I just released a game to the app store and realized I completely forgot to lock it to portrait only. I need to submit an updated version that does just that. At this point, is it enough to just go to general > deployment info and uncheck everything but Portrait and then submit this as a new build? Or do I also need to do something to the code? Please note that it's a swift app.
Simple.
Here's how you do it.
This works for both objective c and swift.
1. Open your project and go do your build settings.
Scroll down to the tab that says Deployment Info.
3. From there you can see a section called Device Orientation, This is where you need to be. Select an orientation like so.
4 Build the project and you are done!
Go to your info.plist file, Supported interface orientations, delete the keys you don't need.
There are two different plist keys for iOS in info.plist for orientation,
Supported Device Orientations
Supported Device Orientations (iPad)
Both of these must have the appropriate key value pairs in the plist.
The basic answer is: yes, that should be sufficient.
However:
Some elements of your application might not adapt well. I know I had problems with the UIImagePickerController for a landscape-only app. So watch out for functionality that you yourself haven't written and how that interacts with the restriction.
If you have code related to orientation (pushing a certain mode etc) it's probably worth testing.
You should make the change and test it before submitting. I think there may be ways of holding the release with Apple until you've had the portrait only one approved.
Related
I'm working on a small macos app, which I'm building with storyboards/interface builder in Xcode 10.2.1 on MacOS 10.14.5 (though I've set a deployment target of 10.13, if that matters).
When I run the app within Xcode, i.e., by hitting the "play" button, it loads up just fine and is visible and operates.
However, when I "archive" it to a freestanding executable and then try to run the app from the hard drive, it opens up on a blank screen. (See screenshots below.)
I've cleaned the build folder. I've also made sure to clear any/all build warnings and autolayout constraint warnings.
Here it is, running perfectly fine within xcode:
And here it is, displaying nada when run on its own:
The app uses no third-party libraries, no bundle assets, and only has one ViewController---nothing fancy at all happening here. The only weird UI thing that I'm doing is that there's a very small webview in the bottom-right corner that I'm using as a hack to load js-based web content (the mysterious white dot in the working screenshot).
Ok, I figured this one out myself, so for the purposes of google/if someone else has this problem: there seems to be a bug in WKWebView of some kind, adding it to IB kills everything else in the view. (Or maybe this is intended, and WKWebView requires it's own independent view? Dunno.)
The solution is to create it programmatically and never put it in the view at all. You can still load web content in the background, scrape information from pages, etc. without it ever being part of a view.
Not only WKWebView, also AVPlayerView should not placed int IB, too.
it cause same result.
I have previously used MyBlurIntroductionView library for presenting walkthroughs of my app but the problem is it is buggy on iPhone X -- the content gets cut off by the notch on iPhone X. The library has not been updated for years so I need something that works on iPhone X. I am not sure if it a problem with setup of UIPageControl. Any inputs to fix it or an alternative library that is better for presenting walk through tutorials on iOS?
Firstly on MYBlurIntroductionView, Launch screen is missing add it by
Xcode-> NewFile-> LaunchScren
Assign it on your target
Output
Since MyBlurIntroductionView is very old source project you have to provide constraints
with respective to safe area(see here)
Just curious - is it possible to change the color/design of elements in storyboard and see them reflected on the app that is running?
For example, changing the background color of a label, and then seeing that result on my iPhone (assuming Xcode is currently running the app) WITHOUT rebuilding the whole app?
You want to see changes made in your source reflected in the application running on your device, without having to rebuild and deploy the app (I think). If so, you cannot do that at this time using Xcode and iOS.
I keep getting this error when I try to submit my app to the store using Xcode:
ERROR ITMS-90475: "Invalid Bundle. iPad Multitasking support requires launch storyboard in bundle 'com.companyname.appname.'"
Anyone know what this error really means?
This is because you need to specify how your app is supposed to handle multitasking on iPad.
If you don't want to handle multitasking right now, you can simply disable it by going to the "General" tab of your target:
I solved the problem in this way, see here:
If you must opt out of Slide Over and Split View, do so explicitly by adding the UIRequiresFullScreen key to your Xcode project’s Info.plist file and apply the Boolean value YES.
You need to add a Launch Screen (Xcode > File > New).
