I updated Extensibility Tools today.
I found Peek Definition is not working.
Anybody can help me to make it work.
Thanks
Joon
I found and made it enabled as follows:
Tools -> Options ->Text Editor ->All Languages ->CodeLens and check Enable CodeLens checkbox.
I have R# ReSharper 8 and Visual Studio 2013. I turned off some Code Inspection Settings that I want on. Instead of trying to figure out which setting I turned off, I would like to just reset them to their default values. How is that done?
This may help you
Go to Resharper -> Manage Options...
Click the "Reset All Settings" button.
or try deleting following file
C:\Users\<user-name>\AppData\Roaming\JetBrains\ReSharper\<resharper version>\vs<vs version>\UserSettings.xml
I haven't had much luck in finding an answer to this, I just switched computers and during debugging I noticed that only 'Step over' appears on the toolbar, there is no 'Step Into' or 'Step out'. Following some advice online I attempted going to Tools ->Customize ->Commands. I confirmed that the buttons are present under the 'Debug' menu bar (Although if I actually go to that Menu I once again only see 'Step over'). Some answers for Visual Studio 2008 said that its possible to drag and drop the commands, I haven't been able to do this either. Any suggestions?
if you right-click on the toolbar and select the option at the bottom which is "customize..."
then go to commands and select the radiobutton for toolbar.
go to the the item "debug" and click the button "Add command"
Good luck!
I was able to resolve this issue by going to Tools -> Import and Export Settings Wizard -> Reset all settings. Then just going through the wizard.
Can someone tell me why my Ctrl+F5 disappeared in Visual Studio 2008? Its not even in the menu. In the Debug menu, All I have is Windows, Start Debugging, Step Into, Step Over, Exceptions, and Toggle Breakpoints.
I'm using the professional edition of Visual Studio 2008 and for some reason, this morning, it just vanished.
You can re-add it: Tools -> Customize... -> Commands tab -> Select Debug -> Drag the "Start Without Debugging" command to the Debug menu and place it where you want it to be.
As for why it happened, hard to tell.
Was it the button there before becuase I just checked on mine and saw that there was no button with Ctrl+F5, but when you do the command, it works fine.
Right click on the menu bar and click Customize... from there you can add in any options that are missing.
Could this happen if the current "Startup Project" - the one in bold in the Solution Explorer - is not an executable?
(I don't have access to VS to check)
This is driving me crazy. Ever since I installed ReSharper 4, F12 no longer seems to work. If you look at the all the ReSharper short cuts in the Goto sub menu Declaration doesn't have any assigned!
The only way I can go to declaration is by using Alt and ` and then selecting Declaration.
I have tried un-installing and re-installing ReSharper with no luck, I have also, in ReSharper option asked it to use the default Visual Studio Key Bindings but that doesn't to work either.
Interestingly, when I do use Alt and ` I actually get two entries for the Declaration option.
Has anyone come across this problem?
I am using Visual Studio 2005 SP1.
I ran into the same issue and resolved it by first resetting my Visual Studio keyboard mappings:
Tools > Options > Keyboard > Reset
Then going into the ReSharper options and applying the scheme:
Resharper > Options > Visual Studio Integration > Apply Scheme
Update:
For VS2017 onwards:
Tools > Options > Environment > Keyboard > Reset
For Resharper 2017.2:
Resharper > Options > Environment > Keyboard & Menus > Keyboard Shortcuts > Apply Scheme
I have had a few occasions where Resharper and Visual Studio keybindings got mixed up and I had problems sorting them out.
If it is only one or two bindings you care about then you can change them by going to the
Tools->Customize->Keyboard menu option.
For ReSharper 8 and Visual Studio 2012:
Tools > Options > Keyboard > Reset
Then going into the ReSharper options and applying the scheme:
Resharper > Options > Environment > Keyboard & Menus > (Select Visual Studio under Keyboard Shortcuts) > Apply Scheme > Save
I had this problem and it was resolved by following the steps described in the picture:
Open Visual Studio Tabs on the path: Tools>>Options>>Keyboard
Open Visual Studio Tabs on the path: Resharper>>Options>>Keyboard & Menus and Do the following:
And Then Reopen the path above and do the following:
Finally, close the Visual Studio and open it.
