how to download IE for mac and to install - macos

i want to use internet explorer on my mac, is there any way to install.
i need it as there are some websites which can open only in internet explorer, its a loss for me that i cant open websites on this safari
kindly help me if any one knows or using IE.
do you have any idea about virtualbox. is this help to download IE for mac
http://news.softpedia.com/news/How-to-Run-Internet-Explorer-on-Mac-OS-X-391323.shtml
above link shows how todownload virtualbox and to install it
thanks

I find that the ievms project that is referred to in the softpedia link you provided is pretty quick and painless to setup on OSX. Once you have installed VirtualBox it will download and install the image for you automatically.
Note that it seems like you only need one IE version (and not all of them) so make sure you specify a version to download in the curl command, for example to install Internet Explorer 8:
curl -s https://raw.github.com/xdissent/ievms/master/ievms.sh | env IEVMS_VERSIONS="8" bash
Just run this command in your Terminal and it will do the rest.
Note: I've put version 8 as an example because it would be quicker to download than newer versions and is probably enough for your usage

Related

Firefox cannot open "libgtk-3.so.0". How to circumvent?

I have two CentOS VMs which use Jenkins to run automated tests through firefox. Both have firefox installed. Both versions of firefox are the same (firefox-56.0.1). I do not know if they are both x86_64 or some other type, but whichever they are, they are the same. (I am using the same .tar.bz2 file. I copied it from one instance to the other.)
In one instance, I am able to run firefox. "firefox --headless" returns "*** You are running in headless mode."
After copying the .tar.bz2 file to the other instance and installing firefox, I find that the new instance does not have the same performance. "firefox --headless" returns the following:
XPCOMGlueLoad error for file /usr/local/firefox/libmozgtk.so:
libgtk-3.so.0: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
What might explain this difference? It appears that I did something right in the first instance, but I cannot tell what. Is there some setting that will prevent firefox from trying to use the "libgtk-3.so.0" file? This file does not exist on either instance.
I've seen this question elsewhere, but the answer seems to focus on versions (I know my version has worked in the first instance) and a particular bug that has been backlogged (this bug only bothers me for the new instance).
Problem solved minutes after asking the question.
Simply run:
yum info gtk3
Check if gtk3 is installed. If not:
yum install gtk3
My old instance had gtk3 version 3.22.10 installed. My new instance had the same available but not installed. I don't recall seeing this in any of the guides to running firefox headlessly, but a search result that I did not originally think worth checking was able to resolve this rather quickly. Credit to the folks at https://forums.fedoraforum.org/showthread.php?310652-Udating-Firefox-fedora-19
For Ubuntu or Debian distros use:
apt-get install packagekit-gtk3-module
You probably installed the wrong firefox version for 32bit on a 64bit system.
try downloading firefox with this portable installer download-mozilla-portable.sh which should work on a 64bit linux (tested in Ubuntu 19.10)

How to install GnuPlot on windows?

A Unix (mac/Linux) user who has been forced to work on a windows machine here :)
I have scripted loads of work in GnuPlot and don't want to switch to other programs at this moment. I would appreciate it if you could help me know how to install GnuPlot On windows (more specifically windows 10). questions:
I know there are two options according to this page, Cygwin and MinGW. which one is better?
I have MinGW installed and I know I need to install one of the options from this page but I don't know which one(s)! and how.
I have searched the internet but it seems most of the search results are for compiling. I don't want to go through compiling and all the hassle.
I tried installing the binary from this link, and when I try to run the program this is the error I get:
Unable to execute file:
C:\Program Files\gnuplot\bin\wgnuplot.exe
CreatProcess failed; Code267.
The directory name is invalid.
I would appreciate it if you could give me a very simple stepwise installation (1 2 3 ...), preferably with visuals, and instructions.
P.S. A nice way to install Free, Libre, and Open Source Software (FLOSS) on Windows and keep them updated, is to use package managers like Chocolatey. There are GnuPlot chocolatey packages here. Just install choco as instructed here. Then use choco install Gnuplot to have the software installed.
You don't have to install MinGW or Cygwin. Actually packages compiled in MinGW are compatible with Windows. Just download the binary of gnuplot from Their repo and you are good to go.
Additional points:
When installing, check which terminals you want to set up; also
check if you want the installer to add the PATH variable to your
system. Also, create a desktop shortcut.
After installation, you should see the desktop shortcut. Clicking on it should open a terminal-based gnuplot (which hopefully you are familiar with).
Please note that I have used the x11 terminal (you can get this working by installing xming). There are other options such as windows and qt terminals, but I am not an expert on using these.
You should have Administrator rights on this machine.
Right click on MinGW, Run as Administrator, install - should be OK.
Good luck!
BR, Alex
You can try
$~ scoop install gnuplot
Installing 'Gnuplot' (5.4.5) [64bit] from main bucket
gp545-win64-mingw.7z (37.7 MB) [=======================================] 100%
Checking hash of gp545-win64-mingw.7z ... ok.
Extracting gp545-win64-mingw.7z ... done.
Linking ~\scoop\apps\Gnuplot\current => ~\scoop\apps\Gnuplot\5.4.5
Creating shim for 'gnuplot'.
Creating shortcut for GNUPlot (wgnuplot.exe)
'Gnuplot' (5.4.5) was installed successfully!

