Help guys in installing Laravel 5,
I'm using Windows 7 Home premium
I'm using the Git bash as my terminal
I run the command
composer global require "laravel/installer=~1.1"
And it successfully installed
But when I ran
laravel new blog
It shows the message below:
Crafting application...
'composer' is not recognized as an internal or external command, operable program or batch file.
Application ready! Build something amazing.
There's an error message "'composer' is not recognized....".
Why is this happening to me?
The composer command is working fine. :(
I've already added the path ";C:\Users\username\AppData\Roaming\Composer\vendor\bin" to my system variables
Run command install Laravel:
composer create-project laravel/laravel --prefer-dist
http://laravel.com/docs/5.0/installation
Solved! Tried to reinstall it at my office.
It seems that my internet connection at home blocks some websites and running this command
composer global require "laravel/installer=~1.1"
installed incomplete laravel installer.
Related
I have a question related to composer and laravel. My question is whenever I install the fresh laravel app using command :
composer create-project laravel/laravel blog
Inside my C://xampp/htdocs/ directory and then change path to C://xampp/htdocs/blog/, here I am unable to run the composer command but I had already installed composer from its official website globally in C://xampp/htdocs/ directory. So is there any way to use composer command globally whenever I install fresh laravel app, so that I don't want to install composer in the laravel app directory everytime.
Now I guess they provide direct setting up global installation,
Check here
I did it like this a lot earlier,
Change to the path (or you can add that directory to your path later), and run the installer as mentioned on composer download site to download composer.phar.
Create a new composer.bat file alongside composer.phar.
Using cmd.exe:
run
echo #php "%~dp0composer.phar" %*>composer.bat
Then set it to path environment variable(see this)
Test with a new terminal:
composer -V
Will return
Composer version 1.10.6 2020-05-06 10:28:10
go to composer website and download the exe file, you should have it gloablly if you install it that way.
Good luck ^_^
Already installed composer to 'C:/xampp/htdocs/crud' with cmd. However trying to install laravel via the 'composer create-project --prefer-dist laravel/laravel blog' command does not download or install anything. The 'composer global require laravel/installer' command produces the same result.
PS: don't know if it wrecks anything but, I was having trouble running the composer command at first, kept saying there is no app to open '.phar' files. I found an answer here that asked me run .phar files with php.exe by default and thats what i did.
A picture to show what happens when I run the composer commands to install laravel...
I was trying to install laravel after i installed composer and made sure it's working by typing composer on my cmd but right after i added this line on cmd i became unable to see composer command working
composer global require "laravel/installer"
Now when i type composer it does nothing just like that
And here list of the current windows variables
The problem was that there was 2 files composer.phar and composer.bat inside my user folder "C:\Users\Yasser" which opens on cmd by default when i removed these 2 files i was able to use the command composer normally thanks to Peh
I'm trying to install Laravel with composer on Windows 7 and am running into an error. This is the command I'm running:
composer global require "laravel/installer=~1.1"
This is the error I get:
file_put_contents(C:\Users\myUser\AppData\Roaming\Composer/vendor/composer/installed.json): failed to open stream: No such file or directory
It's correct to say that the installed.json file does not exist, there's not even a composer folder inside the vendor folder. Not sure why that would be missing. I installed composer using the Windows installer.
Seems to be a composer related issue rather than laravel. I just tried installing yii and am getting a similar error running this:
composer create-project --prefer-dist yiisoft/yii2-app-basic MyApp
For this one, I get this after it successfully creates the folder and seems to load most files:
file_put_contents(C:\wwwroot\MyApp/vendor/composer/installed.json): failed to open stream: No such file or directory
Seems like the problem is that I never have a composer folder in my vendor folder.
UPDATE
I was able to get laravel to install globally by adding the COMPOSER_HOME environment variable. But I still run into a similar error when setting up a Laravel project after that
UPDATE 2
Some additional info, when I use the Windows Installer, composer gets installed in c:\ProgramData\ComposerSetup\bin. If I set the COMPOSER_HOME environment variable to this, laravel can get installed globally. But trying to install a project using the "laravel new MyApp" throws the following error:
Parse error: syntax error, unexpected 'class' (T_CLASS), expecting identifier (T_STRING) or variable (T_VARIABLE) or '{' or '$' in C:\wwwroot\MyApp\artisan on line 31
I suspect that's because I have PHP 5.4 and the latest version of laravel is 5.6 and above, but I want to install 5.0, which is 5.4 and above. I tried doing it using "composer create-project laravel/laravel MyApp 5.0 --prefer-dist" instead. I get the following error:
file_put_contents(c:\wwwroot\MyApp/vendor/composer/installed.json): failed to open stream: No such file or directory
Seems there's just something weird going on with paths that I can't quite figure out.
