I need to get JSESSIONID from cookie data in jmeter but I am failing in doing so.
Process I am following -
In my .jmx file I have added regular expression extractor as:
- Reference Name - session_id
- Regular Expression - Cookie Data\s*:\sCMS_JSESSIONID=([^;])
- Template - $1$
- Match - 0
- Default Value - Not found
This I have added under my second url request.
I am trying to extract JSESSION id from "Request" page which comes under View Results tree:
Cookie Data:
CMS_JSESSIONID=8456329D51C6D7F3B924325A336CA31E
And for checking I have added debug sampler but every time result is showing "Not found".
Kindly please help.
Thanks,
Nitish
According to Wikipedia cookies are coming with Set-Cookie header so you need to amend your Regular Expression Extractor like:
Field to check: Response Headers
Regular Expression: Set-Cookie\s*:\sCMS_JSESSIONID=([^;])
However there is an easier way to get the cookie value (steps 1 and 2 required only once)
Add CookieManager.save.cookies=true line to user.properties file
Restart JMeter
Add HTTP Cookie Manager to your Test Plan
Access your cookie value as ${COOKIE_CMS_JSESSIONID} where required.
Related
I do a POST request using Jmeter and I parse the JSON response using the JSON extractor. When i use the debug sampler I could see the Variable is assigned with the value properly but that value goes as null in the subsequent request
Below is the request URL for the next sample /XXX/XXX/XXX/XX/${recordingjobid}
but this value recordingjobid is not substituted with the value.
I can only think of not proper placement of the JSON Extractor.
For example if you have it at the same level as several samplers - it will be run after every of them (including the Debug Sampler) and each next one will be overwriting the value set by the previous one as JMeter Variables are local to the thread and don't allow duplicates.
So my expectation is that if you move the JSON Extractor to be a child of the request which returns the JSON - it should resolve your issue.
More information: JMeter Scoping Rules - The Ultimate Guide
I am extracting several variables from a login response, using "Regular Expression Extractor" post processors. Most of them work when I reuse the variable, but one doesn't.
The regex extractor has the following settings:
Apply to: Main sample only
Field to check: Body
Name of variable: id_token
Regular Expression: <input type="hidden" name="id_token" value="([^"]+)"
Template:
Match No.:
Default Value:
Use empty default value: (unchecked)
Then in a later POST HTTP request I use the parameter:
Name, Value, URL Encode?, Content-Type, Include Equals
id_token, ${id_token_g1}, true, text/plain, true
When running the test in the "View Results Tree" listener the same POST request's POST data contains
&id_token=%24%7Bid_token_g1%7D
