When using the goto function to bring my cursor to a particular line number, say 3017, how do I prevent Sublime from jumping around from line to line until I hit enter?
For instance, in that case, I would jump to the following lines:
3
30
301
3017 (finally)
Sublime Text 3 seems to have two "Goto Line" features:
one which is built in via the "Goto Anything" overlay. Internally, the command to execute this is show_overlay with the arguments {"overlay": "goto", "text": ":"}. This is the default, available from the Goto menu -> Goto Line, and with keybinding Ctrl+G. MattDMo is correct in his answer that it is not possible to disable fuzzy matching in this overlay.
one which is included in the "Default" package as a plugin and shows a small prompt panel at the bottom of the screen. Internally, the command to execute this is prompt_goto_line, with no arguments necessary. This implementation has the behavior you desire, and will only go to the specified line when you hit the enter key. It has no default way of accessing it, but read on... :)
The reason I have mentioned the internal commands above is because Sublime Text makes it possible to add or override keybindings, and also to change or add menu items, and the commands are used to instruct Sublime Text what action to perform.
Therefore, this means that you can choose to override the existing menu item and/or keybinding, (and/or you can create a new menu item and/or keybinding) to use the prompt_goto_line command. The two links I have just provided should give enough detail on how to perform these tasks, but if you would like more specific information, please let me know in a comment and I will provide it.
This feature is by design, and cannot be disabled. Most popup menus in Sublime feature "fuzzy matching", meaning you do not need to type the full search term, just a few letters (for example, pci finds Package Control: Install Package in the Command Palette). The menus also feature instant searching, which is what you are seeing. This means that you do not need to hit Enter to search, just start typing and the matches appear as you type.
Related
I have been developing in zend studio and there is a feature I miss a lot in Xcode. When you are reading code in a main function and you want to go in a specific function to read something, you can click in the left area of your current line of code were your are, and a flag-mark appears in that line of code, so you can go anywere else in the code and it will be very easy to come back to that line of code you were before because there is a flag and you only have to click on it and you automatically go back. Does Anybody know a similar way to do this in Xcode?
Unfortunately, this feature was present in earlier versions of Xcode (up to Xcode3 IIRC) and was called "Bookmarks", but it was removed since then.
You can use breakpoints (and disable them) as a workaround, even if it's not perfect. I personally prefer using other tricks, like "Open Quickly" and named tabs.
Alternate trick 1 : "Open Quickly"
One trick is to use Command+Shift+O (or "File" menu > "Open Quickly") to quickly open a file. In the field that appears, you can type:
The name or parts of the name of a file.
Typing "MainViewController" will propose to jump to the MainViewController.h or MainViewController.m file.
Typing "MainVC" will work too, as well as "MainViewCtrl", as long as the order of the letters you type is the same as the full name.
Very handy to just type "ContTVCell" to open the ContactsTableViewCell.h file that is hidden deep in subgroups of my project for example
Similarly, you may also type the name or parts of the name of a symbol, especially a method name.
For example, typing tvcellforrow will list you all the definitions of -tableView:cellForRowAtIndexPath: it could find in your project and let to jump to the one you want
When typing (parts of) the name of a file, adding : followed by a number at the end will allow you to directly jump at the corresponding line
For example, typing mvc:50 will propose you to jump to line 50 of MainViewController.h or MainViewController.m
Another trick : using (named) tabs
Don't forget that you can open tabs in Xcode, which can be very handy in this kind of situation.
When you are editing a file at some interesting position, you can create a new tab to browse elsewhere and go at any other place… and then go back to your first tab to find the code where you left it at the time you switched to the other tab.
Don't forget that you can name your tabs (simply double-click on their title) to give them a more explicit title. You may then quite think of them as "named bookmarks" somehow
Likewise, don't forget that you can detach tabs in separate windows too, if you prefer (for example to keep them around and visible on your secondary screen while you edit another part of your code)
You can even combine this with the "Open Quickly" trick presented above: once you made the "Open Quickly" field appear and typed something into it, instead of just validating using the enter key:
use Alt+Shift+enter to let Xcode present you a small widget that let you choose where you want the file to open (in the current tab, in another tab, in the assistant editor, in a dedicated window…)
use Alt+enter to open the file using the alternate navigation defined in Xcode preferences (Xcode > Preferences > Navigation > Optional Navigation). By default, the behavior when opening a file while using the Alt key is to open the file in the Assistant Editor. Personally I changed that in my Xcode preferences as I prefer to make Xcode open the file in a separate tab instead, which makes Alt+clic much more useful.
Sure, all those tricks with "Open Quickly…" and "Tabs" do not replace the bookmarks feature that you are missing. But they are still nice alternate ways to jump quickly to any position in your code, even any specific line of any specific file in your project, wherever you are in Xcode (even without having to have the Project Navigator visible on the left part of your window), and let you have multiple editors in different tabs to go quickly back to a part of interest in your code
its on top of your editor i have added two pics just check them.