UPDATE 3
I've now uninstalled composer and re-installed it manually per the instructions provided on the composer site. I'm now trying to create a project using the following command from c:\wwwroot:
composer create-project laravel/laravel c:\wwwroot\MyApp --prefer-dist
It does manage to install some stuff, but seems I get this error before any package it tries to install:
Installing laravel/laravel (v5.1.4)
Loading from cache
Failed to download laravel/laravel from dist: RecursiveDirectoryIterator::__construct(C:\wwwroot/vendor/composer/,C:\wwwroot/vendor/composer/): The system cannot find the path specified. (code: 3)
Again, seems like it can't create a directory for vendor/composer for some reason. I tried running the same command, but from inside an empty c:\wwroot\MyApp folder, same result except the path in the error changes accordingly.
I found the following: https://getcomposer.org/doc/articles/troubleshooting.md#-the-system-cannot-find-the-path-specified-windows-
But I checked my registry and I have none of these entries. So still no clue.
It seems that your composer is not globally accessible. Try to add C:\Users{UserName}\AppData\Roaming\Composer\vendor\bin to your environment variable then restart your Shell or Command-Prompt so that updated Path variables is loaded. Now try to install laravel again.
Here is the detailed instruction:
Go to Control Panel > Systems ans Security > System > Advanced system settings then navigate to envirinment variables then scroll down and locate the PATH then add a semi colon (;) at the end of the PATH string. This means you are declaring a new variable. Then paste the C:\Users{UserName}\AppData\Roaming\Composer\vendor\bin after (;) you have added, restart the command prompt and try to install laravel again.
Uninstall composer and install it again, but this time do enable shell menu. Right click on the location (directory) where you want to create the project, select "use composer here", then "composer create-project laravel/laravel projectName --prefer-dist" should create your laravel project, default to latest version (5.1).
To specify your prefer version:
"composer create-project laravel/laravel 4.2 projectName --prefer-dist"
I will suggest you to install Homestead (http://blog.teamtreehouse.com/laravel-homestead-on-windows) and do all the heavylifting there.
You just need to do homestead ssh to actually connect to your machine and then perform all your operations.
Windows is pretty unpredictable in that kind of situations and in web development in general.
I am new to laravel, composer, and windows terminal. I am trying to setup laravel on my local host. I currently have wamp installed and I have used it before to create basic websites. However, I am now doing a bigger project that needs a framework so I decided to learn Laravel. I installed composer as indicated in the directions, but when i run the command
"C:\wamp\www>composer create-project laravel/laravel laravel"
i generate an error message that says
"[InvalidArgumentException] Project directory laravel/ is not empty."
When I open a browser and navigate to "localhost/laravel/public" I encounter the error message from the title of this thread:
"Warning:require(C:\wamp\www\laravel\bootstrap/../vendor/autoload.php): failed to open stream: No such
I have also added the appropriate environment variables from the composer instructions.
I am really lost at this point, and I have spent the past 4 hours trying to debug this.
I am running Windows 8 x64.
Edit:
I tried running composer install in C:\wamp\www and received an error message
Composer could not find the config file:
C:\ProgramData]ComposerSetup\bin Ti initialize a project, please
create a composer.json file as described in the
http://getcomposer.org/ "Getting Started" section "
The dependencies for your project are not installed. Just download composer from GetComposer.org and install it on your Windows Machine. Then navigate to your project root, you will see a composer.json file there. That file specifies all the dependencies of the project. Run composer update in that directory. Composer will then update or install all required dependencies and your application won't show the error then.
cd \wamp\www\yourproject
composer update
"C:\wamp\www>composer create-project laravel/laravel laravel"
"[InvalidArgumentException] Project directory laravel/ is not empty."
This means C:\wamp\www\laravel already existed when you attempted to run the command. Remove the folder, or change the create-project command to use a different folder name for your new project.
"Warning:require(C:\wamp\www\laravel\bootstrap/../vendor/autoload.php): failed to open stream: No such
You need to do a composer install from C:\wamp\www\laravel.
I figured it out! I was missing a folder called "vendor" and a file inside bootstrap called "compiled.php" Sorry for the inconvenience, and thank you for trying!
use the following command to get vendor folder in your project
composer install --no-scripts
i had the same problem but i just ran this command
composer install
to install all the dependencies