I had this issue in VS2015 using Resharper 9.1.3, I tried Ryan's answer but it still didn't work.
After doing the steps Ryan outlined, I clicked F12 where Resharper asks What do you want to do?, I select Use Visual Studio commands. Still doesn't work.
Tools > Options > Keyboard > Select ReSharper.ReSharper_GotoNextHighlight from command list box
Change Shortcuts for selected command to F12 (Text Editor), click Remove and OK.
After this it works!
Try simple way to enable it, press Fn + Esc key of the keyboard.
It is possible that you have enabled Fn mode (Blue Keys) on your keyboard which overrides default behavior of functional keys including F12.
I had the same problem with VS2013 and Resharper 9. I have a code like this:
gridList.Method1();
gridList.Method2();
I then right-click on any of gridList and click Find Usages (or just use Shift+F12) but it says "Usages not found" even though it is just one line away! Sometimes VS restart would help, sometimes it wouldn't. It looks like clearing the cache of Reshaper helps though: Resharper -> Options -> Environment -> General -> Clear Caches. This needs VS to be restarted, but then it started working as expected.
My problem was that I couldn't use the command "Alt + F12" when trying to "peek definition" in Visual Studio. I found out through another forum-thread that it was Nvidia's GeForce Experience that overrides some of the "Alt" shortcuts and uses them for their functionalities with screen recordings etc.
What solved it for me, was going into the GeForce Experience settings and switch off the use of in-game overlay:
Alternatively, if you want to use the overlay, you can just change the short cut commands.
For ReSharper Ultimate 2017.3.3 and Visual Studio 2017:
Tools > Options > Tools > External Sources > Default Visual Studio Navigation > Save
I ran into this problem after an organizational change that caused my windows profile to change. I tried the solutions listed above, but nothing seemed to work.
Here is how I fixed it (brute force worked!)
NOTE: Steps listed are for VS 2012 and ReSharper 7.1.3
Uninstalled Re-Sharper
Exit visual studio, ensure the process devenv.exe is no longer there in the running processes (was there in my case and I had to do a "End Process Tree" from Task Manager)
Fired up VS 2012, and from the menu Tools -> Options -> Environment -> Keyboard selected Visual C# 2005 (or any other setting you love) and pressed Reset
Shutdown VS again (and ensure devenv.exe has been killed in Task manager)
Re-installed re-sharper
Best of luck!
These steps solved it for me:
Uninstall keyboard in Device Manager
Re-insert your keyboard usb
"Web Essentials"
Add or update visual studio "Web Essentials" You can find it at:
Menu>>Tools>>Extensions and Updates
I hope this will save your time. It worked for me.
ReSharper added a crap 'good' new thing that they now call a feature: Smart Go To Declaration. As dumb as it may sound, it comes enabled by default: crap 'good'.
The feature is described on the link provided from here but honestly at least it should've keep it disabled, not reinvent the wheel. It also tells you how to disable that crap 'good' feature.
Sometimes it has noting to do with Visual Studio at all. Be sure your keyboard has its function key setting of the keyboard itself to send the F12 function to Visual Studio. It is an easy thing to miss.
I had just installed Pulover’s Macro Creator and F12 was set as the global hotkey to pause a macro. It was intercepting the keypress before it had a chance to get to VS.
Solution is to change that hotkey to something else. I chose Ctrl-F12. The input box is on the top right of the Pulover window.
Update 2020. I had the same problem and also tried a lot of ways, but that was still didn't working... [VS 2015, ReSharper 2019.3.1]
But, like Andrius said:
Resharper -> Options -> Environment -> General -> Clear Caches. This needs VS to be restarted, but then it started working as expected.
Summary is: (try steps above) + Resharper..-> Clear Caches + VS restart. Hope this will be useful