SET TERM ^ ;
CREATE PROCEDURE ljudjee
AS
DECLARE VARIABLE i integer=1;
DECLARE VARIABLE d integer;
DECLARE VARIABLE e integer;
DECLARE VARIABLE star integer;
BEGIN
while (i <= 1000000) do
begin
d=((rand()*99999)+1);
e=((rand()*99999)+1);
star=((rand()*50)+18);
insert into ljudje values (:i,'Ime','Priimek',:star,:d,:e);
i = i + 1;
END
END^
SET TERM ; ^
Well i dont get any errors from this code when executing it. It seems like everything is ok but when i try to EXECUTE PROCEDURE it doesnt work. There are also no errors but procedure execution time takes forever and actually does nothing. It must be something wrong with rand() function which i probably didnt use correctly. Any ideas? Also no records are inserted into the table. None at all.
In case you havent found the issue. You are inserting a million records in a single transaction. You will not see some of them. Its a all or nothing deal. It could be that your database is not set up correctly in terms of caching and page sizes. Often it is faster to drop any indexes, do the inserts and then create the indexes.
Try using trunc():
d = trunc((rand() * 99999) + 1);
e = trunc((rand() * 99999) + 1);
star = trunc((rand() * 50) + 18);
Related
i have a function that puts a number in a var (var1). if var1 = 3 then create 3 new variables and assign a value for later send that values in an out type. I don't know how can i do, my code is something like this where "pos" acts like an INSTR() that i know its each 13 chars. And "newvar||var1" is because i want my vars names be newvar1, newvar2, newvar3, etc.:
FOR n IN 1..var1
LOOP
pos NUMBER(4):= 0;
newvar||var1 NUMBER(3);
newvar||var1 := SUBSTR(TO_NUMBER(numberInsideString), 1, 1+pos);
pos := pos+13;
END LOOP;
My question is, how a person who really know PLSQL would do that, im learning PLSQL please help. thank you.
What you want to try to do suggests that you need a one dimensional array in order repeatedly to assign new values for each iteration within the loop. One of the types in OWA package such as vc_arr(composed of VARCHAR2 data type values) is handy to define an array.
Coming to the code, you can start with moving the variables into the declaration section, and write such a simple code as a sample exercise
SET serveroutput ON
DECLARE
pos INT := 0;
numberInsideString VARCHAR2(100):='as12df34sdg345apl8976gkh4f11öjhöh678u7jgvj';
newvar OWA.vc_arr;
BEGIN
FOR n IN 1..3
LOOP
newvar(n) := SUBSTR(numberInsideString, 1, 1+pos);
pos := pos+5;
Dbms_Output.Put_Line(newvar(n));
END LOOP;
END;
/
a
as12df
as12df34sdg
I need to construct a matrix; a number of columns and rows are also in the first row of the matrix, I'll make an example so its more clearer.
4 3
1 2 3
5 6 7
9 10 8
1 11 13
Where m=4 (number of rows) and n=3 (number of columns)
This is an example of a text file. Is something like this even possible?
Program Feb;
const
max=100;
type
Matrix=array[1..max,1..max] of integer;
var datoteka:text;
m,n:integer;
counter:integer;
begin
assign(datoteka,'datoteka.txt');
reset(datoteka);
while not eoln(datoteka) do
begin
read(datoteka, m);
read(datoteka, n);
end;
repeat
read eoln(n)
until eof(datoteka)
write (m,n);
end.
My code isn't a big help, cause I don't know how to write it.
First, have a look at the code I wrote to do the task, and then look at my explanation below.
program Matrixtest;
uses
sysutils;
var
NoOfCols,
NoOfRows : Integer;
Source : TextFile;
Matrix : array of array of integer;
FileName : String;
Row,
Col : Integer; // for-loop iterators to access a single cell of the matrix
Value : Integer;
begin
// First, construct the name of the file defining the matrix
// This assumes that the file is in the same folder as this app
FileName := ExtractFilePath(ParamStr(0)) + 'MatrixDef.Txt';
writeln(FileName); // echo it back to the screen so we can see it
// Next, open the file
Assign(Source, FileName);
Reset(Source);
read(Source, NoOfRows, NoOfCols);
writeln('Cols: ', NoOfCols, 'Rows: ', NoOfRows);
SetLength(Matrix, NoOfCols, NoOfRows);
readln(source); // move to next line in file
// Next, read the array data
for Row := 1 to NoOfRows do begin
for Col := 1 to NoOfCols do begin
read(Source, Value);
Matrix[Col - 1, Row - 1] := Value;
end;
end;
// Display the array contents
for Row := 1 to NoOfRows do begin
for Col := 1 to NoOfCols do begin
writeln('Row: ', Row, ' contents', Matrix[Col - 1, Row - 1]);
end;
end;
Close(Source); // We're done with the file, so close it to release OS resources
readln; // this waits until you press a key, so you can read what's been displayed
end.
In your program, you can use a two-dimensional array to represent your matrix. Free Pascal supports multi-dimensional arrays; see https://wiki.lazarus.freepascal.org/Multidimensional_arrays for more information.
This is a complex task, so it helps to know how to do more basic things like reading an array of a size known at compile-time from a text file.
The wrinkle in this task is that you are supposed to read the dimensions (numbers of rows and columns) of the matrix at run-time from the file which contains the matrix's contents.
One inefficient way to do this would be to declare the matrix array with huge dimensions, larger than anything you would expect in practice, using the type of array declaration in the Wiki page linked above.
