When I tried to connect to the navigator web administration, I receive a message "The desktop can not be opened" and It require defining a desktop ID.
http://imgur.com/JNKelPy
How to fix this problem or define a desktop ID?
I can't remember if after an installation default desktop is admin or if you have to set it manually. Is your URL with ?desktop=admin at the end working (https://ecm.filenet.com:9443/navigator/?desktop=admin)? If it does, create a desktop and set it as default. If it doesn't, you should take a look at the WAS log (SystemOut.log) to see what the error is.
After successful deployment of IBM Content Navigator, the admin desktop is automatically created. It is considered the default desktop until another is created with a valid repository. If you have issues, you should put in the full admin console address:
http://www.ICNADDRESS.com:9080/navigator/?desktop=admin
The desktop selection code at the end (?desktop=) can be used to specifically go to any desktop in the configuration, but the code treats the admin console address shown above as "special" for authentication and processes it slightly differently. I've had normal desktop configurations (especially after upgrades from 2.0.1 & 2.0.2) have issues for administrative users.
IBM Content Navigator uses DB tables for it's configuration data. You can find the desktop related info in a table named CONFIGMGMT including admin desktop.
There are server possibilities for the error that you are getting
CONFIGMGMT table has corrupted data regarding admin desktop.
CONFIGMGMT table has been deleted.
The DB table is accessed by Content Navigator via data source created in your application server and the connection to the underlying database is not made due to authentication issues(very common due to password change policies).
Related
We have a windows application which is written by electron and SQLite as database, the problem is we want our application to secure the database file after its first authentication with database, and only have the application itself can modify the file, while preventing the windows standard user from modifying or deleting the file manually. What are the options here?
You can use third-party applications like https://robotronic.de/runasspcen.html
Run application as another user or start program as administrator from a limited account like the command runas, but without to enter login information on each start.
All,
I have no idea how Windows service works, just curious when we register a windows service(such as auto run a server after reboot), if it requires a user profile to load info(such as pulling data from somewhere else), what user profile does it load?
Thanks,
You can select what user run each service registered and the system comes with users assigned per service. The most used by the system is SYSTEM.
To check this you have to:
Go to services.
Right click on the desired service and properties.
Go to the Log on tab and check.
If the Local System account is selected the username is SYSTEM which has special permissions on almost all folder and Windows sections including users' profiles data.
By the other hand if you would like to do something special with an specific account you can tell the system the service will start with the account specified. Just make sure to update the password information every time the user change it.
Regards,
Luis
I'm working on a tool that generates .rdp files and then invokes them using Microsoft RDP Client. This tool is running on Mac OS.
Everything works well, the only problem is that I can't figure out of how I can generate 'password 51:b' field properly. On Windows this can be done easily by using CryptProtectData method from Crypt32.dll library. How can I do the same on Mac.
Another option could be to use "rdp://" URL scheme, but it doesn't seem allow to pass password this way.
So the question is how can I implement auto-login on Mac if I use third-party RDP client.
As far as i know you can't. You can however create a "User Account" and a Server configuration and add both to the client. The connection will then be visible on the main window and you just need to double click it.
To do so, you need to add the password to the Keychain, use /usr/bin/security to do so from a script. It needs to be a generic-password and saved in com.microsoft.rdc.macos. Also be sure to generate an ID according to the RDP Clients scheme, like BFF77777-7777-7777-7777-777777777777.
You may also set the permissions to read that key using /usr/bin/security and set-generic-password-partition-list specifying the right teamid (UBF8T346G9) and again com.microsoft.rdc.macos. You need the admin password to do this step.
Then you can alter the RDP Clients config file, which is a .sqlite file located at /Users/$(whoami)/Library/Containers/com.microsoft.rdc.macos/Data/Library/Application Support/com.microsoft.rdc.macos/com.microsoft.rdc.application-data.sqlite. Add the user configuration in the ZCREDENTIALENTITY table and make sure the ZID matches the one added to the keychain.
To add a server configuration you need to alter the ZBOOKMARKENTITY table. Just add a configuration by hand using the UI and look at the table to get a feeling of how it needs to be setup. Basically you link your user configuration with the server configuratio by making sure that ZCREDENTIAL in ZBOOKMARKENTITY matches Z_PK in ZCREDENTIALENTITY of your user configuration.
