I created a user in weblogic by following the below steps:
1. clicked on security realams present on left side panel.
2. clicked on myrealam
3. clicked on user and groups
4. clicked on new
5. Provided user name and password
The user created successfully. However when I am starting the server by deleting the log,cache, tmp and data folder. The created user is getting deleted automatically.
From my first level analysis I found its due to the deletion of data folder.
I want to create a permanent user for security validation.
Can anyone Please help me to create a permanent user.
Regards
Asutosh Kar
I got the answer to solve my above issues.
There are 2 ways to solve the above issue:
1. Export the LDAP files from the security realms to a directory present in the server and delete the data directory and restart the server. After restart of the server again import the LDAP files.
2. Modify the DefaultAuthenticatorInit.ldift present under the domain security directory to add the user and group details. After that delete the data directory and restart the server.
Regards
Asutosh Kar
I tried following and it works
Login to weblogic console.
Navigate to domain.
Under domain , security tab > Embedded LDAP
Select Master First and then restart servers.
The users created after restart will remain in the system
Related
I have a simple etcd server running and I am using this github project called etcd-keeper to visualize the data in the etcd.
you can find the etcd-keeper project here: https://github.com/evildecay/etcdkeeper
I have created the root using etcdctl and everything works fine.
And I needed to create a another user that has limited view access. So, I created another test-user user and added read-only role with relevant persmissions.
Everything is good but, when I try to access the etcd server using etcd-keeper it doesn't allow me to log in with the test-user credentials unless I signed in with root user first
I don't need to share the root user credentials with the person logs with test-user. Otherwise no point in creating a new user noh.
I get this warning as below:
Can someone please help me to fix this problem? Is this error from etcd servr side? Anyone has used this etcd-keeper before?
Thank you.
I am facing error in nopcommerce 3.90 when run the project at that also at sometimes it is working good but after sometimes it shows the error of "no database instance". I am surprised it shows this type of error. Because the normal thing I have done to run the nopcommerce project.
I have done these things:
set the setting file by installation of nopcommerce.
delete the bin folder of nopcommerce.
clean the solution and rebuild it.
But still facing the same issues.
"no database instance" this type of error occures when the Nopcommerce is not able to connect with the database. If you have created database locally then try to find SQL service and restart the service. But if you are having database being hosted on any other server then check you network connection.
There are some of summery solution that i have mention as below
=> Since i had moved a live cart to a test server, the settings in the database for that cart had force ssl and also force www before any url. Also under Store settings i still had the domain info for that site which was now difrent in the test server. Once i noticed this and updated the database it all started working.
=>
You try change settings.txt file:
DataConnectionString: Data Source=localhost/IP;Initial Catalog=DBName;Integrated Security=False;Persist Security Info=False;User ID=DBUser;Password=DBPass;MultipleActiveResultSets=True
=>
In my case I need config application pool for nopcomerce
my connection string
DataProvider: sqlserver
DataConnectionString: Data Source=.;Initial Catalog=nopcommerce370;Integrated Security=True;Persist Security Info=False
I need set Application Pool Identity to user has access right to db
Check the image to details.
=> Check also db permission.
=> try with
Data Source=9X.2XX.7X.XX\"yoursqlservenameinstance"
or
Data Source="yournamemachine"
or
Data Source="yournamemachine"\"yoursqlservenameinstance"
You can do some thing like
Check setting file on App_data existing or not
Check connectionstring is correct or not
Check your SQL server working or stop by try connect
Clear cache your browser
Try This ``
Right click on the downloaded file (nopCommerce_3.40_Source.rar) ->select properties -> press "Unblock".
and
and change connection string in Settings.txt file.
When I tried to connect to the navigator web administration, I receive a message "The desktop can not be opened" and It require defining a desktop ID.
http://imgur.com/JNKelPy
How to fix this problem or define a desktop ID?