Under iOS > User Interface you select "Launch Screen" to add it to the project.
For the iPad you need to support all 4 orientations.
Select in Xcode your target file, and under the General Tab, go to the "App icons and Launch Images".
Here you select the Launch Screen file you created.
When you launch the app you'll see the launch (bitmap) images are not used, but the Launch Screen Storyboard.
You can either do it as André showed or directly add:
<key>UIRequiresFullScreen</key>
<true/>
On your .plist file.
If you are using Cordova, you might want to use the cordova-ios-requires-fullscreen plugin (see How to disable iOS9 multitasking through Ionic/Cordova?)
Update: you can also use the cordova-plugin-ipad-multitasking, which seems to also prevent another issue (ITMS-90474)
Update: this should now be fixed using Cordova tools 5.4 without the need for these plugins.
In Xcode 14.2, setting the launch storyboard should be as simple as selecting the required storyboard as Launch Screen File in the "General" settings for the target. This not only avoids spelling mistakes, it also ensures that the storyboard is included in the bundle. However, I found that uploading to the App Store failed as per the OP if support for multiple windows is included (that is, if requires full screen is not checked).
If the storyboard has been configured in this way then the problem may be because the name of the storyboard includes a .storyboard extension, which it's not supposed to (see also post by Muhammad Ibrahim). This can be fixed without checking the box for requires full screen:
In Xcode, go to your build target and select the General tab.
In the section "App Icons and Launch Screen", check if a Storyboard file is selected and if it has a .storyboard extension.
If so -> tap the name of the storyboard to edit it, take off the .storyboard extension and press return.
That's it! The name of the storyboard will no longer show, but the problem will be fixed.
IF you ONLY want to set RequiresFullScreen For iPhone, and support iPad Multitasking, try this:
<key>UILaunchStoryboardName~ipad</key>
<string>LaunchScreenIPad.storyboard</string>
<key>UIRequiresFullScreen</key>
<true/>
<key>UIRequiresFullScreen~ipad</key>
<false/>
LaunchScreenIPad.storyboard is the name of LaunchScreen for iPad.
iPhone will still use Launch Images Source pictures.
Apple Document Ref: Creating Platform- and Device-Specific Keys
If you want to support split views in iPad, in your info.plist file, set just "LaunchScreen" as the value for key "UILaunchStoryboardName", instead of "LaunchScreen.Storyboard" and you need to support all 4 orientations for iPad.
Ok. So I have iPad app in Xcode 4.2 targeted for iOS 5.1. I provided it with launch images for both landscape and portrait modes and it has some serious trouble with using them properly.
First in landscape mode it shows proper landscape image but rotated by 90 degrees CW and cropped on the right side. Then when it starts to display it properly but does it also in portrait mode (as if it doesn't recognize portrait mode at all anymore).
I've seen some suggestions like providing portrait image with rotated content for landscape mode, etc. but the problem is I can't for the life of me make xCode use both images in right moments.
Is there some voodoo for that? Like setting them in proper order, use plist directly or the slots in GUI, putting them in some special directory or two different directories, I don't know - anything? Fighting xCode over such things will make me puke with blood one day...
Ok, one thing to know is that xCode seems to be very capricious when it comes to updating settings, resources etc. I deleted references to the launch images from the project, cleaned the product in xCode and removed the app from simulator but it still somehow managed to use the launch images even though it didn't show copying the images in build log.
I'm not sure if it took the pictures from derived data or what but I had to delete derived data and remove the images manually from the app bundle in ~/Library/Application\ Support/iPhone\ Simulator/5.1/Applications/ to make it stop. Then I pasted the images manually into the app bundle and now after publishing both images work properly in the simulator ignoring the fact that I didn't set them up at all in xCode!
I'm still not sure how to proceed with the device version - it obviously doesn't have the launch images now...
Apparently xCode doesn't care at all about setting anything about the launch images apart from including properly named images in the project so they get copied to the bundle. As I wrote above you can even inject the images into the app bundle and it still works.
The other side is that once you get the images there it may by hard to get rid of them.
So anyway now I have nothing in my plist about the images, nor anything in the slots in the Target Info and I have four working launch images in my app (both orientations and retina).
Hope it helps someone sometime..