I currently have a RemoteCommand, RemoteCommand sudo su - admin-user set up in my ssh config that allows me to connect to a system and immediately switch users to an admin user. This is because I must only make changes to the system as that admin-user, the admin-user does not have a password, and I am not allowed to add my public key to the system to connect without specifying a password. This works perfectly; I'm able to login as "login-user", and it immediately switches me to the admin-user.
However, I want to do the same, and create a temporary function that would allow me to run a common command in a more shorthand manner. This is because I am not allowed to change the admin-user's bashrc.
My thought in setting this up was to do the following in my ssh config:
HOST SYSTEM
Hostname 12.34.56.78
User login-user
RemoteCommand sudo -Hu admin-user /usr/bin/bash --init-file <(echo ". ~/bashrc; function testy() { ls ; }") -li
...
In this case, I'm just testing with a function that runs ls. Just using a named pipe to source the normal bashrc and add a func to the new shell via an init file/rc file.
This creates an interactive bash shell as the admin-user as expected, but upon trying to run the function testy in this shell, I get bash: testy: command not found. Doing the same without switching users in the same step works, but not if I add the flags to run the shell as admin-user. I can't figure out how to get this working. Any help using this approach or another is greatly appreciated!
Likely a named pipe sharing issue. You can use another wrapper shell:
HOST SYSTEM
Hostname 12.34.56.78
User login-user
RemoteCommand sudo -Hiu admin-user /usr/bin/bash -c 'exec /usr/bin/bash --init-file <(echo ". ~/bashrc; function testy() { ls ; }")'
...
. ~/.bashrc also likely can be unnecessary but that's besides the main point.
This question has a good answer for how to put multiple command in an alias for bash.
But how would you do it in the case where you first need to ssh into a server, then do something like change a directory and then launch jupyter notebook?
I tried something like:
alias shortcut='ssh user#server -p 1234 -L 5678:localhost:91011; cd ~/somedir; jupyter notebook --ip=127.0.0.1
Maybe it's because my ssh requires me to type in a password, the last 2 commands aren't being executed.
There are some possible improvements for further convenience, if allowed by the system configuration.
If your need include executing a series of commands on the remote host, and you need to repeat this often, it's reasonable to put the commands in their own shell script and place it on the remote host.
For example in this case the script could be just
#!/bin/sh
cd ~/somedir && jupyter notebook --ip=127.0.0.1
Saving them in a file, add execution bit to it, and you can start the session like ssh user#server -p 1234 -L 5678:localhost:91011 path/to/script.sh
This is touched in this question but my preferred way is the low-score one about putting the script on remote -- I'd like to have each resource reside where they belong.
There's also the problem about what you want to do after starting the session. It seems the command is to start a server process that runs the Jupyter web service. If you just want to stay in the SSH session while monitoring the server, then the simple command should suffice. But if you want to keep the server in the background and log the output (and likely leave the SSH session for now) it's possible to run the server with nohup and redirect its output, by putting in the script something like
nohup jupyter notebook --ip="127.0.0.1" >> stdout.log 2>> stderr.log &
echo "$!" > jupyter-notebook.pid
The second command saves the PID in the file so it'll be easier to check or terminate it later without manually searching for the background process.
I wish to run a script on the remote system and then wish to stay there.
Running following script:-
ssh user#remote logs.sh
This do run the script but after that I am back to my host system. i need to stay on remote one. I tried with..
ssh user#remote logs.sh;bash -l
somehow it solves the problem but still not working exactly as a fresh login as the command:-
ssh user#remote
Or it will be better if i could include something in my script that would open the bash terminal in the same directory where the script was running. Please suggest.
Try this:
ssh -t user#remote 'logs.sh; bash -l'
The quotes are needed to pass both commands to ssh. The -t option forces a pseudo-tty allocation.
Discussion
Consider:
ssh user#remote logs.sh;bash -l
When the shell parses this line, it splits it into two commands. The first is:
ssh user#remote logs.sh
This runs logs.sh on the remote machine. The second command is:
bash -l
This opens a login shell on the local machine.
The quotes were added above to prevent the shell from splitting up the commands this way.
I have a shell script, which I am using to access the SMB Client:
#!/bin/bash
cd /home/username
smbclient //link/to/server$ password -W domain -U username
recurse
prompt
mput baclupfiles
exit
Right now, the script runs, accesses the server, and then asks for a manual input of the commands.
Can someone show me how to get the commands recurse, prompt, mput baclupfiles and exit commands to be run by the shell script please?
I worked out a solution to this, and sharing for future references.
#!/bin/bash
cd /home/username
smbclient //link/to/server$ password -W domain -U username << SMBCLIENTCOMMANDS
recurse
prompt
mput backupfiles
exit
SMBCLIENTCOMMANDS
This will enter the commands between the two SMBCLIENTCOMMANDS statements into the smb terminal.
smbclient accepts the -c flag for this purpose.
