How would i go about creating a procedure that is a thread which continuously passes automatic random generated data within a specified range.
I currently would have to manually enter in each bit of data in the console using this procedure below. I want to creatre a procedure that when running is able to pass data to this procedure as if it was being typed into the console itself.
procedure Analyse_Data is
Data : Integer;
begin
DT_Put_Line("Data input by user");
loop
DT_Get(Data,"Data must be taken as a whole number");
exit when (Data >=0) and (Data <= Maximum_Data_Possible);
DT_Put("Please input a value between 0 and ");
DT_Put(Maximum_Data_Possible);
DT_Put_Line("");
end loop;
Status_System.Data_Measured := Data_Range(Data);
end Analyse_Data;
I havent included the specification files (.ads)
I am new to Ada and any help would be appreciated.
Use an instance of Discrete_Random to generate some number of random data values in the desired range:
subtype Valid_Range is Natural range 0 .. Maximum_Data_Possible;
package Some_Value is new Ada.Numerics.Discrete_Random(Valid_Range);
G : Some_Value.Generator;
…
procedure Generate is
N : Valid_Range;
begin
for I in 1 .. Count loop
N := Some_Value.Random(G);
Put(N);
end loop;
end;
Save the values to a file:
./generate > test_data.txt
Feed that file to your program using I/O redirection from the command line:
./analyse_data < test_data.txt
The exact details will depend on you actual program. See this related Q&A regarding empty lines in standard input.
Related
i have a function that puts a number in a var (var1). if var1 = 3 then create 3 new variables and assign a value for later send that values in an out type. I don't know how can i do, my code is something like this where "pos" acts like an INSTR() that i know its each 13 chars. And "newvar||var1" is because i want my vars names be newvar1, newvar2, newvar3, etc.:
FOR n IN 1..var1
LOOP
pos NUMBER(4):= 0;
newvar||var1 NUMBER(3);
newvar||var1 := SUBSTR(TO_NUMBER(numberInsideString), 1, 1+pos);
pos := pos+13;
END LOOP;
My question is, how a person who really know PLSQL would do that, im learning PLSQL please help. thank you.
What you want to try to do suggests that you need a one dimensional array in order repeatedly to assign new values for each iteration within the loop. One of the types in OWA package such as vc_arr(composed of VARCHAR2 data type values) is handy to define an array.
Coming to the code, you can start with moving the variables into the declaration section, and write such a simple code as a sample exercise
SET serveroutput ON
DECLARE
pos INT := 0;
numberInsideString VARCHAR2(100):='as12df34sdg345apl8976gkh4f11öjhöh678u7jgvj';
newvar OWA.vc_arr;
BEGIN
FOR n IN 1..3
LOOP
newvar(n) := SUBSTR(numberInsideString, 1, 1+pos);
pos := pos+5;
Dbms_Output.Put_Line(newvar(n));
END LOOP;
END;
/
a
as12df
as12df34sdg
I am currently doing the Ada tutorial from learn.adacore.com, and I am now at the second example: reading and outputting an integer. Since copy-pasting is for people who don't want to learn the syntax, I manually typed out most of the code (Some of it was generated by gnat-gps, but I'm now using vim).
I compiled and ran the program, and surprisingly, the second line of output is indented by roughly one tab. Why?
Here's the code:
With Ada.Text_IO;
Use Ada.Text_IO;
With Ada.Integer_Text_IO;
use Ada.Integer_Text_IO;
procedure Main is
N : Integer;
begin
-- Insert code here.
Put("Enter an integer value: ");
Get(N);
if N>0 then
Put (N);
Put_Line(" is a positive number");
end if;
end Main;
(how do I get syntax highlighting?)
Here is a sample of the output (the first 1 being input):
Enter an integer value: 1
1 is a positive number
The Put procedure from Ada.Integer_Text_IO uses a default field width padded with spaces.
The specification for that procedure is defined in the Ada Language Reference Manual as:
procedure Put(Item : in Num;
Width : in Field := Default_Width;
Base : in Number_Base := Default_Base);
The Width and Base parameters are given default values. Your call to Put only supplied a value for the formal parameter Item. To eliminate the left padding simply specify a desired width. I suggest you use Ada named notation for the call as in
Put(Item => N, Width => 1);
I need to construct a matrix; a number of columns and rows are also in the first row of the matrix, I'll make an example so its more clearer.
4 3
1 2 3
5 6 7
9 10 8
1 11 13
Where m=4 (number of rows) and n=3 (number of columns)
This is an example of a text file. Is something like this even possible?
Program Feb;
const
max=100;
type
Matrix=array[1..max,1..max] of integer;
var datoteka:text;
m,n:integer;
counter:integer;
begin
assign(datoteka,'datoteka.txt');
reset(datoteka);
while not eoln(datoteka) do
begin
read(datoteka, m);
read(datoteka, n);
end;
repeat
read eoln(n)
until eof(datoteka)
write (m,n);
end.
My code isn't a big help, cause I don't know how to write it.
