I'm trying to solve a really strange problem. Two Outlook Clients are showing the wrong reciever after sending a E-Mail (jon.doe#example.com).
His Contact Details are:
Jon Doe
0012 3456 7891
jon.doe#example.com
but after sending in the "To:" field the Name Max Musterman is listed there.
Max Musterman has following Information:
Max Mustermann
0019 8765 4321
After some testing we found out that even when you did not send the email and just enter the jon.doe#example.com into the "To:" field it is associated with Max Mustermann but they don't share ANY information.
Someone some ideas ?
Double click on Max Mustermann if shown once you enter jon.doe#example.com, then on the General tab and the E-mail Addresses tab (under SMTP:) what email address is shown there? If it shows jon.doe#example.com, then this means jon.doe#example.com is Max Mustermann and Max Mustermann's email address is jon.doe#example.com.
Related
I have a case when SFMC JB performed an SMS send to records, that did not have a phone number in DE for Entry Source, but there is a phone number assigned to them in the database.
The Journey settings were set to "Use phone number attribute from entry source - Phone".
Here is an example record in DE:
SubscriberKey | Email | Phone
123 | example#gmail.com | null
Help states that "To send SMS from a journey, the normalized phone number (country code + phone number with no dashes or parentheses) is required in your data extension."
Could you please tell me how to troubleshoot this case, or if you see any other potential things that have given the following output? And how to perform a send so it does not happen again?
Thanks a lot!
I'm running in to the following issue.
I'm working on a private intranet that makes use of user accounts. As administrator you are able to select a specific usergroup (or all) and puts all email adresses that are in the selected usergroup as a long string like so (clearly not the best way but it is what the clients budget allowed).
Send mail
Now I'm not really sure what the issue is but somehow not all email adresses are send to outlook so they can send their 'newsletter' .
In total there should be 89 adressses containing 2206 characters. When I click the link only 2065 characters get trough.
When using this method over Imail it works fine but office keeps truncating in some way.
Does office only allow a max. count of characters at once in their Bcc? There is nothing I can find about this on the internet.
Hope you guys could help me out,
Thanks in advance.
Mots browsers limit the length of a url. In IE the max length is 2083 characters: https://support.microsoft.com/en-us/help/208427/maximum-url-length-is-2-083-characters-in-internet-explorer
I'm using a SIM800L GSM module connected over USB-Serial to my computer.
When I try to send a SMS I got an error:
AT+CMGS="+4915xxxxxxxxx"
> Test (Ctrl+Z)
+CMS ERROR: Invalid number format (incomplete number)
I’m obviously connected to the network because pin is entered +CREG an +COPS seems good.
AT+CPIN?
+CPIN: READY
OK
AT+CREG?
+CREG: 0,1
OK
AT+COPS?
+COPS: 0,0,"O2 (Germany)"
OK
As well I can receive SMS and see incoming calls.
I set the module in sms text mode and use the coding GSM
AT+CMGF?
+CMGF: 1
OK
AT+CSCS?
+CSCS: "GSM"
OK
I try different number formats like "015xxxxxxxxx" or "004915xxxxxxxxx". Also I try different values for the optional parameter from +CMGS
Could anybody advise me what to do?
To send SMS it was necessary for me to change the SMSC adress with the command AT+CSCA.
AT+CSCA="+491760000443",145
The SMSC you can found at your mobile operator. In my case Netzclub at O2 Germany.
I'm trying to read the data off a contactless Visa Paywave card.
For the Paywave, I have to submit a SELECT using PPSE (2PAY.SYS.DDF01) instead of PSE (1PAY.SYS.DDF01).
The EMV book 1, section 11.3.4, table 43 only describes how to interpret the response for a successful SELECT command using PSE. Does anyone know or can refer me to a source that shows how to process the data returned from a successful SELECT command using PPSE?
Here's my request APDU:
00A404000e325041592e5359532e444446303100
Here's the response:
6F2F840E325041592E5359532E4444463031A51DBF0C1A61184F07A0000000031010500A564953412044454249548701019000
I understand tag 84, tag 85, tag BF0C from the response. According to the examples for reading PSE, I should be able to just send GET PROCESSION OPTIONS (to get the AIP and AFL) with PDOL = null after this successful response as follows: 80A80000830000.
But request 80A80000830000 returns error code 6985 - Command not allowed; conditions of use not satisfied.