-c|--command command string
command string is a semicolon-separated list of commands to be executed instead of
prompting from stdin.
-N is implied by -c.
This is particularly useful in scripts and for printing stdin to the server, e.g.
-c 'print -'.
For instance, you might run
$ smbclient -N \\\\Remote\\archive -c 'put /results/test-20170504.xz test-20170504.xz'
smbclient disconnects when it is finished executing the commands.
smbclient //link/to/server$ password -W domain -U username -c "recurse;prompt;mput backupfiles"
I would comment to Calchas's answer which is the correct approach-but did not directly answer OP's question-but I am new and don't have the reputation to comment.
Note that the -c listed above is semicolon separated list of commands (as documented in other answers), thus adding recurse and prompt enables the mput to copy without prompting.
You may also consider using the -A flag to use a file (or a command that decrypts a file to pass to -A) to fully automate this script
smbclient //link/to/server$ password -A ~/.smbcred -c "recurse;prompt;mput backupfiles"
Where the file format is:
username = <username>
password = <password>
domain = <domain>
workgroup = <workgroup>
workgroup is optional, as is domain, but usually needed if not using a domain\username formatted username.
I suspect this post is WAY too late to be useful to this particular need, but maybe useful to other searchers, since this thread lead me to the more elegant answer through -c and semicolons.
I would take a different approach using autofs with smb. Then you can eliminate the smbclient/ftp like approach and refactor your shell script to use other functions like rsync to move your files around. This way your credentials aren't stored in the script itself as well. You can bury them somewhere on your fs and make it read only by root an no one else.
I have to run a local shell script (windows/Linux) on a remote machine.
I have SSH configured on both machine A and B. My script is on machine A which will run some of my code on a remote machine, machine B.
The local and remote computers can be either Windows or Unix based system.
Is there a way to run do this using plink/ssh?
If Machine A is a Windows box, you can use Plink (part of PuTTY) with the -m parameter, and it will execute the local script on the remote server.
plink root#MachineB -m local_script.sh
If Machine A is a Unix-based system, you can use:
ssh root#MachineB 'bash -s' < local_script.sh
You shouldn't have to copy the script to the remote server to run it.
This is an old question, and Jason's answer works fine, but I would like to add this:
ssh user#host <<'ENDSSH'
#commands to run on remote host
ENDSSH
This can also be used with su and commands which require user input. (note the ' escaped heredoc)
Since this answer keeps getting bits of traffic, I would add even more info to this wonderful use of heredoc:
You can nest commands with this syntax, and that's the only way nesting seems to work (in a sane way)
ssh user#host <<'ENDSSH'
#commands to run on remote host
ssh user#host2 <<'END2'
# Another bunch of commands on another host
wall <<'ENDWALL'
Error: Out of cheese
ENDWALL
ftp ftp.example.com <<'ENDFTP'
test
test
ls
ENDFTP
END2
ENDSSH
You can actually have a conversation with some services like telnet, ftp, etc. But remember that heredoc just sends the stdin as text, it doesn't wait for response between lines
I just found out that you can indent the insides with tabs if you use <<-END!
ssh user#host <<-'ENDSSH'
#commands to run on remote host
ssh user#host2 <<-'END2'
# Another bunch of commands on another host
wall <<-'ENDWALL'
Error: Out of cheese
ENDWALL
ftp ftp.example.com <<-'ENDFTP'
test
test
ls
ENDFTP
END2
ENDSSH
(I think this should work)
Also see
http://tldp.org/LDP/abs/html/here-docs.html
Also, don't forget to escape variables if you want to pick them up from the destination host.
This has caught me out in the past.
For example:
user#host> ssh user2#host2 "echo \$HOME"
prints out /home/user2
while
user#host> ssh user2#host2 "echo $HOME"
prints out /home/user
Another example:
user#host> ssh user2#host2 "echo hello world | awk '{print \$1}'"
prints out "hello" correctly.
This is an extension to YarekT's answer to combine inline remote commands with passing ENV variables from the local machine to the remote host so you can parameterize your scripts on the remote side:
ssh user#host ARG1=$ARG1 ARG2=$ARG2 'bash -s' <<'ENDSSH'
# commands to run on remote host
echo $ARG1 $ARG2
ENDSSH
I found this exceptionally helpful by keeping it all in one script so it's very readable and maintainable.
Why this works. ssh supports the following syntax:
ssh user#host remote_command
In bash we can specify environment variables to define prior to running a command on a single line like so:
ENV_VAR_1='value1' ENV_VAR_2='value2' bash -c 'echo $ENV_VAR_1 $ENV_VAR_2'
That makes it easy to define variables prior to running a command. In this case echo is our command we're running. Everything before echo defines environment variables.