First, have a look at the code I wrote to do the task, and then look at my explanation below.
program Matrixtest;
uses
sysutils;
var
NoOfCols,
NoOfRows : Integer;
Source : TextFile;
Matrix : array of array of integer;
FileName : String;
Row,
Col : Integer; // for-loop iterators to access a single cell of the matrix
Value : Integer;
begin
// First, construct the name of the file defining the matrix
// This assumes that the file is in the same folder as this app
FileName := ExtractFilePath(ParamStr(0)) + 'MatrixDef.Txt';
writeln(FileName); // echo it back to the screen so we can see it
// Next, open the file
Assign(Source, FileName);
Reset(Source);
read(Source, NoOfRows, NoOfCols);
writeln('Cols: ', NoOfCols, 'Rows: ', NoOfRows);
SetLength(Matrix, NoOfCols, NoOfRows);
readln(source); // move to next line in file
// Next, read the array data
for Row := 1 to NoOfRows do begin
for Col := 1 to NoOfCols do begin
read(Source, Value);
Matrix[Col - 1, Row - 1] := Value;
end;
end;
// Display the array contents
for Row := 1 to NoOfRows do begin
for Col := 1 to NoOfCols do begin
writeln('Row: ', Row, ' contents', Matrix[Col - 1, Row - 1]);
end;
end;
Close(Source); // We're done with the file, so close it to release OS resources
readln; // this waits until you press a key, so you can read what's been displayed
end.
In your program, you can use a two-dimensional array to represent your matrix. Free Pascal supports multi-dimensional arrays; see https://wiki.lazarus.freepascal.org/Multidimensional_arrays for more information.
This is a complex task, so it helps to know how to do more basic things like reading an array of a size known at compile-time from a text file.
The wrinkle in this task is that you are supposed to read the dimensions (numbers of rows and columns) of the matrix at run-time from the file which contains the matrix's contents.
One inefficient way to do this would be to declare the matrix array with huge dimensions, larger than anything you would expect in practice, using the type of array declaration in the Wiki page linked above.
A better way is to use dynamic arrays, whose dimensions you can set at run-time. To use this, you need to know:
How to declare a dynamic array in Free Pascal
How to set the dimensions of the array at run-time, once you've picked them up from your matrix-definition file (hint: SetLength is the way to do this)
The fact that a Free Pascal dynamic array is zero-based
The easiest way of managing zero-based arrays is to write your code (in terms of Row and Column variables) as if the matrix were declared as array[1..NoOfRows, 1..NoOfColumns] and subtract one from the array indexes only when you actually access the array, as in:
Row := 3;
Column := 4;
Value := Matrix[Row - 1, Column - 1];
i had a problem when i am using dbms_output package. When i am executing the following code it display integer is 0
declare
v integer;
asq dbms_output.chararr;
begin
dbms_output.put('hi');
dbms_output.put_line('hello!');
asq(1):='sun';
asq(2):='ant';
dbms_output.put_line(asq(1));
dbms_output.put_line(asq(2));
dbms_output.get_lines(asq,v);
dbms_output.put_line('integer is '||v);
end;
but when i am executing the following code i am getting integer is 3
declare
v integer:=5;
asq dbms_output.chararr;
begin
dbms_output.put('hi');
dbms_output.put_line('hello!');
asq(1):='sun';
asq(2):='ant';
dbms_output.put_line(asq(1));
dbms_output.put_line(asq(2));
dbms_output.get_lines(asq,v);
dbms_output.put_line('integer is '||v);
end;
can any one help me why the variation is there in the two procedures
As per documentation, the second parameter to GET_LINES
procedure is IN OUT parameter. It tells the procedure, number of lines to be retrieved from buffer. After the procedure call, it holds number of lines actually retrieved.
In your first example, the value of v is null. So no lines are retrieved and v is assigned the value 0.
In your second example, the value if v is 5. So you are requesting 5 lines, but since there are only three lines(hihello!, sun, ant), three lines are put into array asq and v is assigned 3.
This snippet not only causes a runtime error, it makes FPC close if I run it using the debugger.
procedure sortplayersbyscore(var vAux:tplayers);
procedure swap(var a:trplayers;var b:trplayers);
var
rAux:trplayers;
begin
rAux:=a;
a:=b;
b:=rAux;
end;
var
i,j:integer;
sorted:boolean;
begin
vAux:=playersarray;
i:=1;
sorted:=false;
while (i <= MAXPLAYERS -1) and not sorted do
begin
j:=1;
sorted:=true;
while (j <= MAXPLAYERS -i) do
begin
if (vAux[j].score < vAux[j+1].score) then
begin
swap(vAux[j],vAux[j+1]);
sorted:=false;
end;
inc(j);
end;
inc(i);
end;
end;
The code itself is part of a really big source file, I can post the whole thing but the responsible for the error is just that bunch of lines. The debugger terminates at line:
swap(vAux[j],vAux[j+1]);
tplayers is just a type defined as an array of records that contain score (an integer) among a bunch of other variables. trplayers is the type of the aforementioned records. I'm at a total loss; FPC (while not under debugging mode) spits an out-of-range error but under my watches I see that the variables I'm trying to read exist. Any help is really appreciated!
rAux:trplayers; have you typed a wrong symbol or the type here really contains "r" in its name?
It looks valid (other than typos) ... so let's try something simple.
What's the value of "j" when you abort?
If the debugger won't tell you, try adding:
writeln ('j = ', j);
just before the "swap" call.
As Yochai's question implied, your array needs to be dimensioned at least from
1 (or lower) to MAXPLAYERS (or larger). (I.e.: 0..MAXPLAYERS-1 would not work,
but 1..MAXPLAYERS should.)