Trouble w/ Meteor Sorting - sorting

I'm trying to add a simple drop down control above a list such that I can sort it by "created" or "title".
The list template is called posts_list.html. In it's helper .js file I have:
posts: function () {
var sortCriteria = Session.get("sortCriteria") || {};
return Posts.find({},{sort: {sortCriteria: 1}});
}
Then, I have abstracted the list into another template. From here I have the following click event tracker in the helper.js
"click": function () {
// console.log(document.activeElement.id);
Session.set("sortCriteria", document.activeElement.id);
// Router.go('history');
Router.render('profile');
}
Here I can confirm that the right Sort criteria is written to the session. However, I can't make the page refresh. The collection on the visible page never re-sorts.
Frustrating. Any thoughts?
Thanks!

You can't use variables as keys in an object literal. Give this a try:
posts: function() {
var sortCriteria = Session.get('sortCriteria');
var options = {};
if (sortCriteria) {
options.sort = {};
options.sort[sortCriteria] = 1;
}
return Posts.find({}, options);
}
Also see the "Variables as keys" section of common mistakes.

thanks so much for that. Note I've left commented out code below to show what I pulled out. If I required a truly dynamic option, versus the simply binary below, I would have stuck w/ the "var options" approach. What I ended up going with was:
Template.postList.helpers({
posts: function () {
//var options = {};
if (Session.get("post-list-sort")) {
/*options.sort = {};
if (Session.get("post-list-sort") == "Asc") {
options.sort['created'] = 1;
} else {
options.sort['created'] = -1;
}*/
//return hunts.find({}, options);}
console.log(Session.get("hunt-list-sort"));
if (Session.get("hunt-list-sort") == "Asc") {
return Hunts.find({}, {sort: {title: 1}});
}
else {
return Hunts.find({}, {sort: {title: -1}});
};
}
}
});

Related

Cypress automation: multiple cy.get elements in one function

I have a function:
checkWebElemAndAssert(...elements) {
for (const element of elements) {
element.should('be.visible').click().should('be.checked');
}
}
and i use it within another function:
checkRegisterValues = () => {
let maleCheckBox = cy.get('input[value=Male]');
let femaleCheckBox = cy.get('input[value=FeMale]');
let cricketCheckBox = cy.get('#checkbox1');
let registerElemList = [maleCheckBox, femaleCheckBox, cricketCheckBox];
this.browserUtils.checkWebElemAndAssert(...registerElemList);
return this;
}
The problem is that when i use checkRegisterValues() it uses for each action the last element: cricketCheckBox. Any hints on what is wrong? i would expect that the action is made for each element and not the last one.
Have you tried passing in the array like this?
this.browserUtils.checkWebElemAndAssert(registerElemList);
You can also print out
checkWebElemAndAssert(...elements) {
console.log(elements);
for (const element of elements) {
element.should('be.visible').click().should('be.checked');
}
}
and see what you are passing in
ok so i read a bit more and made this:
checkWebElemAndAssert2(elements) {
cy.get(elements).each(($list) => {
cy.get($list).click({ multiple: true }).should('be.checked')
})
}
Basically in elements when i call checkWebElemAndAssert2 i will give the list identifier. Seems to work but not sure meets the standard.
checkRegisterValues = () => {
let myList = 'input[type=radio]';
this.browserUtils.checkWebElemAndAssert2(myList);
return this;
}