So we combine those two features and YarekT's answer to get:
ssh user#host ARG1=$ARG1 ARG2=$ARG2 'bash -s' <<'ENDSSH'...
In this case we are setting ARG1 and ARG2 to local values. Sending everything after user#host as the remote_command. When the remote machine executes the command ARG1 and ARG2 are set the local values, thanks to local command line evaluation, which defines environment variables on the remote server, then executes the bash -s command using those variables. Voila.
<hostA_shell_prompt>$ ssh user#hostB "ls -la"
That will prompt you for password, unless you have copied your hostA user's public key to the authorized_keys file on the home of user .ssh's directory. That will allow for passwordless authentication (if accepted as an auth method on the ssh server's configuration)
I've started using Fabric for more sophisticated operations. Fabric requires Python and a couple of other dependencies, but only on the client machine. The server need only be a ssh server. I find this tool to be much more powerful than shell scripts handed off to SSH, and well worth the trouble of getting set up (particularly if you enjoy programming in Python). Fabric handles running scripts on multiple hosts (or hosts of certain roles), helps facilitate idempotent operations (such as adding a line to a config script, but not if it's already there), and allows construction of more complex logic (such as the Python language can provide).
cat ./script.sh | ssh <user>#<host>
chmod +x script.sh
ssh -i key-file root#111.222.3.444 < ./script.sh
Try running ssh user#remote sh ./script.unx.
Assuming you mean you want to do this automatically from a "local" machine, without manually logging into the "remote" machine, you should look into a TCL extension known as Expect, it is designed precisely for this sort of situation. I've also provided a link to a script for logging-in/interacting via SSH.
https://www.nist.gov/services-resources/software/expect
http://bash.cyberciti.biz/security/expect-ssh-login-script/
ssh user#hostname ". ~/.bashrc;/cd path-to-file/;. filename.sh"
highly recommended to source the environment file(.bashrc/.bashprofile/.profile). before running something in remote host because target and source hosts environment variables may be deffer.
I use this one to run a shell script on a remote machine (tested on /bin/bash):
ssh deploy#host . /home/deploy/path/to/script.sh
if you wanna execute command like this
temp=`ls -a`
echo $temp
command in `` will cause errors.
below command will solve this problem
ssh user#host '''
temp=`ls -a`
echo $temp
'''
If the script is short and is meant to be embedded inside your script and you are running under bash shell and also bash shell is available on the remote side, you may use declare to transfer local context to remote. Define variables and functions containing the state that will be transferred to the remote. Define a function that will be executed on the remote side. Then inside a here document read by bash -s you can use declare -p to transfer the variable values and use declare -f to transfer function definitions to the remote.
Because declare takes care of the quoting and will be parsed by the remote bash, the variables are properly quoted and functions are properly transferred. You may just write the script locally, usually I do one long function with the work I need to do on the remote side. The context has to be hand-picked, but the following method is "good enough" for any short scripts and is safe - should properly handle all corner cases.
somevar="spaces or other special characters"
somevar2="!##$%^"
another_func() {
mkdir -p "$1"
}
work() {
another_func "$somevar"
touch "$somevar"/"$somevar2"
}
ssh user#server 'bash -s' <<EOT
$(declare -p somevar somevar2) # transfer variables values
$(declare -f work another_func) # transfer function definitions
work # call the function
EOT
The answer here (https://stackoverflow.com/a/2732991/4752883) works great if
you're trying to run a script on a remote linux machine using plink or ssh.
It will work if the script has multiple lines on linux.
**However, if you are trying to run a batch script located on a local
linux/windows machine and your remote machine is Windows, and it consists
of multiple lines using **
plink root#MachineB -m local_script.bat
wont work.
Only the first line of the script will be executed. This is probably a
limitation of plink.
Solution 1:
To run a multiline batch script (especially if it's relatively simple,
consisting of a few lines):
If your original batch script is as follows
cd C:\Users\ipython_user\Desktop
python filename.py
you can combine the lines together using the "&&" separator as follows in your
local_script.bat file:
https://stackoverflow.com/a/8055390/4752883:
cd C:\Users\ipython_user\Desktop && python filename.py
After this change, you can then run the script as pointed out here by
#JasonR.Coombs: https://stackoverflow.com/a/2732991/4752883 with:
`plink root#MachineB -m local_script.bat`
Solution 2:
If your batch script is relatively complicated, it may be better to use a batch
script which encapsulates the plink command as well as follows as pointed out
here by #Martin https://stackoverflow.com/a/32196999/4752883:
rem Open tunnel in the background
start plink.exe -ssh [username]#[hostname] -L 3307:127.0.0.1:3306 -i "[SSH
key]" -N
rem Wait a second to let Plink establish the tunnel
timeout /t 1
rem Run the task using the tunnel
"C:\Program Files\R\R-3.2.1\bin\x64\R.exe" CMD BATCH qidash.R
rem Kill the tunnel
taskkill /im plink.exe
This bash script does ssh into a target remote machine, and run some command in the remote machine, do not forget to install expect before running it (on mac brew install expect )
#!/usr/bin/expect
set username "enterusenamehere"
set password "enterpasswordhere"
set hosts "enteripaddressofhosthere"
spawn ssh $username#$hosts
expect "$username#$hosts's password:"
send -- "$password\n"
expect "$"
send -- "somecommand on target remote machine here\n"
sleep 5
expect "$"
send -- "exit\n"
You can use runoverssh:
sudo apt install runoverssh
runoverssh -s localscript.sh user host1 host2 host3...