Instead of the value of id_token_g1.
Other variables in the same POST data are being completed correctly.
The Debug PostProcessor from the previous request contains
id_token_g1=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSIsImtpZCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSJ9.eyJpc3MiOiJodHRwczovL2xvY2FsaG9zdDo0NDM4Ny9pZHMiLCJhdWQiOiJkOGVjZjYzMi1mNzE0LTQ2MzEtOGViOS1lYmUzMDI5OGNjMGYiLCJleHAiOjE1Mjk1MDE3MTgsIm5iZiI6MTUyOTUwMTQxOCwibm9uY2UiOiI2MzY2NTA5ODIwNTI4Mzc0MTguWW1aa016ZzFNVEV0TXpjeVlTMDBObUppTFdFM016UXRaVFV3WkRrd01ESXdNekEwTWpnM09URTFZVEl0TURJek1DMDBNalF6TFdGbU1HTXRObVExWmpjNU5XWmxNVEUxIiwiaWF0IjoxNTI5NTAxNDE4LCJhdF9oYXNoIjoiN1Y0cGdWWmVpc2pJV3NXM1ZMTTNadyIsImNfaGFzaCI6Ik8wd3ZKanBSS2NIUnJDOExnUkhfeWciLCJzaWQiOiJiZjc4YWJjMDIxMzhkMDBkMmVlYjk4Y2E3ODg2OWQxZiIsInN1YiI6ImU2NWE0M2MwLTllY2EtNDRjYi05YzYzLWU2NjhhMzNhNWQyYiIsImF1dGhfdGltZSI6MTUyOTUwMTQxNiwiaWRwIjoiaWRzcnYiLCJhbXIiOlsicGFzc3dvcmQiXX0.p8Wn1_SPf2wA1YFby4-ftXGfCtLQaHf6_XXaQJQFF_9SdOHDG2ICVKXs3Jx4UwwyQPDDnKl7rTQINRfb1sfNLnhGsuxr5BoDQaddyG24afT4-quwhl3XDb1jPIMEk-3l-6Rnhdr-UIzHXpMZaaYXE9rdCygI7wqT8REbL8nctQv9GTgh3O751NMjY4FYmj4QDBYrsp9sHJEx_sysMCHPscOm6vnIakKfuVGrVE2qBOQu2PfP3i29npDgNmJ2bmBniljnTMFI57w1vSq8mK2LIYMqoJyy6iudcxAlfRTGzEkezetmH3eIChQIipLUHHb-NmyImtOt-tdUUZXh_Rwq6r7YcwW6zfEPmVFunuHfxc5sB9fZEEzsZLoczB7UeWfBekYGMIK1AKp1BTkQA-kwcqbWIn66Hdjrmepnq3A6nD6pEB-I2tHMgbHIogwHqsGM61OBAGC2y7As3BdF-zepm1m9jISmRX7hiU8u6I1TOhwWIz8VKjlkdmqTQf1lY6I7yAq2Rwtu0zrQ--6el_lB7emX1YvD8whSFpQjI4YNpWJWRZ9ALXC7CudIgN5D4tgzSmEpQrcK-NasXWYf6RMfeDhYTYAbAChgwJ3KwWk6u_5OsX2LgQGbAg23BH9O_9rGg84DTgHM6IMlQG_loX2PnL8B5yqxydbJsz6CBdiLqKg
I have the same issue with session_state_g1
session_state_g1=XZkcgcg9i_FqlFIS-scHuHqMdm5jepyCSSFkF_S4Dx8.99d68c0a8e802c8767d22fb019bd34b5
But not with
access_token_g1=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSIsImtpZCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSJ9.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.Z2RTMN6NGwC1e8bJANmzvA9rUyo03vCpA3TTNylbdR8EpOvaktgHXHjWCFzxlaXeiL-24DlmVoq3qPHRx0u03nr8ZRD2fb9R_OeHxZ-gVr-2D1Ash1f_429J_4U7zjQfAQSOKHHamzTocSl0orLuvQdc9-oAydPCzpp82UbEDwsnQl_E52dK_LEB4eSiV3sB8rSpmZkmnhCmuSh9iUuMEOmA_zIs2cH_exFWjv5WXbZ8gKR-ATrPNuzoDpghMNZs-Of-dZwsaHfSJpV8C12DQ6wZq-w7m6v2szUpgJh1kHafKzM8Gm8-nMAAPV83hbdALFVvsF9tfcLjin3OEdytsfsfRLDEHLh4E-vo-LyAeHV-TKGuvX60-6tdQsSQXY-egVx1W7NiObmLbFzdRGAiV--tk8QHJ8Vf-nVAT00YXeQxEdMl1lqJFNuNOFxoNXL1ud_frUv1c2xwcnCH0hBpt2avWqN72Bj-15j6uube7IPIVp20NpT0M7FujohB-wQLfVJ8d7Ac_AVNScqasdijpTP5DzmsFybvXAu8n0MEcYHYF0-C8_d0EWW7GxpSEeeVFqKNk7JFgXEo1ta_5Yu7XDpwG7evzMFMw49cImZgcQlxrq3oDnl-qo6r9UXOfvS5QoDILU6dqYUpRSS1-Mz4_JbOmEs78v5ixcrm94PfNis
I have the same problem if I update the name of the HTTP Request sampler (it shows as ${id_token_g1} in the "View Results Tree" listener)
Any ideas what I'm doing wrong?