Going back to "previous tab" in TabRouter

In react-navigation, I wanted to use TabRouter but on this.props.navigation.goBack() I wanted it to go to the previous tab.
Does anyone have any idea how to go to previous tab, I was hoping it would as simple as setting backBehavior: 'previousTab'.
I have hacked solution here, but its a bad hack as I had to modify the lib files:
I was only able to accomplish this by setting backBehavior to initialRoute, and then on my TabRouter adding a custom getStateForAction like this:
const defaultGetStateForAction = HubNavigator.router.getStateForAction;
HubNavigator.router.getStateForAction = function(action, state) {
switch (action.type) {
case NavigationActions.INIT: {
if (!this.TAB_HISTORY) this.TAB_HISTORY = [];
this.TAB_HISTORY.length = 0;
this.TAB_HISTORY.push({ index:ROUTE_INDEX[INITIAL_ROUTE_NAME], params:undefined }); // i dont think INIT ever has params - C:\Users\Mercurius\Pictures\Screenshot - 1, 2017 10.47 AM.png
break;
}
case NavigationActions.NAVIGATE: {
const { routeName } = action;
this.TAB_HISTORY.push({ index:ROUTE_INDEX[routeName], params:action.params });
break;
}
case NavigationActions.BACK: {
if (this.TAB_HISTORY.length === 1) {
BackHandler.exitApp();
return null;
} else {
const current = this.TAB_HISTORY.pop();
const previous = this.TAB_HISTORY[this.TAB_HISTORY.length - 1];
const default_ = defaultGetStateForAction(action, state, ()=>{
console.log('returning previous index of:', previous.index);
return previous.index
});
default_.index = previous.index;
default_.routes[previous.index].params = previous.params;
return default_;
}
}
}
return defaultGetStateForAction(action, state);
}
What I do is, on NavigationActions.BACK I modify the returned object index to have the previous index, which I hold in the array this.TAB_HISTORY.
However when I start the app, switch from initial tab to tab 2, then from tab 2 back to initial tab... pressing "back" would do nothing this is because activeTabIndex is always set to initialRouteIndex here - https://github.com/react-community/react-navigation/blob/5e075e1c31d5e6192f2532a815b1737fa27ed65b/src/routers/TabRouter.js#L138
So you see in my fix above I pass a third argument to defaultGetStateForAction which returns the index, but I had to modify react-navigation/src/routers/TabRouter.js for this, which is not what I want to do.
Does anyone have any idea how to go to previous tab, I was hoping it would as simple as setting backBehavior: 'previousTab'.
Here is my HubNavigator in case you want to see that:
const ROUTE_INDEX = { Players: 0, Girls: 1, Customers: 2, Assets: 3 };
const INITIAL_ROUTE_NAME = 'Players';
const HubNavigator = TabNavigator(
{
Players: { screen:ScreenPlayers },
Girls: { screen:ScreenGirls },
Customers: { screen:ScreenCustomers },
Assets: { screen:ScreenAssets }
},
{
initialRouteName: INITIAL_ROUTE_NAME,
backBehavior: 'initialRoute',
cardStyle: styles.card,
order: Object.entries(ROUTE_INDEX).sort(([,indexA], [,indexB]) => indexA - indexB).map(([routeName]) => routeName),
}
)

Creating a new kendo binding for "associative arrays"