-s runs a local script remotely
Useful flags:
-g use a global password for all hosts (single password prompt)
-n use SSH instead of sshpass, useful for public-key authentication
If it's one script it's fine with the above solution.
I would set up Ansible to do the Job. It works in the same way (Ansible uses ssh to execute the scripts on the remote machine for both Unix or Windows).
It will be more structured and maintainable.
It is unclear if the local script uses locally set variables, functions, or aliases.
If it does this should work:
myscript.sh:
#!/bin/bash
myalias $myvar
myfunction $myvar
It uses $myvar, myfunction, and myalias. Let us assume they is set locally and not on the remote machine.
Make a bash function that contains the script:
eval "myfun() { `cat myscript.sh`; }"
Set variable, function, and alias:
myvar=works
alias myalias='echo This alias'
myfunction() { echo This function "$#"; }
And "export" myfun, myfunction, myvar, and myalias to server using env_parallel from GNU Parallel:
env_parallel -S server -N0 --nonall myfun ::: dummy
Extending answer from #cglotr. In order to write inline command use printf, it useful for simple command and it support multiline using char escaping '\n'
example :
printf "cd /to/path/your/remote/machine/log \n tail -n 100 Server.log" | ssh <user>#<host> 'bash -s'
See don't forget to add bash -s
I created a solution that works better for me by combining the use of a heredoc from Yarek T's answer with the piped cat method from cglotr's answer along with some other tricks for non-interactive login (using sshpass), using variables from the local and remote host in the script, and enabling sudo commands. The code is longer just because it includes some additional tricks that are likely desired, but the original questioner didn't ask for them.
The problem I have with Yarek's answer is that all the warnings and commands in the heredoc print to the screen. The problem I have with cglotr's answer is that is requires a script file and a complex command with additional interaction to execute the script. With my solution, I write a script that does everything by simply calling the script with the remote host IP address as the first argument like this:
./MYSCRIPT REMOTE_IP_ADDRESS
The script to be run on the remote host is saved to a variable within the script on the local host using a heredoc so that you don't need to do any quote escaping. Then, the variable containing the script is echo piped to sshpass. Be sure to indent the commands with tabs and not spaces (you'll get spaces instead of tabs when you copy the code). Here is an example of the remote script within the local script.
!/bin/bash
# Input argument 1 should be the target host IP address (required)
RX_IP="/(\b25[0-5]|\b2[0-4][0-9]|\b[01]?[0-9][0-9]?)(\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)){3}/"
IS_IP=$(echo $1 | sed -nr "${RX_IP}p" | wc -l)
if (( $IS_IP )); then
USERNAME=remoteuser
HOSTNAME=$1
# Export the SSH password to environment variable for sshpass and sudo.
# The space before the command prevents saving the command to history.
export SSHPASS=mypassword;
while read -r -d '' SCRIPT <<-EOS
# Enable sudo commands with the following command.
# The space before echo prevents saving the command to history.
echo $SSHPASS | sudo -Sv
# Do stuff here. Escape variables to be be accessed on the remote host.
# For example, escape print variable in an awk command:
# This command lists all USB block device partitions.
ls -l /dev /dev/mapper | awk '/^b/ && /sd[a-z][1-9]/ {print \$10}'
exit
EOS
echo "$SCRIPT" | sshpass -e ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null ${USERNAME}#${HOSTNAME} &>/dev/null
echo 'DONE'
else
echo "Missing IP address of target host."
echo "Usage: ./SCRIPT_NAME IP_ADDRESS
fi
You need to install sshpass on the local host like this (for Debian based distros).
sudo apt install sshpass
There is another approach ,you can copy your script in your host with scp command then execute it easily .
First, copy the script over to Machine B using scp
[user#machineA]$ scp /path/to/script user#machineB:/home/user/path
Then, just run the script
[user#machineA]$ ssh user#machineB "/home/user/path/script"
This will work if you have given executable permission to the script.