How can I make pandoc create a cell with the first thing being a line break in a grid table?
The following makes latex say ! LaTeX Error: There's no line here to end.
+-----------------------------------+------------------------------------+
| X | Y |
+===================================+====================================+
|Total revenue:\ | \ |
| - Current year\ | YYY\ |
| - Previous year\ | XXX\ |
|Total profit/loss:\ | \ |
| - Current year\ | TTT\ |
| - Previous year | ZZZ |
+-----------------------------------+------------------------------------+
Using linebreaks for layouting is frowned upon in Markdown and HTML. Because it's not semantic, but also because it often doesn't work well (like in your example).
I would make the table.... well, more tabular:
X Y
-------------- -------------- ---- ----
Total revenue:
Current year XXX YYY
Previous year XXX YYY
Total profit:
Current year XXX YYY
Previous year XXX YYY
Using \mbox{} \ will create the expected line breaks and no latex errors
+-----------------------------------+------------------------------------+
| X | Y |
+===================================+====================================+
|Total revenue:\ | \mbox{} \ |
| - Current year\ | YYY\ |
| - Previous year\ | XXX\ |
|Total profit/loss:\ | \mbox{} \ |
| - Current year\ | TTT\ |
| - Previous year | ZZZ |
+-----------------------------------+------------------------------------+
I have created an issue at github https://github.com/jgm/pandoc/issues/1733
Related
My file looks as follows:
+------------------------------------------+---------------+----------------+------------------+------------------+-----------------+
| Message | Status | Adress | Changes | Test | Calibration |
|------------------------------------------+---------------+----------------+------------------+------------------+-----------------|
| Hello World | Active | up | 1 | up | done |
| Hello Everyone Here | Passive | up | 2 | down | none |
| Hi there. My name is Eric. How are you? | Down | up | 3 | inactive | done |
+------------------------------------------+---------------+----------------+------------------+------------------+-----------------+
+----------------------------+---------------+----------------+------------------+------------------+-----------------+
| Message | Status | Adress | Changes | Test | Calibration |
|----------------------------+---------------+----------------+------------------+------------------+-----------------|
| What's up? | Active | up | 1 | up | done |
| Hi. I'm Otilia | Passive | up | 2 | down | none |
| Hi there. This is Marcus | Up | up | 3 | inactive | done |
+----------------------------+---------------+----------------+------------------+------------------+-----------------+
I want to extract a specific column using AWK.
I can use CUT to do it; however when the length of each table varies depending on how many characters are present in each column, I'm not getting the desired output.
cat File.txt | cut -c -44
+------------------------------------------+
| Message |
|------------------------------------------+
| Hello World |
| Hello Everyone Here |
| Hi there. My name is Eric. How are you? |
+------------------------------------------+
+----------------------------+--------------
| Message | Status
|----------------------------+--------------
| What's up? | Active
| Hi. I'm Otilia | Passive
| Hi there. This is Marcus | Up
+----------------------------+--------------
or
cat File.txt | cut -c 44-60
+---------------+
| Status |
+---------------+
| Active |
| Passive |
| Down |
+---------------+
--+--------------
| Adress
--+--------------
| up
| up
| up
--+--------------
I tried using AWK but I don't know how to add 2 different delimiters which would take care of all the lines.
cat File.txt | awk 'BEGIN {FS="|";}{print $2,$3}'
Message Status
------------------------------------------+---------------+----------------+------------------+------------------+-----------------
Hello World Active
Hello Everyone Here Passive
Hi there. My name is Eric. How are you? Down
Message Status
----------------------------+---------------+----------------+------------------+------------------+-----------------
What's up? Active
Hi. I'm Otilia Passive
Hi there. This is Marcus Up
The output I'm looking for:
+------------------------------------------+
| Message |
|------------------------------------------+
| Hello World |
| Hello Everyone Here |
| Hi there. My name is Eric. How are you? |
+------------------------------------------+
+----------------------------+
| Message |
|----------------------------+
| What's up? |
| Hi. I'm Otilia |
| Hi there. This is Marcus |
+----------------------------+
or
+------------------------------------------+---------------+
| Message | Status |
|------------------------------------------+---------------+
| Hello World | Active |
| Hello Everyone Here | Passive |
| Hi there. My name is Eric. How are you? | Down |
+------------------------------------------+---------------+
+----------------------------+---------------+
| Message | Status |
|----------------------------+---------------+
| What's up? | Active |
| Hi. I'm Otilia | Passive |
| Hi there. This is Marcus | Up |
+----------------------------+---------------+
or random other columns
+------------------------------------------+----------------+------------------+
| Message | Adress | Test |
|------------------------------------------+----------------+------------------+
| Hello World | up | up |
| Hello Everyone Here | up | down |
| Hi there. My name is Eric. How are you? | up | inactive |
+------------------------------------------+----------------+------------------+
+----------------------------+---------------+------------------+
| Message |Adress | Test |
|----------------------------+---------------+------------------+
| What's up? |up | up |
| Hi. I'm Otilia |up | down |
| Hi there. This is Marcus |up | inactive |
+----------------------------+---------------+------------------+
Thanks in advance.
