I got the Visual Studio Professional 2015 Update 3 and launched the executable (vs2015.3.exe) while Visual Studio was still running. I got the following "Setup warning" but thought that a computer restart was fine as long as I could work during the update.
Please close visual studio now to reduce the chance that a computer
restart will be required later
Visual Studio immediately started acting strange, loosing Intellisense among others. I decided to restart Visual Studio and was then met with the error:
Cannot run when setup is in progress
I then canceled the update and thought that I could install this update during the night instead. When I opened Visual Studio again and tried to load a project I got the following error:
Project '' could not be opened because the Visual C# 2015 compiler
could not be created. Please re-install Visual Studio.
I then opened Update 3 executable again to complete the update. I was met with this feature list and could not do anything:
Restarted the computer but was met with the same dialog. I then opened Visual Studio again and this time the project loaded but without Intellisense. Restarted Visual Studio and now the project would not load at all. I then deleted the content of these 2 folders and ran devenv /resetsettings
C:\Users\%USERNAME%\AppData\Roaming\Microsoft\VisualStudio\
C:\Users\%USERNAME%\AppData\Local\Microsoft\VisualStudio\14.0\ComponentModelCache
I could now open the Visual Studio project normally again but I still could not get features when running the Update 3 executable. Is there anything else I can do or do I need to reinstall Visual Studio completely? I think it is really bad that the warning Microsoft gives is that a computer restart might be required when obviously the program cannot run in the background while updating.
Solved it by going to Control panel -> Programs and Features -> Microsoft Visual Studio Professional 2015 with Updates. Click "Change" and then select "Repair".
I have visual studio 2013 ultimate installed and recently uninstalled visual studio 2015 community, to upgrade to enterprise 2015.
I had trouble uninstalling 2015, but eventually running the setup and choosing for repair/uninstall did the job. This didn't work for 2013 so I haven't been able to uninstall 2013 yet.
Anyhow, when I try to install enterprise I just get the splash screen for a few seconds, and then it disappears and nothing happens. Which was also the case when I tried to uninstall either visual studio versions earlier.
Why is visual studio such a pain to install/uninstall and how do I solve it?
Thanks!
I got this error I could see the splash screen then it dissapeared and the executable just continued running in the background but no GUI was shown.
A full uinstall and reinstall did not solve the issue.
I solved it by completely removing all the registry settings for Visual Studio 2015 that can be found under:
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio
Remove all subdirectories with 14 in them:
Now when restarting you get to log into your MSDN account and the GUI starts working after that.
I am trying to run a website which has a mix of classic ASP and ASP.Net files along with lots of VB dlls used from the asp scripts. The site is setup and running correctly using IIS7 in Windows 7 professional machine. In order to setup debugging using Visual Studio 2013, I was following the instructions in the following SO post and installed IISExpress 8.0 to setup debugging. But whenever I am trying to attach the iisexpress.exe process hosting my site from the VS Attach to Process window selecting Script code, it is throwing an error and suggesting the VS installation as corrupted. Screenshot shown below:
Seems like a 32/64 bit issue but could not figure out exactly where is the incompatibility and how to fix it. Any help would be greatly appreciated.
There's a Microsoft Connect issue regarding the "corrupt installation (code 0x80040154)" error. It's for VS 2012 but maybe you're running into the same issue even though you have VS 2013, in which case simply repairing VS does not fix the problem.
The OP of the Connect issue said that he fixed the problem by completely uninstalling VS and removing all remnants of it, then reinstalling VS. The steps are:
Uninstall Visual Studio.
Remove these keys from the registry:
Visual Studio 2012:
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\11.0
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\11.0_Config
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\11.0
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\11.0_Config
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0_Config
Visual Studio 2013:
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\12.0
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\12.0_Config
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\12.0
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\12.0_Config
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0_Config
Remove these directories:
Visual Studio 2012:
C:\ProgramData\Microsoft\VisualStudio\11.0
C:\Program Files (x86)\Microsoft Visual Studio 11.0
C:\Users\UserName\Documents\Visual Studio 2012
C:\Users\UserName\AppData\Local\Microsoft\VisualStudio\11.0
C:\Users\UserName\AppData\Roaming\Microsoft\VisualStudio\11.0
Visual Studio 2013:
C:\ProgramData\Microsoft\VisualStudio\12.0
C:\Program Files (x86)\Microsoft Visual Studio 12.0
C:\Users\UserName\Documents\Visual Studio 2013
C:\Users\UserName\AppData\Local\Microsoft\VisualStudio\12.0
C:\Users\UserName\AppData\Roaming\Microsoft\VisualStudio\12.0
Restart the computer.
Reinstall Visual Studio.
(I read elsewhere on the internet that it could be related to 32/64 bit incompatibilities, and perhaps that is the true cause in your case, but I'm inclined to think that VS got corrupted when you installed IIS Express.)
