BASH alias running a script on another server - bash

This is either rather simple or impossible, however I can't seem to get a go with it. I'm trying to run a script located on a remote server and I have the following alias in my .bashrc:
alias fin='sh username#host.co.uk:~/scripts/finder.sh'
I have set up SSH key authentication to that host, however I am getting the following error:
sh: 0: Can't openusername#host.co.uk:~/scripts/finder.sh
Can someone please help, thanks :)

You cannot refer to a remote script as if it were a file name. You can use ssh but the syntax is slightly different.
ssh username#host.co.uk scripts/finder.sh
As an aside, functions are often better than aliases.
fin () {
ssh username#host.co.uk scripts/finder.sh "$#"
}
The "$#" is for passing arguments. If the script takes no parameters, it can be omitted.

alias fin='ssh username#host.co.uk /home/username/scripts/finder.sh'
you need to make sure finder.sh has execute permissions and runs locally on host.co.uk as user username

Related

bash: execute specifc command depending upon the input

I am able to make the code works for me in command line but what I am trying to achieve is a bit more and I am not getting how to achieve that.
For Example, I have a string MySQL Server#db1com:1111 And this contained hostname is db1.com.
Instead of copying only hostname everytime, I am using javascript functionality to extract the hostname only, I mean as below
function getHostname() {
dbiNode = process.argv.slice(2).toString();
hostname = dbiNode.split(/[#:]/)[1];
console.log(hostname)
}
getHostname()
And for now to automatically SSH I am using below command
ssh "$(node gethostname.js "MySQL Server#db1:1111")""
And it works with out any issue. What I am trying to achieve here is if I type "MySQL Server#db1:1111" in terminal, somehow I need to make my bash execute function via .bashrc where I can handle extracting hostname and SSH into that.
But how, I am not getting.
Any reference links/suggestions greatly appreciated.
You don't need node here, just add the following to your .bashrc
MySQL() {
host="${1##*#}" # remove everything before #
host="${host%%:*}" # remove everything after :
ssh "$host"
}

execute in remote machine from a shell script in local machine

shell script should be on local machine.
shell script contain two steps
a. ssh command along with password
b. sudo command along with password.
i cannot install any packages not allowed.
Please help me how to write command inside shell script.
Try this:
ssh user#server_ip "bash -s" < script.sh
using send and expect commands correctly issue fixed for me. Thank you for suggestions

How can I run a shell script via SSH such that the environment of the remote computer is similar to that of the local computer?

I welcome rephrasing of my question, because I'm not sure exactly what the problem is called.
I am trying to run a shell script via SSH using a command of the following form:
ssh -o StrictHostKeyChecking=no lxplus0035 "cd ~/test; bash script1.sh"
When I do this, the complex script script1.sh breaks with many syntax errors, operand errors and other errors. An example is as follows:
stty: standard input: Invalid argument
The script works fine when run directly, not via SSH, in the local system and in the remote system (when connected in an SSH session). Why might executing the script via SSH cause these problems?
The stty problem is not related to your environment, it's a result of the SSH command not allocating you a TTY (What is Pseudo TTY-Allocation? (SSH and Github)). Adding -t argument for ssh should fix it.
Further information:
http://go2linux.garron.me/linux/2010/11/ssh-t-open-pseudo-tty-run-commands-remote-server-809/
http://capistranorb.com/documentation/faq/why-does-something-work-in-my-ssh-session-but-not-in-capistrano/

How can I ssh directly to a particular directory?

