I was trying to install laravel after i installed composer and made sure it's working by typing composer on my cmd but right after i added this line on cmd i became unable to see composer command working
composer global require "laravel/installer"
Now when i type composer it does nothing just like that
And here list of the current windows variables
The problem was that there was 2 files composer.phar and composer.bat inside my user folder "C:\Users\Yasser" which opens on cmd by default when i removed these 2 files i was able to use the command composer normally thanks to Peh
Related
I have a question related to composer and laravel. My question is whenever I install the fresh laravel app using command :
composer create-project laravel/laravel blog
Inside my C://xampp/htdocs/ directory and then change path to C://xampp/htdocs/blog/, here I am unable to run the composer command but I had already installed composer from its official website globally in C://xampp/htdocs/ directory. So is there any way to use composer command globally whenever I install fresh laravel app, so that I don't want to install composer in the laravel app directory everytime.
Now I guess they provide direct setting up global installation,
Check here
I did it like this a lot earlier,
Change to the path (or you can add that directory to your path later), and run the installer as mentioned on composer download site to download composer.phar.
Create a new composer.bat file alongside composer.phar.
Using cmd.exe:
run
echo #php "%~dp0composer.phar" %*>composer.bat
Then set it to path environment variable(see this)
Test with a new terminal:
composer -V
Will return
Composer version 1.10.6 2020-05-06 10:28:10
go to composer website and download the exe file, you should have it gloablly if you install it that way.
Good luck ^_^
I'm trying to install and run Laravel on my Mac machine, but my command line doesn't recognize laravel and responds to all laravel commands with "bash: laravel: command not found". I know that the composer bin folder needs to be added to the $PATH, so I went to my home folder and, since none of the profile files I was told to look for were present, I created a .bash_profile file and added the line "export PATH = $HOME/.composer/vendor/bin:$PATH" to it. However, after saving this and restarting my terminal, laravel is still not recognized. Does anyone see what I'm doing wrong here?
I assume you are trying to do laravel new blog. To work you should call composer global require laravel/installer.
In case this doesn't work for you use composer create-project --prefer-dist laravel/laravel blog
I installed Composer via Composer windows installer and it installed to the path C:\ProgramData\ComposerSetup. The composer.phar file is in the bin folder in the directory (C:\ProgramData\ComposerSetup\bin). I have added the Composer PATH to the environment variable. But even after that, I can't make Composer get start by typing composer in the command prompt. Can you help me? I have tried installing it manually in different directories and so far no success.
I have downloaded Console2 and inside it, Composer works just fine. But the windows command prompt doesn't do anything unless I'm in the installation directory.
I'm trying to install Laravel with composer on Windows 7 and am running into an error. This is the command I'm running:
composer global require "laravel/installer=~1.1"
This is the error I get:
file_put_contents(C:\Users\myUser\AppData\Roaming\Composer/vendor/composer/installed.json): failed to open stream: No such file or directory
It's correct to say that the installed.json file does not exist, there's not even a composer folder inside the vendor folder. Not sure why that would be missing. I installed composer using the Windows installer.
Seems to be a composer related issue rather than laravel. I just tried installing yii and am getting a similar error running this:
composer create-project --prefer-dist yiisoft/yii2-app-basic MyApp
For this one, I get this after it successfully creates the folder and seems to load most files:
file_put_contents(C:\wwwroot\MyApp/vendor/composer/installed.json): failed to open stream: No such file or directory
Seems like the problem is that I never have a composer folder in my vendor folder.
UPDATE
I was able to get laravel to install globally by adding the COMPOSER_HOME environment variable. But I still run into a similar error when setting up a Laravel project after that
UPDATE 2
Some additional info, when I use the Windows Installer, composer gets installed in c:\ProgramData\ComposerSetup\bin. If I set the COMPOSER_HOME environment variable to this, laravel can get installed globally. But trying to install a project using the "laravel new MyApp" throws the following error:
Parse error: syntax error, unexpected 'class' (T_CLASS), expecting identifier (T_STRING) or variable (T_VARIABLE) or '{' or '$' in C:\wwwroot\MyApp\artisan on line 31
I suspect that's because I have PHP 5.4 and the latest version of laravel is 5.6 and above, but I want to install 5.0, which is 5.4 and above. I tried doing it using "composer create-project laravel/laravel MyApp 5.0 --prefer-dist" instead. I get the following error:
file_put_contents(c:\wwwroot\MyApp/vendor/composer/installed.json): failed to open stream: No such file or directory
Seems there's just something weird going on with paths that I can't quite figure out.