When you navigate to another place in Xcode, say, open a different file, or Command-click and jump to definition, you can go forward and back by swiping right or left on the trackpad with two fingers.
You can also use keyboard shortcuts: Ctrl+⌘+→ to go forward, or Ctrl+⌘+← to go back.
Finally, you can click triangular buttons at the top left in your edit area.
There is a go back button at the top left of the editor!
If that is not good enough, whar I do is misuse breakpoints to set flags in my code. The breakpoint navigator thus becomes a table of flags. It isn't much but there you are.
In Eclipse, there are two distinct features: one to format a selection, one to just indent the lines, see e.g. Difference between Ctrl+Shift+F and Ctrl+I in Eclipse. I found the format feature in Visual Studio but how can I actually just indent the lines? Is there some built-in command for that or possibly a 3rd party add-on?
Note: I have asked a couple of friend that use VS daily and they all tried to persuade me that I am looking for the format feature. No I'm not. I tried to live with it for a while and it is just a different feature. I am after the indent/reindent only.
EDIT: I am looking for a clever indent, sometimes called reindent, which is different to just pressing Tab or Shift+Tab (increase/decrease indent level). The indent feature in Eclipse behaves like this:
It places a beginning of current line at the right position, no matter where that line was starting before. So instead of thinking whether you need to increase or descrease the indent level (Tab or Shift+Tab), you just invoke the indent command and it will do the right thing.
Invoking the indent command on an empty line places the caret at the right position for the user to start typing.
It never influences any character beyond the first non-whitespace character.
If you just want to indent some lines, you can
Select them.
Press Tab.
To un-indent them, replace the second step to: Shift+Tab.
You can find more VS shortcuts here.
There are toolbar buttons for this, with wonderfully inconsistent labels (at least in the Visual Studio 2013 I'm using)...
In the "Text Editor" toolbar (in my default setup), I have to buttons whose tooltips are:
"Decrease Line Indent"
"Increase Line Indent"
In the "Customize" dialog, on the "Commands" tab (with "Toolbar" set to "Text Editor") they appear in the list as:
"Line Unindent"
"Line Indent"
And finally, if you press the "Add Command..." button (on the "Customize" dialog) to produce the "Add Command" dialog and select the "Edit" category, you'll see these two entries:
"Outdent"
"Indent"
As far as I can tell, these are all the same two commands, which should do what you want.
They also appear in the Edit -> Advanced menu, at the very bottom.
----- Edit -----
I believe you might be able to turn off all of the "formatting" actions except for indentation, so that when you use the "auto-format" command, only the indentation is "formatted" for you. (Of course this prevents you from ever using the rest of the formatting features without turning them on again, but if you don't use them, this might work!)
I'd like to use the keyboard more in Visual Studio, and my memory for ctrl+alt+f??, alt+?? key combinations is failing me.
I'd prefer an adjunct like the emacs model, where it's possible to search commands by name; For instance, in emacs you type
alt+x enab <tab><tab>
and it presents you with a list of commands starting 'enab';
enable-command
enable-flow-control
enable-theme
I'd like to know if there is a shortcut or extension so that I could do something similar in VS, like
alt+x imm <tab><tab>
and then choose to execute one of
Debug.Immediate
Tools.ImmediateMode
Any clues?
EDIT
Both #Trillian and #the_mandrill have given me the right answers. It turns out there are two ways to enter the kind of mode I'm looking for;
1) The Edit.GoToFindCombo, which gives you a small bit of menu-bar space to type things like
>Debug.Immediate
2) The View.CommandWindow, which gives you a full panel (like the immediate window or the output window) which allows you to type in a bit more space and see the text output of executed commands.
It's also possible to alias commands in either window yourself, using the command window and a syntax like
alias sol View.SolutionExplorer
And to retrieve the current list like
alias
I've mapped Edit.GoToFindCombo to alt-x and View.CommandWindow to alt-shift-x and it's feelimg more emacs-y already :)
It would be nice if this was integrated in the Ctrl+Q Quick Launch box. Until then, the best built-in tool for this is probably the Go To Find Combo. You can use this to launch arbitrary commands by typing the '>' character and then the beginning of a Visual Studio command, including those you listed. You get autocompletion, but only for strings that start with what you're typing, so >Deb would list you all commands starting with Debug.. For your specific example, >imm would actually work because there is an immed shortcut to Debug.Immediate, but in general you'll have to know the prefix.
The Go To Find Combo is not in the VS2013 UI by default, but you can add it to any toolbar by selecting "Customize" and finding the command in the "Edit" category. Once it's sitting in a toolbar, the Ctrl+/ shortcut will give it the focus by default.
The '>' prefix for command completion also works from the Command and Immediate windows.