I can't remember if after an installation default desktop is admin or if you have to set it manually. Is your URL with ?desktop=admin at the end working (https://ecm.filenet.com:9443/navigator/?desktop=admin)? If it does, create a desktop and set it as default. If it doesn't, you should take a look at the WAS log (SystemOut.log) to see what the error is.
After successful deployment of IBM Content Navigator, the admin desktop is automatically created. It is considered the default desktop until another is created with a valid repository. If you have issues, you should put in the full admin console address:
http://www.ICNADDRESS.com:9080/navigator/?desktop=admin
The desktop selection code at the end (?desktop=) can be used to specifically go to any desktop in the configuration, but the code treats the admin console address shown above as "special" for authentication and processes it slightly differently. I've had normal desktop configurations (especially after upgrades from 2.0.1 & 2.0.2) have issues for administrative users.
IBM Content Navigator uses DB tables for it's configuration data. You can find the desktop related info in a table named CONFIGMGMT including admin desktop.
There are server possibilities for the error that you are getting
CONFIGMGMT table has corrupted data regarding admin desktop.
CONFIGMGMT table has been deleted.
The DB table is accessed by Content Navigator via data source created in your application server and the connection to the underlying database is not made due to authentication issues(very common due to password change policies).
I am getting error "CWWIM4538E Multiple principals were found" at server startup. I know the cause as the local WAS admin account has its duplicate in LDAP repository. I simply wants to remove the local WAS user gracefully offline as server won't come up. I tried playing around with changing the user id info in fileregistry.xml and corresponding change in security.xml but to no avail.
Seems that you've added LDAP into "federated repositories" and forgot to remove "internalFileRepository" which contains wasadmin as well. You can do it in profiles/dmgr/config/cells/myCell/wim/config/wimconfig.xml, where you just remove it from the realm.
I'm developing a site on an XAMPP localhost on a Mac. I manipulate my mySQL database via phpMyAdmin (not comfortable with the command line).
Everything works fine (I know, right!).
2 things have got me worried for when I eventually move my site to a real online live server.
First the background:
1) I am using a CMS/Framework type thing. When trying to install it (in the htdocs folder), I found that I needed to write-enable some folder or the other (FileSystem permissions in Finder). So I write-enabled all the folders contained in the mother folder. Mac's have 3 default types of users (right-click a folder in Finder and choose info). They are "Me", "admin" and "everyone". I right-clicked the mother folder (in Finder), selected "Read&Write" for all 3 types of users, and chose "Apply to enclosed items." And the installation worked out fine.
2) I am able to come and go as I please into phpMyAdmin to directly manipulate my database. I presume phpMyAdmin recognizes me as Root. I do not have a password for Root. I do have a separate user created with a password (let's call the user "specificdbuser") and I use "specificdbuser" to connect to the database from within my site's PHP code.
My concerns regarding 1 & 2 are:
1) I'm presuming that enabling Read&Write permissions for all 3 types of users, and in particular for all folders and items within the mother folder, is a security risk. Is there a better way? (a) How do I figure out which folders need to be writeable so that I only make those writeable instead of making everything writeable?, and (b) Instead of giving Read&Write permissions to the 3 default Mac user types, should I instead be creating some new type of user (Root? specificdbuser?) and only give that user permission to Read&Write permissions? As this is a website, do I need to give "everyone" permission to Read&Write? What the heck does "everyone" mean anyway?
2) Let's say I eventually set up my database's Root account with a password. When I eventually migrate my localhost site to a real live online server, will this Root / password combination work on that site too?
I'm kind of confused, are you talking about FileSystem permissions or MySQL Database permission? If it is a FileSystem question, then please check the web service user that runs your PHP scripts. If it's a database permission, then please refer to #2 answer.
I would say, for security reason never use the "root" when connecting to your database. I would suggest you setup the same user name/password/permissions on your local and in server. But if that doesn't make sense you can have a config file that says if "localhost" then db_user = blah_blah, else if server side db_user = blah.