One idea using GNU awk:
awk -v fldlist="2,3" '
BEGIN { fldcnt=split(fldlist,fields,",") } # split fldlist into array fields[]
{ split($0,arr,/[|+]/,seps) # split current line on dual delimiters "|" and "+"
for (i=1;i<=fldcnt;i++) # loop through our array of fields (fldlist)
printf "%s%s", seps[fields[i]-1], arr[fields[i]] # print leading separator/delimiter and field
printf "%s\n", seps[fields[fldcnt]] # print trailing separator/delimiter and terminate line
}
' File.txt
NOTES:
requires GNU awk for the 4th argument to the split() function (seps == array of separators; see gawk string functions for details)
assumes our field delimiters (|, +) do not show up as part of the data
the input variable fldlist is a comma-delimited list of columns that mimics what would be passed to cut (eg, when a line starts with a delimiter then field #1 is blank)
For fldlist="2,3" this generates:
+------------------------------------------+---------------+
| Message | Status |
|------------------------------------------+---------------+
| Hello World | Active |
| Hello Everyone Here | Passive |
| Hi there. My name is Eric. How are you? | Down |
+------------------------------------------+---------------+
+----------------------------+---------------+
| Message | Status |
|----------------------------+---------------+
| What's up? | Active |
| Hi. I'm Otilia | Passive |
| Hi there. This is Marcus | Up |
+----------------------------+---------------+
For fldlist="2,4,6" this generates:
+------------------------------------------+----------------+------------------+
| Message | Adress | Test |
|------------------------------------------+----------------+------------------+
| Hello World | up | up |
| Hello Everyone Here | up | down |
| Hi there. My name is Eric. How are you? | up | inactive |
+------------------------------------------+----------------+------------------+
+----------------------------+----------------+------------------+
| Message | Adress | Test |
|----------------------------+----------------+------------------+
| What's up? | up | up |
| Hi. I'm Otilia | up | down |
| Hi there. This is Marcus | up | inactive |
+----------------------------+----------------+------------------+
For fldlist="4,3,2" this generates:
+----------------+---------------+------------------------------------------+
| Adress | Status | Message |
+----------------+---------------|------------------------------------------+
| up | Active | Hello World |
| up | Passive | Hello Everyone Here |
| up | Down | Hi there. My name is Eric. How are you? |
+----------------+---------------+------------------------------------------+
+----------------+---------------+----------------------------+
| Adress | Status | Message |
+----------------+---------------|----------------------------+
| up | Active | What's up? |
| up | Passive | Hi. I'm Otilia |
| up | Up | Hi there. This is Marcus |
+----------------+---------------+----------------------------+
Say that again? (fldlist="3,3,3"):
+---------------+---------------+---------------+
| Status | Status | Status |
+---------------+---------------+---------------+
| Active | Active | Active |
| Passive | Passive | Passive |
| Down | Down | Down |
+---------------+---------------+---------------+
+---------------+---------------+---------------+
| Status | Status | Status |
+---------------+---------------+---------------+
| Active | Active | Active |
| Passive | Passive | Passive |
| Up | Up | Up |
+---------------+---------------+---------------+
And if you make the mistake of trying to print the '1st' column, ie, fldlist="1":
+
|
|
|
|
|
+
+
|
|
|
|
|
+
If GNU awk is available, please try markp-fuso's nice solution.
