I am extracting several variables from a login response, using "Regular Expression Extractor" post processors. Most of them work when I reuse the variable, but one doesn't.
The regex extractor has the following settings:
Apply to: Main sample only
Field to check: Body
Name of variable: id_token
Regular Expression: <input type="hidden" name="id_token" value="([^"]+)"
Template:
Match No.:
Default Value:
Use empty default value: (unchecked)
Then in a later POST HTTP request I use the parameter:
Name, Value, URL Encode?, Content-Type, Include Equals
id_token, ${id_token_g1}, true, text/plain, true
When running the test in the "View Results Tree" listener the same POST request's POST data contains
&id_token=%24%7Bid_token_g1%7D
Instead of the value of id_token_g1.
Other variables in the same POST data are being completed correctly.
The Debug PostProcessor from the previous request contains
id_token_g1=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSIsImtpZCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSJ9.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.p8Wn1_SPf2wA1YFby4-ftXGfCtLQaHf6_XXaQJQFF_9SdOHDG2ICVKXs3Jx4UwwyQPDDnKl7rTQINRfb1sfNLnhGsuxr5BoDQaddyG24afT4-quwhl3XDb1jPIMEk-3l-6Rnhdr-UIzHXpMZaaYXE9rdCygI7wqT8REbL8nctQv9GTgh3O751NMjY4FYmj4QDBYrsp9sHJEx_sysMCHPscOm6vnIakKfuVGrVE2qBOQu2PfP3i29npDgNmJ2bmBniljnTMFI57w1vSq8mK2LIYMqoJyy6iudcxAlfRTGzEkezetmH3eIChQIipLUHHb-NmyImtOt-tdUUZXh_Rwq6r7YcwW6zfEPmVFunuHfxc5sB9fZEEzsZLoczB7UeWfBekYGMIK1AKp1BTkQA-kwcqbWIn66Hdjrmepnq3A6nD6pEB-I2tHMgbHIogwHqsGM61OBAGC2y7As3BdF-zepm1m9jISmRX7hiU8u6I1TOhwWIz8VKjlkdmqTQf1lY6I7yAq2Rwtu0zrQ--6el_lB7emX1YvD8whSFpQjI4YNpWJWRZ9ALXC7CudIgN5D4tgzSmEpQrcK-NasXWYf6RMfeDhYTYAbAChgwJ3KwWk6u_5OsX2LgQGbAg23BH9O_9rGg84DTgHM6IMlQG_loX2PnL8B5yqxydbJsz6CBdiLqKg
I have the same issue with session_state_g1
session_state_g1=XZkcgcg9i_FqlFIS-scHuHqMdm5jepyCSSFkF_S4Dx8.99d68c0a8e802c8767d22fb019bd34b5
But not with
access_token_g1=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSIsImtpZCI6IjVEbHphYTlvNEdveWFtWXdLNl9MUS16akFZTSJ9.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.Z2RTMN6NGwC1e8bJANmzvA9rUyo03vCpA3TTNylbdR8EpOvaktgHXHjWCFzxlaXeiL-24DlmVoq3qPHRx0u03nr8ZRD2fb9R_OeHxZ-gVr-2D1Ash1f_429J_4U7zjQfAQSOKHHamzTocSl0orLuvQdc9-oAydPCzpp82UbEDwsnQl_E52dK_LEB4eSiV3sB8rSpmZkmnhCmuSh9iUuMEOmA_zIs2cH_exFWjv5WXbZ8gKR-ATrPNuzoDpghMNZs-Of-dZwsaHfSJpV8C12DQ6wZq-w7m6v2szUpgJh1kHafKzM8Gm8-nMAAPV83hbdALFVvsF9tfcLjin3OEdytsfsfRLDEHLh4E-vo-LyAeHV-TKGuvX60-6tdQsSQXY-egVx1W7NiObmLbFzdRGAiV--tk8QHJ8Vf-nVAT00YXeQxEdMl1lqJFNuNOFxoNXL1ud_frUv1c2xwcnCH0hBpt2avWqN72Bj-15j6uube7IPIVp20NpT0M7FujohB-wQLfVJ8d7Ac_AVNScqasdijpTP5DzmsFybvXAu8n0MEcYHYF0-C8_d0EWW7GxpSEeeVFqKNk7JFgXEo1ta_5Yu7XDpwG7evzMFMw49cImZgcQlxrq3oDnl-qo6r9UXOfvS5QoDILU6dqYUpRSS1-Mz4_JbOmEs78v5ixcrm94PfNis
I have the same problem if I update the name of the HTTP Request sampler (it shows as ${id_token_g1} in the "View Results Tree" listener)
Any ideas what I'm doing wrong?
