.com/SQLServer/feedback/details/742913/ssdt-reporting-services-designer-error
EDIT: I've updated my answer based on having fixed the issue.
I'm currently experiencing this problem after having changed multiple stored procedures and updating the dataset names in the SSRS report.
And when I try to run the preview I get the exact same error.
As it turns out, after investigating the issue, the problem was that I had changed the name property of my datasets.
There several places in my report where formulas or expressions use the old name properties of the datasets I renamed. After reverting the dataset names back, I managed to get the real errors like missing fields etc. atcual errors came back after I set my dataset name properties back to what they were.
I only changed the name property back to what it was, the stored procedure names were correctly referring to my renamed stored procedures.
I had this problem when after copying and pasting a tablix, it changed CDbl in a formula to Microsoft.ReportingServices.RdlObjectModel.ExpressionParser.VBFunctions.CDbl. I opened up the XML and removed all instances of "Microsoft.ReportingServices.RdlObjectModel.ExpressionParser.VBFunctions." and the report then worked.
For a working report, when I tried to add a column it gave me this error. I edited the .rdl file using notepad++. After SSRS prompt to reload the change from disk, it worked without issues.
I got this error after copying my Custom Code to Visual Studio for hightlighting the code for better readability. Well, Visual Studio added class definitions to the beginning and end of the file. After editing code, I pasted it back to report Custom Code, then got this error. Fix was just to remove class definitions (Public Class Class1 and End Class) from Custom Code. So, check your Custom Code also (if any).
I got this error after adding some new parameters to an existing report.
For some reason when I created the parameters first then modified the Dataset to use the new parameters I got the error, but when I modified the Dataset first then added the parameters second and I did not get the error.
This seemed like very strange behavior to me so I tested it by restoring the report from repository and repeating the process three times with each method, and had identical behavior every time.
I am also facing this problem. I solve this Find and replace
Microsoft.VisualBasic.Interaction.iif ==> iif
Microsoft.ReportingServices.RdlObjectModel.ExpressionParser.VBFunctions.cdbl
==> cdbl
I hope this may helps someone. Thanks
Possible root causes
Parameter name is incorrect(case/order)
Accessing non-existing property.
and many more...
Solution: To get the exact error message are
Deploy SSRS report and find the error : Suggested by "Kim Crosser" already
Remove the section(SSRS/Report content) temporarily you feel is error free to free space in buffer so that you can get actual error message. Later add sections back to the page(removed earlier).
I had the same error message and it was totally caused by my doing. It's a bit embarrassing, but if it helps someone out then great! I had accidentally copied my dataset query that included a small sub select statement within it, which I was using to check parameter/variable values.
Another solution is to open the .rdl file in Report Builder 3.0 (as opposed to Visual Studio) and try to preview it. I found this gave me the details of the error, although if more than one error is present it only shows the first.
I previously binded a TextBox to
Fields!FieldName
and fixed it with
Fields!FieldName.Value
With that said, and with the other answers posted as well, this error happens in different flavors. My issue was fixed after I had the field property "Value" included.
I have the following problem:
I want to avoid that one field of the copied row gets copied into the new row. (ME51n)
I thought that I could search somewhere in the debugger for this field name.
Example:
first row has the MATNR: 100-1-15
now i want to search in the debugger for the field MATNR. Is this possible?
(I know this example does not make sense, but my field is not used that often because it's an self-created field)
Or is there an user-exit especially for that?
Use watchpoints for that particular aim that you stated. In official documentation you can learn how to do it. The problem of finding suitable user-exit is not related to original question.
I am having difficulty coaxing the "Help → Search" function of my application to show topics related to the useful (and unique) keywords in my application. Only one keyword shows up.
Background: I created several html help pages (examples: index, accuracy, convert) in a subdirectory of my program. If I invoke the master help, the index.html file shows up fine. From there, I can click through to any of the other topic pages.
Problem: If I try using the keyword search function, only "Accuracy" and a blank indicator (that pulls up the index.html) show up. I have other keywords like "coordinates" that should point to a specific page, but aren't showing up.
What I've done so far: In addition to re-skimming the documentation (which at this time, I am a little bleary-eyed), I have run each page through BBEdit's syntax checker. I also searched StackOverflow for information related to the problem. Because the keywords are rather ubiquitous, this was the primary topical match, but I'm well-past that.
The Help Indexer log notes that it's indexed all of the html files, finding KEYWORDS and DESCRIPTION meta tags in each (as recommended by the Help Book):
droot.html -- File has KEYWORDS meta tag content being indexed.
gc.html -- File has KEYWORDS meta tag content being indexed.
index.html -- File has KEYWORDS meta tag content being indexed.
droot.html -- File has DESCRIPTION meta tag used for abstract.
gc.html -- File has DESCRIPTION meta tag used for abstract.
index.html -- Finished parsing
droot.html -- Finished parsing
gc.html -- Finished parsing
(etc)
The *.helpindex file in the Release package (?/Contents/Resources/MacFizzyCalcHelp/ directory) is ~25k. I do not know how to inspect its contents, though.
Any thoughts on what I'm missing?
I found the following post on the Apple Support site useful when I ran into a similar problem with the Help topics of my Helpbook not appearing using the Search functions:
https://discussions.apple.com/thread/3442044
There are many reasons of problems. Once I found that apple developer documentation has a mistake (in describing anchors). Did you register help book in application Info.plist? Does help book contains own info plist file? You can check helpindex file using hiutil. I hope this help you.
I just had the issue of the blank Apple help entry and after several days of trying everything I could think of, finally found the solution. Add META NAME="ROBOTS" CONTENT="NOINDEX" to the blank entry's page (in my case it was index.html, aka the landing page or access page). I then re-indexed the HTML pages and lo, no more blank entry. No need to even delete the help viewer cache.
[Edited as tags hid content :-]