Mac installing libraries using the terminal

I have researched this and found answers on SO on this topic yet remain confused.
Trying to get started with Git. I'm new to shell scripting too so hopefully after this I'll be more familiar with it.
I'm reading this page about how to get up and running with Git: http://git-scm.com/book/en/Getting-Started-Installing-Git
I created a directory on my desktop called "git" and navigated to it in the terminal. With my level of experience in shell scripting this was a victory. Then, following a blog post on how to download fromt he terminal ran this command:
curl -O http://git-scm.com/download
That worked, or at least a new file was added to the "git" directory that I created.
Reading down the instructions one is told that "To install Git, you need to have the following libraries that Git depends on: curl, zlib, openssl, expat, and libiconv"
OK. Um. How? I did read some blog posts and SO answers on how to do this but failed. The first one for example - type zlib and hit enter - command not found? How do I either check if it's already installed or how do I install it? What about the others?
I tried following this blog post: http://www.neuraladvance.com/using-open-source-libraries-on-mac-os-x.html
I typed:
./configure
make
sudo make install
Wasn't even sure what to expect. The first two commands said not found the last one asked me for a password.
I then tried ./configure --help
Was then told "No such file or directory"
Needless to say I don't know what to do next. How do I install the libraries on a Mac using the terminal? curl, zlib, openssl, expat, and libiconv
I'm pretty sure all those libraries are preinstalled on your Mac.
If not, installing Xcode (free on the AppStore) would do the trick.
Xcode actually comes with git (but not the latest version) so if you install Xcode you don't need to install git separately.
To answer your question more generally, you might want to install Homebrew.
It's a command line tool to install software and libraries and it's pretty easy to use.
It's great that you are discovering the shell. You should read some tutorials for beginners. If you like it, you will learn very fast and in a few weeks, you will understand exactly why the command you tried didn't work. Have fun learning!
As Simon suggested you should install Xcode, however the CLI tools are not installed automatically. They must be downloaded through Xcode's, preferences. In Preferences click the Downloads tab then install next to Command Line Tools.
If any of the required tools are not automatically installed with Xcode, Homebrew is a great, easy to use, utility that can install nearly any UNIX or Linux command with the following syntax:
brew install <SomeAppName>
The Homebrew website has easy to follow instructions for setting it up initially. So if anything you need is missing try using that.
In Xcode 5, to download Command Line Tools, choose Open Developer Tool under "Xcode", then More Developer Tools> from the sub Menu. This takes you to an Apple web page - you'll need a Developer username/password to get to the Downloads page.
Choose the right CLT for your system, download and install from the dmg/pkg.

How do I configure RubyMine 5 to edit remote files over SSH

I've got sort of a simple problem, but I can't seem to find any conclusive answers on the web. So, I have Ubuntu Server running in VirtualBox with Ruby and Rails installed.
What I want to do, is edit the files in the VM over SSH using RubyMine 5.0 on the Windows host machine (just like I can in Eclipse).
The problem is I can't find how to do that. I'm pretty sure it can be done, because I've found some related articles on the web, but none of them show me how I can configure RubyMine to do that.
I've searched every option in the menu and I can't figure it out by myself, so a "to the point" explanation would really be of help.
Thanks
There is no way to do this natively in RubyMine. My solution is to mount the remote filesystem to a local folder using sshfs.
Linux you can get sshfs through your package manager.
OSX you can get it here make sure to install both OSX fuse and SSHFS. The version on HomeBrew did not work for me on OSX 10.9.4 so I recommend using the packages from the link.
Windows you can use win-sshfs, I've had good results using Chocolaty to install win-sshfs
To use on Linux/OSX:
Open your terminal.
mkdir MountFolder
sshfs user#server.com:/path/to/project MountFolder/
To use on Windows:
Use the GUI.
After you've mounted the remote file system open RubyMine and select Open Directory and browse to the project.
This is the best solution I can come up with until JetBrains supports it natively.

How do I manually install an old cygwin package?

A project I am working on requires an old version of SLAPD (the LDAP
server) and must run on Windows, hence I am using cygwin packages:
I've found a binary package of slapd version I need 2.2.x here:
http://www.mirrorservice.org/sites/sourceware.org/pub/cygwin/release/...
How do I manually install it in cygwin? It does not seem to be a package-manager file format (like an RPM or a Deb), but is there a tool to install it for me?
FYI, I'm operating behind a corporate firewall that prevents me from viewing the main cygwin site (including the documentation), so please nobody tell me to RTFM - I wish I could!
Thanks
If you need an older version, the Cygwin time machine might help. To use it, I had to invoke setup.exe from the command line, giving it the --no-verify/-X option and it still wouldn't let me downgrade the "cygwin" package itself but at least it is, albeit very slowly, allowing me to install the version I wanted to test as a parallel installation.
If you are using the cygwin package installer to install this package, usually if you select to view the full info and scroll to the package you need you will see some info about the version.
Now if you click on the version number you will see that it changes from the oldest in the repository to the current. If your repository has the version you need then just finish the wizard.
Some cygwin mirrors keep old package files, for example, http://mirror.isoc.org.il/pub/cygwin/
You can use Sonatype nexus to mirror an existing cygwin repository, but provide your own setup.ini .
Copy the already downloaded repo content to c:\progs\nexus\sonatype-work\nexus\storage\mirror.isoc.org.il-pub-cygwin\
Put your own setup.ini and setup.bz2 there.
Start setup.exe with --no-verify
Paste
http://localhost:8081/nexus/content/repositories/mirror.isoc.org.il-pub-cygwin/
into the mirror selection box and click "Add"

Resources