Make sure your setup is following JMeter Scoping Rules, i.e. you should have setup like:
Open Login Page
Regular Expression Extractor
Perform Login
Make sure you have this hidden input with name id_token in the response data. JMeter can be configured to store response data in .jtl results file, you need to add next 2 lines in user.properties file:
jmeter.save.saveservice.output_format=xml
jmeter.save.saveservice.response_data=true
Don't forget to restore the default configuration once you figure out the cause of the problem. See Results file configuration for more details.
Regular expressions is not the best choice for parsing HTML responses as they can be very fragile in case of markup change (changed order of HTML attributes or the input definition becomes multi-line). So consider switching to CSS/JQuery Extractor instead, the relevant configuration would be something like:
Reference Name: anything meaningful, you can keep id_token
CSS/JQuery Expression: input[id=name]
Attribute: value
In 2nd POST request you can refer the extracted value as ${id_token}
1.Follow Jmeter Scoping Rules.
2.To your regular expression you can give template as $1$ and use ${id_token} instead of ${id_token_g1}.
For more information on regular expression extractors
follow this link.
You can use this website to test your regular expressions.
Let me know if it helps..
I have a issue in passing dynamic value in request header of jmeter script. Here is the sequence:
Http Request1: Regular expression extractor for extracting the dynamic value from Response Header -- this is ok , variable C_Xscrftokenid2 stores the dynamic string.
Http request2: Pass this C_Xscrftokenid2 Dynamic value to the request Header (web_add_header..)--> Failing
Reason:${C_Xscrftokenid2}-> in the output i dont see the value inside the braces getting replaced with the dynamic value instead i simply see the output as below:
Request Headers:
MaxDataServiceVersion: 2.0
X-Requested-With: XMLHttpRequest
x-csrf-token: ${C_Xscrftokenid2}
May i know the reason?
Thank you.
Make sure in your Regular expression extractor field to check is set to Response Headers as shown below
In your HTTP request 2 Header Manager use ${Variable_Name} to pass extracted variable.
I would suggest you to add a debug sampler and see if it is extracting the variable correctly or not.
If you are getting an empty value in debug sampler result then the problem could be with regular expression you are trying to extract.
In my case i wanted to extract X-Frame-Options from response headers and pass it to next header its working as expected
Follow this link for more information on extracting variables
Check your "HTTP Header Manager" is under the "HTTP sampler" and not at the same level.
Hope this help.
I record my script from internet explorer using JMeter version 3.3 but when I run it the first HTTP request created a new session but the next request is nothing changed it is because the session id of the second request is indicated to its path unlike the first request.
So this is my question, How to use session id from the previous request and put it to the path in the second request. Please see the image below
Add Regular Expression Extractor as a child of the first request and configure it as follows:
Reference Name: anything meaningful, i.e. SessionId
Regular Expression: SessionId=([+-]?\d+)
Template: $1$
Replace hard-coded recorded value in 2nd request with ${SessionId}
References:
JMeter: Regular Expressions
Using RegEx (Regular Expression Extractor) with JMeter
Perl 5 Regex Cheat sheet
I have generated a jmeter script.
But I'm not getting anything in response data (View tree listner).
I'm getting Response code: 302 and Response message: Moved Temporarily in response header (View tree listner) also giving the URL to which it is redirected in Location field in response header.
I want this redirected URL to be displayed in response tab.
the url i wnat in response data]1
You can fetch the URL using Regular Expression Extractor.
Add Regular Expression Extractor as a child of the HTTP Request sampler
Configure it as follows:
Field to check: Response Headers
Reference Name: JMeter Variable name of your choice, i.e. location
Regular Expression: Location: (.*)
Template: $1$
You will be able to access the extracted URL as ${location} or `${__V(location)}} where required.
See Using RegEx (Regular Expression Extractor) With JMeter article for more information on correlating dynamic values in JMeter test.