I also tried reading all the files after successfully selecting the PPSE by traversing through every single SFI (0-30) and every single record (0-16) of each SFI. Yes, I also did the 3 bit shift and bitwise-OR the SFI with 0x4. But I got no data.
I'm stuck, any help that would point me into getting some info from my Paywave card would be appreciated!
Have you tried this tool from EMVLAB http://www.emvlab.org/emvtags/
Using that tool,
http://www.emvlab.org/tlvutils/?data=6F2F840E325041592E5359532E4444463031A51DBF0C1A61184F07A0000000031010500A564953412044454249548701019000
2PAY.SYS.DDF01 is for contactless (e.g. NFC ) cards, while 1PAY.SYS.DDF01 is for contact cards.
After successfully (SW1 SW2 = 90 00) reading a PSE, you should only search for the SFI (tag 88) which is a mandatory field in the FCI template returned.
With the SFI as your start index, your would have to read the records starting from the start index until you get a 6A83 (RECORD_NOT_FOUND). E.g. if your SFI is 1, you would do a readRecord with record_number=1. That would probably be successful. Then you increament record_number to 2 and do readRecord again. The increament to 3 .... Repeat it until you get 6A83 as your status.
The records read would be ADFs (at least 1). Then your would have to compare the read ADF Names with what your terminal support and also based on the ASI (Application Selection Indicator). At the end you would have a list of possible ADFs (Candidate list)
All the above steps (1-3) are documented in chapter 12.3.2 Book1 v4.3 of the EMV spec.
You would have to make a final selection (Chapter 12.4 Book1)
Read the spec book 1 chapter 12.3 - 12.4 for all the detailed steps.
You seem to have the flow mixed up a bit, you want to:
Send 1PAY or 2PAY, it doesn't actually matter for all of the cards I've tested. This will return a list of the AIDs available on the card. Alternately you can just select an AID straight away if you know it's there but good practice would be to check first.
Get the list of AIDs returned in response to 1PAY/2PAY, in PayWave's case this will probably be A0000000031010 if you sent 2PAY but you may get more if you send 1PAY.
Select one of the AIDs sent back (or one you already know is on there).
Then loop through the SFIs and records sending the Read Records command to get the data.
You don't have to send Get Processing Options before sending the Read Records command even though that's now a normal transaction flow goes.
I think the information you're looking for is available from this VISA website. But only if you're a registered and/or licensed partner of VISA.
EDIT: Looking at the resulting TLV struct under BF0C:
tag=0xBF0C, length=0x1A
tag=0x61, length=0x18
tag=0x4F, length=0x07, value=0xA0000000031010 // looks like an AID to me
tag=0x50, length=0x0A, value="VISA DEBIT"
tag=0x87, length=0x01, value=0x01
I would guess that you need to first select A0000000031010 before getting the processing options.
I was selecting application 2PAY.SYS.DDF01. when I should have been selecting AID = 0xA0000000031010. It looks like there's no records under application 2PAY.SYS.DDF01.
But there was 1 record under application 0xA0000000031010. After I got this application, I performed a READ RECORD, and the first record gave me the PAN and all the credit card info I wanted.
Thanks everyone for chiming in.
Let me explain the background with an example. I receive an email from person1, I re-send this email to Person3 and Person2 waiting for a response. Person2 re-sends email to person4 who answers the email to person2; then, person2 emails the answer to me and, finally, I answer to person1.
Is there a way to "automatically" track and show all this sequence of mails in outlook? If yes, how?
For example I would like to see:
10-jan-11 15:00, I need a new computer, to: My name, from: person1
10-jan-11 15:30, I need a new computer, to: person2;person3, from: My name
10-jan-11 17:00, xx needs a new computer, to: peson4, from:person2
11-jan-11 08:00, There are not computers, to:person2, from:person4
11-jan-11 08:10, Sorry, we have a used one, to:My name, from:person2
11-jan-11 09:00, Accept the used one meanwhile we buy one, to person1, from:My name
Best regards.
Each email message carries in itself a list of references (message-ids to which each of the forwards/answers applied). So if you were CC'ed on all those messages your email client could have re-constructed the whole thread. If you open the last email's source and check the headers you'll probably see the References: header with the list of all message ids involved (or Microsoft's Thread-index)
The problem is that you're not CC'ed on all those messages and each person in this thread sees only part of the thread. I don't think Outlook can show you the whole history unless you're always copied.
What is a general problem you're trying to solve?