If not, here is a posix-compliant alternative:
#!/bin/bash
# define bash variables
cols=(2 3 6) # bash array of desired columns
col_list=$(IFS=,; echo "${cols[*]}") # create a csv string
awk -v cols="$col_list" '
NR==FNR {
if (match($0, /^[|+]/)) { # the record contains a table
if (match($0, /^[|+]-/)) # horizontally ruled line
n = split($0, a, /[|+]/) # split into columns
else # "cell" line
n = split($0, a, /\|/)
len = 0
for (i = 1; i < n; i++) {
len += length(a[i]) + 1 # accumulated column position
pos[FNR, i] = len
}
}
next
}
{
n = split(cols, a, /,/) # split the variable `cols` on comma into an array
for (i = 1; i <= n; i++) {
col = a[i]
if (pos[FNR, col] && pos[FNR, col+1]) {
printf("%s", substr($0, pos[FNR, col], pos[FNR, col + 1] - pos[FNR, col]))
}
}
print(substr($0, pos[FNR, col + 1], 1))
}
' file.txt file.txt
Result with cols=(2 3 6) as shown above:
+---------------+----------------+-----------------+
| Status | Adress | Calibration |
+---------------+----------------+-----------------|
| Active | up | done |
| Passive | up | none |
| Down | up | done |
+---------------+----------------+-----------------+
+---------------+----------------+-----------------+
| Status | Adress | Calibration |
+---------------+----------------+-----------------|
| Active | up | done |
| Passive | up | none |
| Up | up | done |
+---------------+----------------+-----------------+
It detects the column width in the 1st pass then splits the line on the column position in the 2nd pass.
You can control the columns to print with the bash array cols which is assigned at the beginning of the script. Please assign the array to the list of desired column numbers in increasing order. If you want to use the bash variable in different way, please let me know.
I have a Google Sheet that contains names of characters, together with corresponding values for the group name, "selected" and attack power. It looks like this:
Sheet1
| NAME | GROUP NAME | SELECTED | ATTACK POWER |
|:---------|:-----------|----------:|-------------:|
| guile | Team Red | 1 | 333 |
|----------|------------|-----------|--------------|
| blanka | Team Red | 1 | 50 |
|----------|------------|-----------|--------------|
| sagat | Team Red | | 500 |
|----------|------------|-----------|--------------|
| ruy | Team Blue | 1 | 450 |
|----------|------------|-----------|--------------|
| vega | Team Blue | 2 | 150 |
Sheet2
In my second sheet, I have two columns. Group name, which contains names of each team from Sheet1 and names, which contains my current ArrayFormula:
=ARRAYFORMULA(TEXTJOIN(CHAR(10); 1;
REPT('Sheet1'!A:A; 1*('Sheet1'!B:B=A2))))
Using this formula I can combine all characters into one cell (with textjoin, repeated with row breaks) based on the value in Group name. The result looks like the following:
| GROUP NAME | NAME |
|:-----------|:--------------------------|
| Team Red | guile |
| | blanka |
| | sagat |
|------------|---------------------------|
| Team Blue | ruy |
| | vega |
|------------|---------------------------|
The problem is that I only want to combine the characters with having a selected value of 1. End-result should instead look like this:
| GROUP NAME | NAME |
|:-----------|:--------------------------|
| Team Red | guile |
| | blanka |
|------------|---------------------------|
| Team Blue | ruy |
|------------|---------------------------|
I tried the following setup using a IF-statement, but it just returns a string of FALSE:
=ARRAYFORMULA(TEXTJOIN(CHAR(10); 1;
REPT(IF('Sheet1'!C:C="1";'Sheet1'!A:A); 1*('Sheet1'!B:B=A2))))
Can this be one?
paste in F2 cell:
=UNIQUE(FILTER(B:B, C:C=1))
paste in G2 cell and drag down:
=TEXTJOIN(CHAR(10), 1, FILTER(A:A, B:B=F2, C:C=1))
or G2 cell be like:
=ARRAYFORMULA(TEXTJOIN(CHAR(10), 1,
REPT(FILTER(Sheet1!A:A, Sheet1!C:C=1), 1*(FILTER(Sheet1!B:B, Sheet1!C:C=1)=F2))))
i need help with a query, can't get it to work correctly. What i'm trying to achieve is to have a select box displaying the number of records associated with a particular theme, for some theme it works well for some it displays (0) when infact there are 2 records, I'm wondering if someone could help me on this, your help would be greatly appreciated, please see below my actual query + table structure :
SELECT theme.id_theme, theme.theme, calender.start_date,
calender.id_theme1,calender.id_theme2, calender.id_theme3, COUNT(*) AS total
FROM theme, calender
WHERE (YEAR(calender.start_date) = YEAR(CURDATE())
AND MONTH(calender.start_date) > MONTH(CURDATE()) )
AND (theme.id_theme=calender.id_theme1)
OR (theme.id_theme=calender.id_theme2)
OR (theme.id_theme=calender.id_theme3)
GROUP BY theme.id_theme
ORDER BY theme.theme ASC
THEME table
|---------------------|
| id_theme | theme |
|----------|----------|
| 1 | Yoga |
| 2 | Music |
| 3 | Taichi |
| 4 | Dance |
| 5 | Coaching |
|---------------------|
CALENDAR table
|---------------------------------------------------------------------------|
| id_calender | id_theme1 | id_theme2 | id_theme3 | start_date | end_date |
|-------------|-----------|-----------|-----------|------------|------------|
| 1 | 2 | 4 | | 2015-07-24 | 2015-08-02 |
| 2 | 4 | 1 | 5 | 2015-08-06 | 2015-08-22 |
| 3 | 1 | 3 | 2 | 2014-10-11 | 2015-10-28 |
|---------------------------------------------------------------------------|
LISTBOX
|----------------|
| |
| Yoga (1) |
| Music (1) |
| Taichi (0) |
| Dance (2) |
| Coaching (1) |
|----------------|
Thanking you in advance
I think that themes conditions should be into brackets
((theme.id_theme=calender.id_theme1)
OR (theme.id_theme=calender.id_theme2)
OR (theme.id_theme=calender.id_theme3))
Hope this help
I've got the following problem:
There is a Postgres database which I need to get data from, via a Nagios Linux distribution.