A better way is to use dynamic arrays, whose dimensions you can set at run-time. To use this, you need to know:
How to declare a dynamic array in Free Pascal
How to set the dimensions of the array at run-time, once you've picked them up from your matrix-definition file (hint: SetLength is the way to do this)
The fact that a Free Pascal dynamic array is zero-based
The easiest way of managing zero-based arrays is to write your code (in terms of Row and Column variables) as if the matrix were declared as array[1..NoOfRows, 1..NoOfColumns] and subtract one from the array indexes only when you actually access the array, as in:
Row := 3;
Column := 4;
Value := Matrix[Row - 1, Column - 1];
How would i go about creating a procedure that is a thread which continuously passes automatic random generated data within a specified range.
I currently would have to manually enter in each bit of data in the console using this procedure below. I want to creatre a procedure that when running is able to pass data to this procedure as if it was being typed into the console itself.
procedure Analyse_Data is
Data : Integer;
begin
DT_Put_Line("Data input by user");
loop
DT_Get(Data,"Data must be taken as a whole number");
exit when (Data >=0) and (Data <= Maximum_Data_Possible);
DT_Put("Please input a value between 0 and ");
DT_Put(Maximum_Data_Possible);
DT_Put_Line("");
end loop;
Status_System.Data_Measured := Data_Range(Data);
end Analyse_Data;
I havent included the specification files (.ads)
I am new to Ada and any help would be appreciated.
Use an instance of Discrete_Random to generate some number of random data values in the desired range:
subtype Valid_Range is Natural range 0 .. Maximum_Data_Possible;
package Some_Value is new Ada.Numerics.Discrete_Random(Valid_Range);
G : Some_Value.Generator;
…
procedure Generate is
N : Valid_Range;
begin
for I in 1 .. Count loop
N := Some_Value.Random(G);
Put(N);
end loop;
end;
Save the values to a file:
./generate > test_data.txt
Feed that file to your program using I/O redirection from the command line:
./analyse_data < test_data.txt
The exact details will depend on you actual program. See this related Q&A regarding empty lines in standard input.
I'm very new to Pascal and still learning much. I have to write a code that :
Takes input of a string
Split the string into two characters each (Snippet)
Use the Snippet to get an index from an array
Transpose the Snippet to a certain value
If Index + Transpose is larger than the length of the Array, return nothing
If not, append the transposed Snippet to a result string
Return the transposed string
I can only write 1 through 3, the rest is still a blur for me. Helps are appreciated.
(And I also want to improve it without many for loops. Any thoughts?)
program TransposeString;
var
melody : Array[1..24] of String[2] = ('c.', 'c#', 'd.', 'd#', 'e.', 'f.', 'f#', 'g.', 'g#', 'a.', 'a#', 'b.', 'C.', 'C#', 'D.', 'D#', 'E.', 'F.', 'F#', 'G.', 'G#', 'A.', 'A#', 'B.');
songstring, transposedstring : String;
transposevalue : byte;
function Transpose(song : String; transposevalue : byte): String;
var
songsnippet : String[2];
iter_song, iter_index, index : byte;
begin
for iter_song := 1 to length(song) do
begin
if iter_song mod 2 = 0 then continue;
songsnippet := song[iter_song] + song[iter_song + 1]; //Split the string into 2 characters each
for iter_index := 1 to 24 do
begin
if melody[iter_index] = songsnippet then
begin
index := iter_index; //Get Index
break;
end;
end;
//Check Transpose + Index
//Transpose Snippet
//Append Snippet to Result String
end;
end;
begin
readln(songstring);
readln(transposevalue);
transposedstring := transpose(songstring, transposevalue);
writeln(transposedstring);
end.
As a starter for you to work from, rather than just spoon-feeding an answer:
You have the index of the snippet (note) in index. Assuming the notes are in order you need to return the note from the array positions above it, so
result := result + melody[iter_index + transposevalue];
You need to check the length of the array before trying to read from it, otherwise it'll crash (step 5). This is just an if statement.
I wouldn't worry too much about for loops - 2 deep nesting isn't that bad. If you wanted to split it out a bit then GetTransposedNote(const note:string): string; could be split out as a new function.
Things you may want to think about are:
What if you can't find the note in the array?
Do you want to be case-sensitive
What if the input string has an odd number of characters?
You are most of the way there already, though.
This snippet not only causes a runtime error, it makes FPC close if I run it using the debugger.
procedure sortplayersbyscore(var vAux:tplayers);
procedure swap(var a:trplayers;var b:trplayers);
var
rAux:trplayers;
begin
rAux:=a;
a:=b;
b:=rAux;
end;
var
i,j:integer;
sorted:boolean;
begin
vAux:=playersarray;
i:=1;
sorted:=false;
while (i <= MAXPLAYERS -1) and not sorted do
begin
j:=1;
sorted:=true;
while (j <= MAXPLAYERS -i) do
begin
if (vAux[j].score < vAux[j+1].score) then
begin
swap(vAux[j],vAux[j+1]);
sorted:=false;
end;
inc(j);
end;
inc(i);
end;
end;
The code itself is part of a really big source file, I can post the whole thing but the responsible for the error is just that bunch of lines. The debugger terminates at line:
swap(vAux[j],vAux[j+1]);
tplayers is just a type defined as an array of records that contain score (an integer) among a bunch of other variables. trplayers is the type of the aforementioned records. I'm at a total loss; FPC (while not under debugging mode) spits an out-of-range error but under my watches I see that the variables I'm trying to read exist. Any help is really appreciated!
rAux:trplayers; have you typed a wrong symbol or the type here really contains "r" in its name?
It looks valid (other than typos) ... so let's try something simple.
What's the value of "j" when you abort?
If the debugger won't tell you, try adding:
writeln ('j = ', j);
just before the "swap" call.
As Yochai's question implied, your array needs to be dimensioned at least from
1 (or lower) to MAXPLAYERS (or larger). (I.e.: 0..MAXPLAYERS-1 would not work,
but 1..MAXPLAYERS should.)