I often have to login to one of several servers and go to one of several directories on those machines. Currently I do something of this sort:
localhost ~]$ ssh somehost
Welcome to somehost!
somehost ~]$ cd /some/directory/somewhere/named/Foo
somehost Foo]$
I have scripts that can determine which host and which directory I need to get into but I cannot figure out a way to do this:
localhost ~]$ go_to_dir Foo
Welcome to somehost!
somehost Foo]$
Is there an easy, clever or any way to do this?
You can do the following:
ssh -t xxx.xxx.xxx.xxx "cd /directory_wanted ; bash --login"
This way, you will get a login shell right on the directory_wanted.
Explanation
-t Force pseudo-terminal allocation. This can be used to execute arbitrary screen-based programs on a remote machine, which can be very useful, e.g. when implementing menu services.
Multiple -t options force tty allocation, even if ssh has no local tty.
If you don't use -t then no prompt will appear.
If you don't add ; bash then the connection will get closed and return control to your local machine
If you don't add bash --login then it will not use your configs because its not a login shell
You could add
cd /some/directory/somewhere/named/Foo
to your .bashrc file (or .profile or whatever you call it) at the other host. That way, no matter what you do or where you ssh from, whenever you log onto that server, it will cd to the proper directory for you, and all you have to do is use ssh like normal.
Of curse, rogeriopvl's solution works too, but it's a tad bit more verbose, and you have to remember to do it every time (unless you make an alias) so it seems a bit less "fun".
My preferred approach is using the SSH config file (described below), but there are a few possible solutions depending on your usages.
Command Line Arguments
I think the best answer for this approach is christianbundy's reply to the accepted answer:
ssh -t example.com "cd /foo/bar; exec \$SHELL -l"
Using double quotes will allow you to use variables from your local machine, unless they are escaped (as $SHELL is here). Alternatively, you can use single quotes, and all of the variables you use will be the ones from the target machine:
ssh -t example.com 'cd /foo/bar; exec $SHELL -l'
Bash Function
You can simplify the command by wrapping it in a bash function. Let's say you just want to type this:
sshcd example.com /foo/bar
You can make this work by adding this to your ~/.bashrc:
sshcd () { ssh -t "$1" "cd \"$2\"; exec \$SHELL -l"; }
If you are using a variable that exists on the remote machine for the directory, be sure to escape it or put it in single quotes. For example, this will cd to the directory that is stored in the JBOSS_HOME variable on the remote machine:
sshcd example.com \$JBOSS_HOME
SSH Config File
If you'd like to see this behavior all the time for specific (or any) hosts with the normal ssh command without having to use extra command line arguments, you can set the RequestTTY and RemoteCommand options in your ssh config file.
For example, I'd like to type only this command:
ssh qaapps18
but want it to always behave like this command:
ssh -t qaapps18 'cd $JBOSS_HOME; exec $SHELL'
So I added this to my ~/.ssh/config file:
Host *apps*
RequestTTY yes
RemoteCommand cd $JBOSS_HOME; exec $SHELL
Now this rule applies to any host with "apps" in its hostname.
For more information, see http://man7.org/linux/man-pages/man5/ssh_config.5.html
I've created a tool to SSH and CD into a server consecutively – aptly named sshcd. For the example you've given, you'd simply use:
sshcd somehost:/some/directory/somewhere/named/Foo
Let me know if you have any questions or problems!
Based on additions to #rogeriopvl's answer, I suggest the following:
ssh -t xxx.xxx.xxx.xxx "cd /directory_wanted && bash"
Chaining commands by && will make the next command run only when the previous one was successful (as opposed to using ;, which executes commands sequentially). This is particularly useful when needing to cd to a directory performing the command.
Imagine doing the following:
/home/me$ cd /usr/share/teminal; rm -R *
The directory teminal doesn't exist, which causes you to stay in the home directory and remove all the files in there with the following command.
If you use &&:
/home/me$ cd /usr/share/teminal && rm -R *
The command will fail after not finding the directory.
In my very specific case, I just wanted to execute a command in a remote host, inside a specific directory from a Jenkins slave machine:
ssh myuser#mydomain
cd /home/myuser/somedir
./commandThatMustBeRunInside_somedir
exit
But my machine couldn't perform the ssh (it couldn't allocate a pseudo-tty I suppose) and kept me giving the following error:
Pseudo-terminal will not be allocated because stdin is not a terminal
I could get around this issue passing "cd to dir + my command" as a parameter of the ssh command (to not have to allocate a Pseudo-terminal) and by passing the option -T to explicitly tell to the ssh command that I didn't need pseudo-terminal allocation.
ssh -T myuser#mydomain "cd /home/myuser/somedir; ./commandThatMustBeRunInside_somedir"
I use the environment variable CDPATH
going one step further with the -t idea. I keep a set of scripts calling the one below to go to specific places in my frequently visited hosts. I keep them all in ~/bin and keep that directory in my path.
#!/bin/bash
# does ssh session switching to particular directory
# $1, hostname from config file
# $2, directory to move to after login
# can save this as say 'con' then
# make another script calling this one, e.g.
# con myhost repos/i2c
ssh -t $1 "cd $2; exec \$SHELL --login"
My answer may differ from what you really want, but I write here as may be useful for some people. In my solution you have to enter into the directory once and then every new ssh session goes to the same dir (after the first logout).
How to ssh to the same directory you have been in your last login.
(I assume you use bash on the remote node.)
Add this line to your ~/.bash_logout on the remote node(!):
echo $PWD > ~/.bash_lastpwd
and these lines to the ~/.bashrc file (still on the remote node!)
if [ -f ~/.bash_lastpwd ]; then
cd $(cat ~/.bash_lastpwd)
fi
This way you save your current path on every logout and .bashrc put you into that directory after login.
ps: You can tweak it further like using the SSH_CLIENT variable to decide to go into that directory or not, so you can differentiate between local logins and ssh or even between different ssh clients.
Another way of going to directly after logging in is create "Alias". When you login into your system just type that alias and you will be in that directory.
Example : Alias = myfolder '/var/www/Folder'
After you log in to your system type that alias (this works from any part of the system)
this command if not in bashrc will work for current session. So you can also add this alias to bashrc to use that in future
$ myfolder => takes you to that folder
I know this has been answered ages ago but I found the question while trying to incorporate an ssh login in a bash script and once logged in run a few commands and log back out and continue with the bash script. The simplest way I found which hasnt been mentioned elsewhere because it is so trivial is to do this.
#!/bin/bash
sshpass -p "password" ssh user#server 'cd /path/to/dir;somecommand;someothercommand;exit;'
Connect With User
In case if you don't know this, you can use this to connect by specifying both user and host
ssh -t <user>#<Host domain / IP> "cd /path/to/directory; bash --login"
Example: ssh -t admin#test.com "cd public_html; bash --login"
You can also append the commands to be executed on every login by appending it in the double quotes with a ; before each command
Unfortunately, the suggested solution (of #rogeriopvl) doesn't work when you use multiple hops, so I found another one.
On remote machine add into ~/.bashrc the following:
[ "x$CDTO" != "x" ] && cd $CDTO
This allows you to specify the desired target directory on command line in this way:
ssh -t host1 ssh -t host2 "CDTO=/desired_directory exec bash --login"
Sure, this way can be used for a single hop too.
This solution can be combined with the usefull tip of #redseven for greater flexibilty (if no $CDTO, go to saved directory, if exists).
SSH itself provides a means of communication, it does not know anything about directories. Since you can specify which remote command to execute (this is - by default - your shell), I'd start there.
simply modify your home with the command:
usermod -d /newhome username