UPDATE 3
I've now uninstalled composer and re-installed it manually per the instructions provided on the composer site. I'm now trying to create a project using the following command from c:\wwwroot:
composer create-project laravel/laravel c:\wwwroot\MyApp --prefer-dist
It does manage to install some stuff, but seems I get this error before any package it tries to install:
Installing laravel/laravel (v5.1.4)
Loading from cache
Failed to download laravel/laravel from dist: RecursiveDirectoryIterator::__construct(C:\wwwroot/vendor/composer/,C:\wwwroot/vendor/composer/): The system cannot find the path specified. (code: 3)
Again, seems like it can't create a directory for vendor/composer for some reason. I tried running the same command, but from inside an empty c:\wwroot\MyApp folder, same result except the path in the error changes accordingly.
I found the following: https://getcomposer.org/doc/articles/troubleshooting.md#-the-system-cannot-find-the-path-specified-windows-
But I checked my registry and I have none of these entries. So still no clue.
It seems that your composer is not globally accessible. Try to add C:\Users{UserName}\AppData\Roaming\Composer\vendor\bin to your environment variable then restart your Shell or Command-Prompt so that updated Path variables is loaded. Now try to install laravel again.
Here is the detailed instruction:
Go to Control Panel > Systems ans Security > System > Advanced system settings then navigate to envirinment variables then scroll down and locate the PATH then add a semi colon (;) at the end of the PATH string. This means you are declaring a new variable. Then paste the C:\Users{UserName}\AppData\Roaming\Composer\vendor\bin after (;) you have added, restart the command prompt and try to install laravel again.
Uninstall composer and install it again, but this time do enable shell menu. Right click on the location (directory) where you want to create the project, select "use composer here", then "composer create-project laravel/laravel projectName --prefer-dist" should create your laravel project, default to latest version (5.1).
To specify your prefer version:
"composer create-project laravel/laravel 4.2 projectName --prefer-dist"
I will suggest you to install Homestead (http://blog.teamtreehouse.com/laravel-homestead-on-windows) and do all the heavylifting there.
You just need to do homestead ssh to actually connect to your machine and then perform all your operations.
Windows is pretty unpredictable in that kind of situations and in web development in general.
First,I use wamp on my Window7.I open php-openssl,and I git pull the laravel from github.com,and then I put laravel on my d:/wamp/www/, I change the c:/windows/system32.But when I open the url
http://localhost/laravel/public
I see this question.
I am a newbie on laravel,and without install on Ubuntu.Where is my wrong, without no pear,or something else? Thank you!
You need to run composer install in a command prompt.
If you do not have composer, download the phar file from their website.
Place the file you just downloaded into the laravel directory.
Then, make sure that the absolute path to php.exe is added to your PATH environment variable.
Then, you can hold down shift, and right click anywhere inside the laravel directory, and open up a command prompt window. Then, run php composer.phar install. The process may take some time, depending on the speed of your internet connection.
Instead of using the above method, you can download the Composer installer for Windows, install it, and just run composer install.
Note that you only need to do this in order to put the Laravel components together. You do not need to run it on a live server.
Please consult the Laravel Docs for installation and other instructions: http://laravel.com/docs
Try This :
Installing Laravel 4 on WAMP
1. Enable OpenSSL
OpenSSL must be enabled in the PHP configuration.
Edit php.ini in your WAMP’s PHP folder, e.g.:
C:\wamp\bin\php\php5.4.12\
Note: This is not the php.ini in C:\wamp\bin\apache\Apache2.4.4\bin.
Find the following line and remove the semicolon save it:
;extension=php_openssl.dll changed to extension=php_openssl.dll
2. Install Composer
(i).Download the Composer Windows installer from getcomposer.org.
(ii). Run the installer.
(iii). When it asks for the location of php.exe, point it to the executable in your WAMP’s PHP folder, e.g.:
C:\wamp\bin\php\php5.4.12\
(iv). Finish the installation.
(v). Open a command-line interface (cmd) and type:
composer
It should return a list of options. If you get an error, restart your computer and try again.
Composer has now been installed and added to your PATH environment variable. This means you can run it from any directory using the command-line interface.
Now we need to install Composer. This is a dependency manager that will download the latest release of Laravel and specific versions of Laravel’s dependencies, such as Doctrine and Symfony.
3.Install Laravel
Now that Composer has been installed, Composer can download and install Laravel onto your system.
(i). Open a command-line interface (cmd).
(ii). Go to the directory in which you want to install Laravel. This is usually your development directory. In this tutorial, we’ll use C:\wamp\www\laravel
(iii). Instruct Composer to install Laravel into a project directory. we use project name myproject.
composer create-project laravel/laravel myproject --prefer-dist
Note: This will install Laravel in a subdirectory myproject of the current working directory.
Three type of installation to be completed
Now your project was running directory like
C:\wamp\www\laravel\myproject\public\
After completed put tick mark and increase the point....
Do php composer.phar dump-autoload or php artisan dump-autoload