I'll start off by stating that I don't know if this is possible at all, but I'm reading over the Kendo UI documentation and trying to figure out how to at least try it, but I'm running into a lot of difficulties with making a custom binding. This is a followup to another question I am still working on, which is posted here. If this is not an appropriate question, please kindly let me know, and I will close it or rephrase it. I'm just really lost and confused at this point.
As I understand it, based on what I've been told and tried, Kendo cannot bind to an Associative Array not because the data isn't good, but because it is an array of objects, each as a separate individual entity - under normal circumstances, an array would be a bit different and contain a length property, as well as some other functions in the array prototype that make iteration through it possible.
So I was trying to conjecture how to get around this. I succeeded in getting what I think was a workaround to function. I preface that with "think" because I'm still too inexperienced with Javascript to truly know the ramifications of doing it this way (performance, stability, etc)
Here is what I did;
kendo template
<script type="text/x-kendo-template" id="display-items-many">
# for(var key in data) { #
# if (data.hasOwnProperty(key) && data[key].hasOwnProperty("Id")) { #
<tr>
<td>
<strong>#= data[key].Id #</strong>
</td>
<td class="text-right">
<code>#= data[key].Total #</code>
</td>
</tr>
# } #
# } #
</script>
html
<table class="table borderless table-hover table-condensed" data-bind="source: Associative data-template="display-items-many">
</table>
Now to me, immediately off hand, this gave me the illusion of functioning. So I got to thinking a bit more on how to fix this ...
I want to create a new binding called repeat. The goal of this binding is as follows;
repeat the template for each instance of an object within the given root object that meets a given criteria
In my head, this would function like this;
<div data-template="repeater-sample" data-bind="repeat: Associative"></div>
<script type="text/x-kendo-template" id="repeater-sample">
<div> ${ data.Id }</div>
</script>
And the criteria would be a property simply called _associationKey. So the following would, in theory, work.
$.ajax({
// get data from server and such.
}).done(function(results){
// simple reference to the 'associative array' for easier to read code
var associative = results.AssociativeArray;
// this is a trait that everything in the 'associative array' should have to match
// this is purely, purely an example. Obviously you would use a more robust property
var match = "Id";
// go through the results and wire up the associative array objects
for(var key in associative ) {
if(associative.hasOwnProperty(key) && associative[key].hasOwnProperty(match)) {
associative[key]._associationKey = 10; // obviously an example value
}
}
// a watered down example implementation, obviously a real use would be more verbose
viewModel = kendo.observable({
// property = results.property
// property = results.property
associativeArray = associative
});
kendo.bind('body', viewModel);
});
So far this actually seems to work pretty well, but I have to hard code the logic in the template using inline scripting. That's kind of what I want to avoid.
Problem
The big issue is that I'm vastly confused on telerik's documentation for custom bindings (available here). I do have their examples to draw from, yes - but it's a bit confusing to me how it interacts with the object. I'll try to explain, but I'm so lost that it may be difficult.
This is what telerik gives for an example custom binding, and I've pruned it a bit for space concerns;
<script>
kendo.data.binders.repeater = kendo.data.Binder.extend({
init: function(element, bindings, options) {
//call the base constructor
kendo.data.Binder.fn.init.call(this, element, bindings, options);
var that = this;
// how do we interact with the data that was bound?
}
});
</script>
So essentially that's where I am lost. I'm having a big disconnect figuring out how to interact with the actual "associative array" that is bound using data-bind="repeat: associativeArray"
So ..
I need to interact with the bound data (the entire 'associative array')
I need to be able to tell it to render the target template for each instance that matches
Further Updates
I have been digging through the kendo source code, and this is what I have so far - by taking the source binding as an example... but I'm still not getting the right results. Unfortunately this poses a few problems;
some of the functions are internal to kendo, I'm not sure how to get access to them without re-writing them. While I have the source and can do that, I'd prefer to make version agnostic code so that it can "plug in" to newer releases
I'm totally lost about what a lot of this does. I basically made a copy of the source binding and replaced it with my own syntax where possible, since the concept is fundamentally the same. I cannot figure out where to do the test for qualification to be rendered, if that makes sense.
I'm having a big logic disconnect here - there should ideally be some place where I can basically say ... If the current item that kendo is attempting to render in a template matches a criteria, render it. If not, pass it over and then another place where I tell it to iterate over every object in the 'associative array' so as to get to the point where I test it.
I feel just forcing a for loop in here will actually make this fire too many times, and I am getting pretty lost. Any help is greatly appreciated.
kendo.data.binders.repeat = kendo.data.Binder.extend({
init: function(element, bindings, options) {
kendo.data.Binder.fn.init.call(this, element, bindings, options);
var source = this.bindings.repeat.get();
if (source instanceof kendo.data.DataSource && options.autoBind !== false) {
source.fetch();
}
},
refresh: function(e) {
var that = this,
source = that.bindings.repeat.get();
if (source instanceof kendo.data.ObservableArray|| source instanceof kendo.data.DataSource) {
e = e || {};
if (e.action == "add") {
that.add(e.index, e.items);
} else if (e.action == "remove") {
that.remove(e.index, e.items);
} else if (e.action != "itemchange") {
that.render();
}
} else {
that.render();
}
},
container: function() {
var element = this.element;
if (element.nodeName.toLowerCase() == "table") {
if (!element.tBodies[0]) {
element.appendChild(document.createElement("tbody"));
}
element = element.tBodies[0];
}
return element;
},
template: function() {
var options = this.options,
template = options.template,
nodeName = this.container().nodeName.toLowerCase();
if (!template) {
if (nodeName == "select") {
if (options.valueField || options.textField) {
template = kendo.format('<option value="#:{0}#">#:{1}#</option>',
options.valueField || options.textField, options.textField || options.valueField);
} else {
template = "<option>#:data#</option>";
}
} else if (nodeName == "tbody") {
template = "<tr><td>#:data#</td></tr>";
} else if (nodeName == "ul" || nodeName == "ol") {
template = "<li>#:data#</li>";
} else {
template = "#:data#";
}
template = kendo.template(template);
}
return template;
},
add: function(index, items) {
var element = this.container(),
parents,
idx,
length,
child,
clone = element.cloneNode(false),
reference = element.children[index];
$(clone).html(kendo.render(this.template(), items));
if (clone.children.length) {
parents = this.bindings.repeat._parents();
for (idx = 0, length = items.length; idx < length; idx++) {
child = clone.children[0];
element.insertBefore(child, reference || null);
bindElement(child, items[idx], this.options.roles, [items[idx]].concat(parents));
}
}
},
remove: function(index, items) {
var idx, element = this.container();
for (idx = 0; idx < items.length; idx++) {
var child = element.children[index];
unbindElementTree(child);
element.removeChild(child);
}
},
render: function() {
var source = this.bindings.repeat.get(),
parents,
idx,
length,
element = this.container(),
template = this.template();
if (source instanceof kendo.data.DataSource) {
source = source.view();
}
if (!(source instanceof kendo.data.ObservableArray) && toString.call(source) !== "[object Array]") {
source = [source];
}
if (this.bindings.template) {
unbindElementChildren(element);
$(element).html(this.bindings.template.render(source));
if (element.children.length) {
parents = this.bindings.repeat._parents();
for (idx = 0, length = source.length; idx < length; idx++) {
bindElement(element.children[idx], source[idx], this.options.roles, [source[idx]].concat(parents));
}
}
}
else {
$(element).html(kendo.render(template, source));
}
}
});
I would propose as a simpler solution transform transmitted associative array in an array. This is pretty simple and (for most cases) can solve your problem.
Lets say that you get the following associative array received from the server:
{
"One" : { Name: "One", Id: "id/one" },
"Two" : { Name: "Two", Id: "id/two" },
"Three" : { Name: "Three", Id: "id/three" }
}
That is store in a variable called input. Transform it from associative to no associative is as easy as:
var output = [];
$.each(input, function(idx, elem) {
elem.index = idx;
output.push(elem);
});
Now, you have in output an equivalent array where I saved the index field into a field called index for each element of the associative array.
Now you can use out-of-the-box code for displaying the data received from the server.
See it in action here : http://jsfiddle.net/OnaBai/AGfWc/
You can even use KendoUI DataSource for retrieving and transforming the data by using DataSource.schema.parse method as:
var dataSource = new kendo.data.DataSource({
transport: {
read: ...
},
schema : {
parse: function (response) {
var output = [];
$.each(response, function(idx, elem) {
elem.index = idx;
output.push(elem);
});
return output;
}
}
});
and your model would be:
var viewModel = new kendo.data.ObservableObject({
Id: "test/id",
Associative: dataSource
});
You can see it in action here: http://jsfiddle.net/OnaBai/AGfWc/1/