How do you use ssh in a shell script?

When I try to use an ssh command in a shell script, the command just sits there. Do you have an example of how to use ssh in a shell script?
Depends on what you want to do, and how you use it. If you just want to execute a command remotely and safely on another machine, just use
ssh user#host command
for example
ssh user#host ls
In order to do this safely you need to either ask the user for the password during runtime, or set up keys on the remote host.
First, you need to make sure you've set up password-less (public key login). There are at least two flavors of ssh with slightly different configuration file formats. Check the ssh manpage on your system, consult you local sysadmin or head over to How do I setup Public-Key Authentication?.
To run ssh in batch mode (such as within a shell script), you need to pass a command you want to be run. The syntax is:
ssh host command
If you want to run more than one command at the same time, use quotes and semicolons:
ssh host "command1; command2"
The quotes are needed to protect the semicolons from the shell interpreter. If you left them out, only the first command would be run remotely and all the rest would be run on the local machine.
You need to put your SSH public key into the ~/.ssh/authorized_keys file on the remote host. Then you'll be able to SSH to that host password-less.
Alternatively you can use ssh-agent. I would recommend against storing the password in the script.
You can use expect command to populate the username/password info.
The easiest way is using a certificate for the user that runs the script.
A more complex one implies adding to stdin the password when the shell command asks for it. Expect, perl libraries, show to the user the prompt asking the password (if is interactive, at least), there are a lot of choices.

Resources