This morning I faced a problem while opening my Visual Studio solution, and when I tried to run it, it said:
No exports were found that match the constraint contract name
How can I fix this problem?
I solved this problem by clearing Visual Studio Component Model Cache.
Just delete or rename this folder:
%LocalAppData%\Microsoft\VisualStudio\11.0\ComponentModelCache
or
%LocalAppData%\Microsoft\VPDExpress\11.0\ComponentModelCache
and restart Visual Studio.
The version of Visual Studio you have is specified by the number e.g.
Visual Studio 2012 is 11.0 (as shown above)
Visual Studio 2013 is 12.0
Visual Studio 2015 is 14.0
Visual Studio 2017 is 15.0
Visual Studio 2019 is 16.0
For those that don't know:
%LocalAppData%\ is the same as C:\Users\{yourUsername}\AppData\Local
For those who have multiple versions of Visual Studio installed, e.g. 2012 and 2013, it might help to remove the ComponentModelCache for both versions before restarting Visual Studio, e.g. 11.0 and 12.0.
No need to rename or delete the whole folder:
(%AppData%\..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache)
Just rename or delete the Microsoft.VisualStudio.Default.cache file inside the above location.
Visual Studio Express 2012 has different paths.
Visual Studio Express
...\Users\{user}\AppData\Local\Microsoft\WDExpress\11.0\ComponentModelCache
With Visual Studio Express 2012 for Web
...\Users\{user}\AppData\Local\Microsoft\VWDExpress\11.0\ComponentModelCache
I did not have to re-install Visual Studio Express
This will really work like a champ:
Solution: Try to delete ComponentModelCache folder from the below location.
[C:]\Users\[your user name]\AppData\Local\Microsoft\VisualStudio\[Visual Studio version number]
And after successful delete, recreate the folder with the same name, "ComponentModelCache".
This issue can be resolved by deleting or clearing all the folders and files from %AppData%\..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
This actually clears the Visual Studio component model cache.
On Windows 7 machines, the path is different. When you type %appdata% in Run dialog, it opens the folder C:\Users\<username>\AppData\Roaming.
Click the 'up' button to navigate to the parent folder and select the folder 'Local'.
Final path: C:\Users\<username>\AppData\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
Deleting the Component Model Cache did not work for me (well, the relative directory given above did not exist in my machine). Instead, I installed an extension to Visual Studio 2012 Express. Menu Tools → Extensions and Updates... → Online → Choose any and then download. This apparently invalidates the cache causing Visual Studio to rebuild it.
Here's my source.
For Visual Studio 2013 you need to remove that folder from this path:
%AppData%\..\Local\Microsoft\VisualStudio\12.0
for Visual Studio 2012 and later versions, the solution must be deleting the content of the folder ComponentModelCache:
C:\Users\[username]\AppData\Local\Microsoft\WDExpress\11.0\ComponentModelCache
Visual Studio 2013
C:\Users\[username]\AppData\Local\Microsoft\VisualStudio\12.0\ComponentModelCache
I had the same problem upon launching Visual Studio 2013 Ultimate, and the solutions here didn't work for me. I tried deleting the mentioned folders and starting Visual Studio again, but it didn't work.
However I had other problems too, like Microsoft.visual studio package did not load correctly and also Page '312e8a59-2712-48a1-863e-0ef4e67961fc' not found VS 2012. The latter refers to a message in the Team Explorer window saying "Page 'somenumber' cannot be found".
So I run devenv /setup on the Visual Studio command prompt with administrative rights. It did the job, and everything is fine now.
Remove ComponentModelCache folder content.
%AppData%..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
Clearing the folders didn't work for me. So I went to 'Programs and Features' and used the change button to startup the Visual Studio 2013 setup.
In the setup I choose the repair function and that fixed the problem for me.
I had the same problem with Visual Studio Express 2013 of Windows 8.1.
Unfortunatly there was no "ComponentModelCache" folder in
%AppData%..\Local\Microsoft\VisualStudio\12.0\ComponentModelCache.
I found the "ComponentModelCache" folder in
..\Users[username]\AppData\Local\Microsoft\WDExpress\12.0
and solved this problem by removing this folder from there.
If you have VS 2013, you have to go to: %LOCALAPPDATA%\Microsoft\VisualStudio\12.0
then rename the ComponentModelCache folder.
I experienced a similar problem after some updates released from Microsoft (part of them where about .NET framework 4.5).
On the Internet I got the following link to the Microsoft knowledge base article:
Update for Microsoft Visual Studio 2012 (KB2781514)
It worked for me.
This happened to me with Visual Studio 2013 Web, after Windows installed several updates. Unfortunately none of the suggestions in this thread helped.
I had to re-run the installer and select the "Repair" option. After that (and a reboot) it was working once again.