How do I add a css class to particular rows in slickGrid?

I've searched everywhere to find out how to add a class to a particular row in slickgrid. It looks like there used to be a rowCssClasses property but it's gone now. Any help on this would be extremely appreciated.
Update: I figured it out using the getItemMetadata...so before you render, you have to do something like this:
dataView.getItemMetadata = function (row) {
if (this.getItem(row).compareThis > 1) {
return {
'cssClasses': 'row-class'
};
}
};
That will inject that 'row-class' into the row that matches the if statement. It seems that this getItemMetadata function doesn't exist until you put it there and slickGrid checks to see if there's anything in there. It makes it kind of difficult to figure out it's options but if you search for getItemMetadata in the slick.grid.js file you should find some hidden treasures! I hope this helps someone!
If there's a better way of doing this, please let me know.
In newer versions of SlickGrid, DataView brings its own getItemMetadata to provide formatting for group headers and totals. It is easy to chain that with your own implementation though. For example,
function row_metadata(old_metadata_provider) {
return function(row) {
var item = this.getItem(row),
ret = old_metadata_provider(row);
if (item && item._dirty) {
ret = ret || {};
ret.cssClasses = (ret.cssClasses || '') + ' dirty';
}
return ret;
};
}
dataView.getItemMetadata = row_metadata(dataView.getItemMetadata);
myDataView.getItemMetadata = function(index)
{
var item = myDataView.getItem(index);
if(item.isParent === true) {
return { cssClasses: 'parentRow' };
}
else {
return { cssClasses: 'childRow' };
}
};
//In my CSS
.parentRow {
background-color: #eeeeee;
}
.childRow {
background-color: #ffffff;
}
You could use the setCellCssStyles function:
https://github.com/mleibman/SlickGrid/wiki/Slick.Grid#wiki-setCellCssStyles
grid.setCellCssStyles(key, hash)
key - A string key. Will overwrite any data already associated with
this key.
hash - A hash of additional cell CSS classes keyed by row number and
then by column id. Multiple CSS classes can be specified and separated
by space.
Example:
{
0: {
"number_column": "cell-bold",
"title_column": "cell-title cell-highlighted"
},
4: {
"percent_column": "cell-highlighted"
} }
I used that to highlight edited fields in my grid. I didn't like the getItemMetadata method.