My intention is to make a resulting SELECT be saved to a .txt, that would be sent via email to me using MUTT.
Until now, I've done:
#!/bin/sh
psql -d roaming -U thdroaming -o saida.txt << EOF
\d
\pset border 2
SELECT central, imsi, mapver, camel, nrrg, plmn, inoper, natms, cba, cbaz, stall, ownms, imsi_translation, forbrat FROM vw_erros_mgisp_totalizador
EOF
My problem is:
The .txt "saida.txt" is bringing me info about the database, as follows:
Lista de relações
Esquema | Nome | Tipo | Dono
---------+----------------------------------+-----------+------------
public | apns | tabela | jmsilva
public | config_imsis_centrais | tabela | thdroaming
public | config_imsis_sgsn | tabela | postgres
(3 Registers)
+---------+---------+----------+---------+---------+--------+------------+-------+---------+----------+-------+-------+------------------+-----------+
| central | imsi | mapver | camel | nrrg | plmn | inoper | natms | cba | cbaz | stall | ownms | imsi_translation | forbrat |
+---------+---------+----------+---------+---------+--------+------------+-------+---------+----------+-------+-------+------------------+-----------+
| MCTA02 | 20210 | | | | | INOPER-127 | | | | | | | |
| MCTA02 | 20404 | | | | | INOPER-127 | | | | | | | |
| MCTA02 | 20408 | | | | | INOPER-127 | | | | | | | |
| MCTA02 | 20412 | | | | | INOPER-127 | | | | | | | |
.
.
.
How could I make the first table not to be imported to the .txt?
Remove the '\d' portion of the script which causing listing the tables in the DB you see at the top of your output. So your script will become:
#!/bin/sh
psql -d roaming -U thdroaming -o saida.txt << EOF
\pset border 2
SELECT central, imsi, mapver, camel, nrrg, plmn, inoper, natms, cba, cbaz, stall, ownms, imsi_translation, forbrat FROM vw_erros_mgisp_totalizador
EOF
To get the output to appear CSV formatted in a file named /tmp/output.csv do you can do the following:
#!/bin/sh
psql -d roaming -U thdroaming -o saida.txt << EOF
\pset border 2
COPY (SELECT central, imsi, mapver, camel, nrrg, plmn, inoper, natms, cba, cbaz, stall, ownms, imsi_translation, forbrat FROM vw_erros_mgisp_totalizador) TO '/tmp/output.csv' WITH (FORMAT CSV)
EOF
I am working with JasperReports 4.5.0, Spring 3.0.5 RELEASE. I am exporting my JR report in pdf, html, csv formats. With pdf, html the report is generating fine.
But when i am exporting my report in csv it is displaying all the fields and values in one column only. My code flow is exactly like this link.
Below is the example how I am getting now.
| A | B | C | D |
|S.No,IPAddress,TotalDuration,TotalBdrCount | | | |
|1,null,266082,null | | | |
2,null,null,null | | | |
3,null,null,null | | | |
4,null,null,null | | | |
Where S.No,IPAddress,TotalDuration,TotalBdrCount are the column headers and 1,null,266082,null are the values to the respective columns.
But my requirement is
| A | B | C | D |
| S.No | IPAddress | TotalDuration | TotalBdrCount |
I think you understood my problem. For this am i need to set any parameters? I am not getting. Can any one help me out regarding this issue.