All my apps work fine but this new installed paint code crashes on start, so I cant even use it.
log here http://pastebin.com/ZS4a2whE
What could i do? Is it because of VMWare?
OSX inside Vmware has some serious limitations in terms of graphics (3D acceleration) and paintcode relies on these features which VMWare does not provide inside a OSX Guest OS.
Not just paintcode, if you noticed, even keynote/iWork will not work as expected.
We only hope further versions of vmware comes with 3D acceleration for OSX Guest.
Related
I am trying to run genymotion on a rMBP in HiDPI mode. Apparently my Virtualbox version already has <key>NSHighResolutionCapable</key> <true/> set in Contents/Info.plist
Still genymotion does scale the vm up to 200%, which not only makes everything look pretty blurry, but also adds blurriness from downscaling.
I am using Virtualbox 4.3.2 and genymotion 1.3.1 on OSX 10.9.
Genymotion uses VirtualBox under the hood, and they probably will never support proper HiDPI rendering, because of flawed reasoning (like "other OSes don't know about HiDPI, so picture must be scaled").
Source — comment to the ticket
Although I'm not sure if the VirtualBox is actually used for rendering the picture… if not, then VirtualBox rendering problems are probably not an issue.
It's not supported at the moment (Genymotion 2.2.2).
From Genymotion's twitter:
Sam Soffes #Genymotion any plans for Retina Mac support?
Genymotion #soffes absolutely, but it will takes time, as we need to
change a lots of things to support HiDef screens.
Update: Genymotion now fully supports Retina screen resolutions [Version 2.7.0].
I would like to know if I can install Xcode with Windows XP.If possible please provide the document link also.Thank you very much for any help in advance...
It's certainly possible.
There are two routes;
Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
Run Mac OS X Server under VMWare.
The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with a NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.
If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.
The second option is the more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result there's no support in VMWare for this. Leopard server however CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive however.
If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.
I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.
Alternatively you could pickup a low-spec Mac Mini from eBay. You don't need much horse power to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.
No. You can not install XCode on a Windows machine. You need MacOS to run XCode.
Although you can install VMWare Server on your windows machine and then install MacOS on that virtual server and can install the XCode on that MacOS server.
But to install MacOS(VMWare server) and start working on it. your hardware must support virtualization.
To install VMWare following links might be useful.
http://www.petri.co.il/virtual_install_vmware_server.htm
http://www.virtuatopia.com/index.php/Installing_VMware_Server_2.0_on_Windows_Systems
Or there is always Google.
YOu can check if your CPU supports virtualization here.
Since Xcode is an software of Mac OS so its not possible to run Xcode without Mac OS. And for Mac OS you can dual boot your computer with a Mac OS or simply you can just use VMWare to install Mac OS in your laptop or PC. Just the necessary requirement for installing Mac OS through Dual boot or through VMWare is that you need really high configuration in your laptop or PC, Like atleast you require 5th Generation core processor with atleast 4 cores also you require more than 4GB RAM for better functioning of Mac OS. Mac OS can be installed with 2nd generation processors, Dual core, and 2 GB RAM but it will take too much time. Which is not worth installing Mac OS in your laptop or PC. And even after installing you won't be able to use Xcode efficiently with such a low configuration. So it is recommended to have 5th Generation processor with 4 core and atleast 4GB RAM.
If you have this configuration than you need some files and software to install Mac OS in your Laptop.
For installation through VMWare you can prefer to this video: https://www.youtube.com/watch?v=wodqGvug6e0
And I have the required file for the same as in video but not uploaded to the internet.
I'm trying to learn to code in Objective C, but I am not ready to commit to purchasing a Mac for just this purpose, seeing as I have a good Dell laptop. My computer has VMware installed on it, but I do not know how to actually go through the steps, and I do not know what I need to install or purchase(if absolutely necessary). Eventually, I hope to get a Mac, so this won't be needed, but until then, I want to find a way to compile Objective C so I can actually learn how to use it. Thanks.
While it is technically possible, I'll tell you from experience:
To run Xcode and the iOS Simulator, you will need to have MacOS running. Oficially it only runs on Apple Hardware, buuut, you can always use virtualizers and Hackintosh. There are plenty of good tutorials online if you choose this method.
My advice: DON'T do it!
When I started to develop iOS apps, I had a Windows PC, but after trying lots of different approaches to virtualize MacOS, with none I had great results. I bought a MacBook on a sale, and it's just a better iOS development experience overall. It's priceless not to have to deal with driver searching and compatibility issues.
First virtualize MacOS X, inside then iOS with XCode. See http://www.macbreaker.com/2012/07/mountain-lion-virtualbox.html
Yes you can, you need to virtualize OSX inside you Windows, and then use XCode as the other stated, however it doesen't work with nearly all AMD CPU's but i think Dell uses mostly Intel. And a Mac costs alot. For example i don't have money for one, the cheapest one costs $1,600 where i come from, but if you are going to get a Mac, i would wait for that.
But they really are expensive, and i only need a Macbook for debugging.
[Assuming you already have the mac installation image or vmware file]
Sadly Vmware does not include support for mac in it's latest versions
So you'll have to patch(aka Vmware Unlocker for OS X) it.
Follow this link http://www.insanelymac.com/forum/files/file/20-vmware-unlocker-for-os-x/ (you'll be required to set up an account)
Or alternatively you can download the VirtualBox(https://www.virtualbox.org/)
Happy Coding
Use virtualbox instead of VMWare. If it does'nt work, install the extension pack for virtualbox.
We're getting into iOS development with MonoTouch. All of our machines are Mac Pros with Windows 7 installed via BootCamp. I'm not crazy about rebooting into OS X just to access the MonoTouch IDE. I'm wondering if it's legal and possible to install OS X on a VM within Windows (if I'm already on Apple hardware, it should be ok, right?). Any other issues with Apple's SDK in a VM (I heard they do some hardware checking of some sort). Thanks in advance for any suggestions!
You can't really run OSX on a VM under windows without going the hacking route. The only way to properly virtualize OSX is to run OSX Server under OSX itself, which is not what you want.
The best option for you is to do what I do: run OSX on your Mac, then use something like VMWare or Parallels to run the Windows you have on your BootCamp as a VM. Works beautifully.
Yup, Eduardo is right, running OSX under non-apple hardware is considered illegal according to apple's license. Moreover, you may run into some issues when creating your developer's account or sumbitting apps.
However, if you still want go the hack way, you can refer to osx86project or just search google for "how to create a hackintosh".
Is it possible to install it on VirtualBox or other virtualization solution? If yes, how fast it works?
I don't see any problem running MonoTouch frameworks/IDEs in a virtualized Mac.
I can expect a lot of problems transferring across the USB cable the compiled applications to a real iPhone/iPad to test it. iTunes and XCode tend to be very picky about the configurations.
Buying a cheapest Mac might be easier and less costly if you consider the time you might waste, but your mileage may vary.
The evaluation version of MonoTouch will run, but the SDK tools used on the production version wont.
We were able to develop and deploy apps to real devices under VMWare Player and WMWare workstation. The problem we have is MonoTouch activations. It would activate and randomly need reactivation. It would work for a while then it would fail to activate.
Each time it failed we would need to contact support and reset the key so we could continue working. They do not support virtualized hardware and do not plan to fix the activation issue.
In the end we purchased real hardware.
Via VMWare Workstation I have it running quite nicely. Installing apps to iOS devices is fine, but creating a network for softdebug to find the iphone (or vice versa) is the only problem I've seen.
I'm trying to figure that out right now - I'll try and update this thread with the solution.