Magento Enterprise Tabs - How to select specific tab in link?

I am trying to link to a specific tab in Magento Enterprise. It seems that all of the answers I've found don't apply well to their method. I just need a link to the page to also pull up a specific tab. This is the code they use:
Enterprise.Tabs = Class.create();
Object.extend(Enterprise.Tabs.prototype, {
initialize: function (container) {
this.container = $(container);
this.container.addClassName('tab-list');
this.tabs = this.container.select('dt.tab');
this.activeTab = this.tabs.first();
this.tabs.first().addClassName('first');
this.tabs.last().addClassName('last');
this.onTabClick = this.handleTabClick.bindAsEventListener(this);
for (var i = 0, l = this.tabs.length; i < l; i ++) {
this.tabs[i].observe('click', this.onTabClick);
}
this.select();
},
handleTabClick: function (evt) {
this.activeTab = Event.findElement(evt, 'dt');
this.select();
},
select: function () {
for (var i = 0, l = this.tabs.length; i < l; i ++) {
if (this.tabs[i] == this.activeTab) {
this.tabs[i].addClassName('active');
this.tabs[i].style.zIndex = this.tabs.length + 2;
/*this.tabs[i].next('dd').show();*/
new Effect.Appear (this.tabs[i].next('dd'), { duration:0.5 });
this.tabs[i].parentNode.style.height=this.tabs[i].next('dd').getHeight() + 15 + 'px';
} else {
this.tabs[i].removeClassName('active');
this.tabs[i].style.zIndex = this.tabs.length + 1 - i;
this.tabs[i].next('dd').hide();
}
}
}
});
Anyone have an idea?
I would consider modifying how the class starts up.
initialize: function (container) {
this.container = $(container);
this.container.addClassName('tab-list');
this.tabs = this.container.select('dt.tab');
// change starts here //
var hashTab = $(window.location.hash.slice(1));
this.activeTab = ( this.tabs.include(hashTab) ? hashTab : this.tabs.first());
// change ends here //
this.tabs.first().addClassName('first');
this.tabs.last().addClassName('last');
this.onTabClick = this.handleTabClick.bindAsEventListener(this);
for (var i = 0, l = this.tabs.length; i < l; i ++) {
this.tabs[i].observe('click', this.onTabClick);
}
this.select();
}
Here, I have only changed how the initial tab is chosen. It checks for an URL fragment which is commonly known as a hash, if that identifies one of the tabs it is preselected. As a bonus the browser will also scroll to that element if possible.
Then you only need to append the tab's ID to the URL. For example you might generate the URL by;
$productUrl = Mage::getUrl('catalog/product/view', array(
'id' => $productId,
'_fragment' => 'tab_id',
));
If you've recently migrated from an earlier Magento release, e.g. from Enterprise 1.11 to Enterprise 1.12, make sure the javascript in /template/catalog/product/view.phtml
right after the foreach that generates the tabs gets updated to the 1.12 version:
<script type="text/javascript">
var collateralTabs = new Enterprise.Tabs('collateral-tabs');
Event.observe(window, 'load', function() {
collateralTabs.select();
});
</script>
surfimp's VERY helpful suggestions did not produce the desired opening of the closed tab otherwise. Once this updated javascript was added, clicking on a link to read Review or Add Your Review on the product page, jumped to the Reviews tab, even if the tab had been hidden.
Similar to Zifius' answer, you can modify the initialize function to just take another argument which will be the active tab.
Event.observe(window, 'load', function() {
new Enterprise.Tabs('collateral-tabs', $('tab_review'));
});
and then in the scripts.js (or wherever this class may exist for you)
initialize: function (container, el) {
...
this.activeTab = el;
...
}
Use whatever logic in the template you like to set 'el' to the desired value.
The reason I did it this way is because when I used Zifius' method, the desired tab would be the active tab, but the default tab's content was still displayed.
Had the same task yesterday and as I don't know about prototype much I solved it by adding another method:
selectTab: function (element) {
this.activeTab = element;
this.select();
},
Usage:
var Tabs = new Enterprise.Tabs('collateral-tabs');
Tabs.selectTab($('tabId'));
Would like to know if it's a correct approach

Resources