I know the answer is a bit late, but it may give you a starting point. This will however not fully automate the process, you will still need to go to the UI and double click the connection you want to use.
I am facing error in nopcommerce 3.90 when run the project at that also at sometimes it is working good but after sometimes it shows the error of "no database instance". I am surprised it shows this type of error. Because the normal thing I have done to run the nopcommerce project.
I have done these things:
set the setting file by installation of nopcommerce.
delete the bin folder of nopcommerce.
clean the solution and rebuild it.
But still facing the same issues.
"no database instance" this type of error occures when the Nopcommerce is not able to connect with the database. If you have created database locally then try to find SQL service and restart the service. But if you are having database being hosted on any other server then check you network connection.
There are some of summery solution that i have mention as below
=> Since i had moved a live cart to a test server, the settings in the database for that cart had force ssl and also force www before any url. Also under Store settings i still had the domain info for that site which was now difrent in the test server. Once i noticed this and updated the database it all started working.
=>
You try change settings.txt file:
DataConnectionString: Data Source=localhost/IP;Initial Catalog=DBName;Integrated Security=False;Persist Security Info=False;User ID=DBUser;Password=DBPass;MultipleActiveResultSets=True
=>
In my case I need config application pool for nopcomerce
my connection string
DataProvider: sqlserver
DataConnectionString: Data Source=.;Initial Catalog=nopcommerce370;Integrated Security=True;Persist Security Info=False
I need set Application Pool Identity to user has access right to db
Check the image to details.
=> Check also db permission.
=> try with
Data Source=9X.2XX.7X.XX\"yoursqlservenameinstance"
or
Data Source="yournamemachine"
or
Data Source="yournamemachine"\"yoursqlservenameinstance"
You can do some thing like
Check setting file on App_data existing or not
Check connectionstring is correct or not
Check your SQL server working or stop by try connect
Clear cache your browser
Try This ``
Right click on the downloaded file (nopCommerce_3.40_Source.rar) ->select properties -> press "Unblock".
and
and change connection string in Settings.txt file.
I have user (not administrator) access to some external JMS.
I'm failing to view queue while trying to use GEMS.
My guess this is because GEMS is admin console for JMS but user I have don't have any administrator permissions.
I've made a try to create user without admin permissions on my local Tibco and I fail to connect to JMS using very user in GEMS.
How could I view any JMS with resricted user? Is GEMS able to do that? If not what tools could be used?
Thanks.
There is Hermes tool suitable for this.
It was relly hard to get Hermes working with Tibco EMS. Here is good tutorial how to configure Hermes.
HermesJMS provides a GUI to access JMS queues and topics for common tasks such as sending messages, removing messages and copying messages between queues and topics. It’s one of some “must have” tools for EMS admins and application support team.
Get the latest installer from SourceForge: http://sourceforge.net/projects/hermesjms/files/ then run it:
java -jar hermes-installer.jar
Installation is very simple, just few screens: release notes, license agreement, installation path, components (here is only one actually), summary, files copying, shortcuts creation and installation finish.
To start HermesJMS run hermes.bat in your \HermesJMS\bin. If you got error message “cannot find \bin\javaw”, make sure that you have JAVA_HOME system variable defined to your jre folder.
When Hermes started successfully, click on “Create new JMS session” button, preferences window will appear, select providers tab and right-clik on free space. Then press “Add Group” and enter group name. Right-click on “Library” and press “Add JAR(s)”. Look in \ems\5.1\lib folder and select all .jar files there. Click “Open”, then let Hermes to scan jars for factories: press “Scan” button. Then press “Apply”. All libraries will be in the list like on my screenshot.
Go to “Sessions” tab and enter name for session: “My EMS” for example, then select “EMS” loader. Next step is select “com.tibco.tibjms. TibjmsConnectionFactory” class and “Tibco EMS” plugin. Order is very important: select loader, then class, then plugin. Right-click on free space in plugin section and press “Add property”. You have to enter all three properties: username, password and serverURL, do the same for Connection Factory, then press “OK” to save and close properties window.
Now we can connect Hermes to our EMS. Let it discover queues and topics, press “Discover queues and topics from the provider” button. Then confirm replacement of the current set of destinations and list will be updated. That’s all.