Try using the Command Window (Ctrl-Alt-A). This brings up an emacs-like command buffer. Type:
Deb.Imm<tab>
to expand to Debug.Immediate. Typing the '.' forces autocompletion if there's one unique command (Debug is the only match for 'De'). Tab key will cycle through options. More info at the Command Window article on MSDN. There's also a list of Aliases that you can also add your own to, eg
alias di Debug.Immediate
I've also just discovered that you can type Ctrl-\ to set the focus to the Find pane and enter a command directly in there.
For example, let's say I have three tabs open in vim:
1: nice_program.c
2: something_fun.h
3: super_script.sh
So if I hit some magic modifier key, and then type 'n' and hit enter I change tab to tab 1. Likewise, typing 'su' instead will navigate me to tab 3 instead.
Is such behavior possible? There are so many vim extensions, and I dont really get the whole vim extension lingo.
BTW, I am using gVim on XP and MacVim on OS X. Preferably the solution will work on both...
EDIT:
Note that I only want the incremental search to search across the names of the open tabs. That is, it's not supposed to actually search inside the tabs themselves.
Also, I never use buffers, it's tabs that I want this working for.
From the wording of the question it seems that you take the idea of tabs in
Vim not the way it is supposed to be taken by design of this feature. A Vim
tab page is not a form of a buffer or a window, it is a window layout
container, instead. No wonder there is no built-in way for switching to a tab
by the name of a buffer that is active (or the only one in its tab page, or
special in some other way). Semantically, that is switching to a buffer, not
a tab (but tab could be switched in order to show a buffer, if it is
necessary).
To switch to a buffer by its name use the :sbuffer command (:sb, for
short). It is not necessary to type the whole buffer name each time, since
the command has auto-completion. Usually one have to type only few letters of
a name to uniquely identify a buffer (the same way as you described
incremental search in the question).
By default, Vim open the requested buffer displacing one in the current
window. This behavior is governed by the switchbuf option. One of the
choices (called usetab) provided by that option allows to switch to a window
in another tab page if that window contains the buffer to edit. This is
exactly what suits your manner of work with tab pages.
To summarize, change the switching behavior as follows
:set switchbuf=usetab
and use the :sb command to open a buffer by typing a few letters of its name
and using Tab-completion.
I use this snippet I picked up in vim wiki to switch between open buffers (mapped to F5):
" switch between numbered buffers
:nnoremap <F5> :buffers<CR>:buffer<Space>
(put in your .vimrc file or whichever dotfile you use).
As for incremental search across open buffers, whenever I look up something using either /[something] or with */# on current word, it's automagically also highlighted in other buffers/tabs. Then I can switch buffers and hit n or N to move between matches in the currently viewed buffer. That's already baked into Vim.
Hope that helps.
The :set switchbuf=usetab solution given by ib never worked for me for whatever reason (even without loading plugins or my .vimrc) but :tab drop name-of-file works just the way you want (I found it on the Vim wiki).
Make it a custom mapping to save a few keystrokes with nnoremap <leader>t :tab drop.
Also I second ib's comment on the right and wrong way to use tabs in Vim.
This is a GUI application (actually MFC). I need a command window with the ability to display a prompt like such:
Name of favorite porn star:
The user should be able to enter text after the prompt like such:
Name of favorite porn star: Raven Riley
But I need to prevent the user from moving the cursor into the prompt area. Users should also be prevented from backspacing into the prompt in order to prevent the following:
Rrraven Rrrileeey Ruuuulez!!! Name of favorite porn star:
Also need to control text selection and so on. And finally, I should have no problem retrieving only the text the user entered (minus prompt text).
Will it be better to create my own window class from scratch (i.e inherit from CWnd) or should I reuse the Windows EDIT control (i.e. inherit from CEdit)?
A similar command window can be seen in AutoCAD and Visual Studio (in debug mode).
I think you'd be better off creating a subclass of CEdit and limiting filtering key-presses. I suppose the hard part is not letting the user move the caret to the prompt area, but you can probably write some code to make sure the caret always get sent back to where it belongs (the input part).
Anyway, if you really, really want to implement your own control (it's not that difficult after all) I recommend you read Jacob Navia's "technical documentation" on how he built the LCC compiler and environment. Actually, it seems the docs are not online anymore, but I'm sure you can get them through his e-mail (jacob#jacob.remcomp.fr).
Edit: I liked your previous example better. Keep it classy, LOL :)
I had a very similar requirement and did exactly what davidg suggested; subclassed a edit control and filtered key presses. This was actually using Qt not MFC but the principle will be exactly the same.
You need to remember to filter keys such as home as well as left and backspace. I just checked to see if the move would move the caret into the prompt and if it did ignored the keypress.
Another thing to watch for is pasting multiline text, you will have to choose whether to just paste the first line or all lines, adding the prompt on all lines after the first. When subclassing the control you get lots of behaviour which won't work exactly as you want it.