In some cases you may have to repair more than one version of Visual Studio. One example is when a Script Task control in VS 2013 opens VS 2012 when you click Edit Script.
Renaming the ComponentModelCache folder worked for me in Visual Studio 2015, but with a slightly different path:
%AppData%\..\Local\Microsoft\VisualStudio\14.0\ComponentModelCache
I have Windows 7 x64 with a second partition on which Windows 8 (preview installed). While working with Microsoft Visual Studio Express 2012 for Windows Phone, I come up with the same problem. But the ComponentModelCache is found here:
C:\Users\Jayaram\AppData\Local\Microsoft\VPDExpress\11.0
I am unable to delete or rename as I get the "access is denied" message when I try to use command prompt:
Administrator: VS2012 X64 CrossToolsCommandPrompt
This issue is because of a MEF cache corruption.
Installing the feedback extension (or installing any extension) will invalidate the cache causing VS to rebuild it.
click for source.
i experienced this problem in Microsoft Visual Studio Express 2012 for windows phone while trying to open file.
Then i browsed to
C:\Users\MyUserName\AppData\Local\Microsoft\VPDExpress\11.0\ComponentModelCache
And Inside ComponentModelCache i deleted Microsoft.VisualStudio.Default.cache CACHE file. Finaly i restarted visual studio and reopened my project.
Then my problem was solved, i was able to open file.
Note: My OS is windows 8. And i installed SDK 8 for developing windows phone app
Thanks
I am using Visual Studio 2012. After installing the Visual Studio 2013 web express, when I want to run or open any project in Visual Studio 2012 it shows me the following error:
"no exports were found that match the constraint contract name".
I also tried the above solution for clearing the ComponentModelCache,
but I did not find the folder. I solves my problem just by: Repair Visual Studio 2012
For the Express versions of the software, the folder you need is in a slightly different place(s): For Express 2012 for Web it is C:\Users\XXXXXXXX\AppData\Local\Microsoft\VWDExpress - not in the Visual Studio folder.
I got an error with the same error message - two years later.
It's a different problem this time though, related to .NET Core dnx things.
I couldn't find an answer on Stack Overflow, but there's a GitHub issue that contains a workaround: https://github.com/aspnet/Home/issues/1455
Below is the most important part of the workaround:
Delete the entire C:\Program Files (x86)\Microsoft Visual Studio
14.0\Common7\IDE\Extensions\Microsoft\Web Tools\DNX directory. (As far as I understand, it belongs to the old version of ASP.NET Core
RC1, which for some reason is still shipped even with Visual Studio 2015 Update-3).
Delete the C:\Users\<user>\AppData\Local\Microsoft\VisualStudio\14.0\devenv.exe.config file.
Run the Developer Command Prompt for Visual Studio 2015 as Administrator, and execute the devenv /setup command. The new devenv.exe.config file is generated. This time there are many assemblies that refer to the
C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\Extensions\Microsoft\DotNet directory.
Run the Visual Studio 2015 and check that it shows the Microsoft .NET Core Tools (Preview 2) 14.1.20624.0 in the Help => About Microsoft Visual Studio menu.
Thanks to olegburov's post on GitHub for figuring this out.
I had to uninstall some external components like Postsharp and Apex and then it worked. I also tried the chosen solution but it gave me more errors.
Deleting the folders haven't worked for me i have go control panel and repaired
Visual Studio Installer Projects extensions for VS 2013.
And it worked for me
I got this error after reinstalling IntelliJ IDEA and ReSharper for C# in Visual Studio 2013.
First, I got an error problem with extensions, and after this I got this error:
"No exports were found that match the constraint contract name”
I simply removed folder ComponentModelCache and resolved this error.
My 2 cents:
Following all above lifesaving tips, I had a slightly different experience; mine is VS 2017 Community Edition, installed once, and I notice that have all these 3 folders:
%LocalAppData%\Microsoft\VisualStudio\15.0 ==> Empty
%LocalAppData%\Microsoft\VisualStudio\7f0c75b0 ==> has only the CoreCon folder
This is the one that has the ComponentModelCache:
%LocalAppData%\Microsoft\VisualStudio\15.0_7f0c75b0
Deleting only the Microsoft.VisualStudio.Default.cache had no effect.
So, I deleted all 4 files there: .cache, .err, .external and catalogs.
On restarting VS, problem gone and appeared a 5th file:
Microsoft.VisualStudio.Default.scan
Removing ComponentModelCache did not work for me. Reinstalling VS 2019 did thanks to a recommendation on this Microsoft support thread.
Details
This seems to be a known bug with a fix incoming from MS (as of 1/7/2020)
Experienced after upgrading from VS2019 Pro 16.2 (i think it was?) to 16.4.2 using Visual Studio Installer
Error displayed when trying to launch both nuget console and nuget package manager