Make sure your setup is following JMeter Scoping Rules, i.e. you should have setup like:
Open Login Page
Regular Expression Extractor
Perform Login
Make sure you have this hidden input with name id_token in the response data. JMeter can be configured to store response data in .jtl results file, you need to add next 2 lines in user.properties file:
jmeter.save.saveservice.output_format=xml
jmeter.save.saveservice.response_data=true
Don't forget to restore the default configuration once you figure out the cause of the problem. See Results file configuration for more details.
Regular expressions is not the best choice for parsing HTML responses as they can be very fragile in case of markup change (changed order of HTML attributes or the input definition becomes multi-line). So consider switching to CSS/JQuery Extractor instead, the relevant configuration would be something like:
Reference Name: anything meaningful, you can keep id_token
CSS/JQuery Expression: input[id=name]
Attribute: value
In 2nd POST request you can refer the extracted value as ${id_token}
1.Follow Jmeter Scoping Rules.
2.To your regular expression you can give template as $1$ and use ${id_token} instead of ${id_token_g1}.
For more information on regular expression extractors
follow this link.
You can use this website to test your regular expressions.
Let me know if it helps..
Related
In my first request I am able to extract the value using Regular Expression Extractor which is clearly visible into the debug sampler. The value is extracted by setting the following options in Regular Expression Extractor:-
Name of Created Variable:- instanceUID
Regular Expression:- "InstanceUid":"(.*?)"
Template:-$1$
Match No:-1
Default Value:- (Blank)
The value that I want to pass in the next POST request is visible as:-
instanceUID_g1=2ab5dfb8-a217-4ff2-9025-523565b7b7ad
And the body for the next HTTP POST request is set like this:-
${"iInfo":{"InstanceUid":"${instanceUID_g1}","Registry":"${Registry}"}}
When this request seen in detail inside View Results Tree looks like:-
${"iInfo":{"InstanceUid":"${instanceUID_g1}","Registry":"AAX"}}
As seen the value of ${instanceUID_g1} did not get substituted in the POST body as was for variable ${Registry} which was taken from CSV config.
Being new to Jmeter can anyone suggest what did I miss?
Most probably your Regular Expression Extractor placement is not very correct, be informed about JMeter Scoping Rules concept
If you place Regular Expression Extractor as a child of the request - it will be applied to this request only
If you place Regular Expression Extractor at the same level as several requests - it will be applied to all of them
in the latter case it will be applied 1st to 1st sampler, then to Debug Sampler, then to 3rd sampler so on 2nd step it will be overwritten, most probably that's your problem
Also it appears that you're getting the data from JSON so it makes more sense to use JSON Extractor or JMESPath Extractor
I have recorded script using BlazeMeter plugin and I want to the use access token which I receive in successful login request, in another request. My Test plan looks like as below
Thread Group : [A]
|- HTTP Sampler - Login Page
|-Regular Expression Extractor [getToken]
|-HTTP Sampler - Other Page
|-Beanshell PreProcessor[Set Header in Authorization]
Regular Expression Extractor parameters and values like below :
Variable Name : token
Regular Expression : {“access_token”:”(.+?)"
Template : $1$
Match No. : 0
Beanshell PreProcessor script like below
import org.apache.jmeter.protocol.http.control.Header;
log.info("Start");
sampler.getHeaderManager().add(new Header("Authorization","Bearer"+vars.get("token")));
log.info(vars.get("token"));
Most probably your Regular Expression Extractor fails as your quotation marks look utterly suspicious. You can double check if the token variable really has the anticipated value using Debug Sampler and View Results Tree listener combination. Also check out jmeter.log file for any suspicious entries, if your Beanshell script fails - the cause will be printed there.
The response data of the Login Page seems to be JSON therefore it makes sense to use the JSON Extractor instead of the Regular Expression Extractor. It allows using JSON Path language in order to extract "interesting" bits of data from the responses. In your case the relevant JSON Path expression would be $.access_token
Since JMeter 3.1 it's recommended to use JSR223 Test Elements and Groovy language for scripting so consider migrating to the JSR223 PreProcessor and Groovy language (you can re-use the same code)
You don't even need the scripting, you can add Authorization header (as well as any other header) using HTTP Header Manager
Could you add debug sampler and try first to confirm your regular expression extractor working as expected? It should provide you the required value of token.
If your token has the required value, I will suggest you to add HTTP Header Manager config element by right clicking on HTTP sampler
HTTP Request => Add => Config Element => HTTP Header Manager
In this config element, you can visually add the Headers as below:
Please Note That:- You have not provided any space/hyphen(-) or between keyword Bear and token.
Refer this link for details :-
https://stackoverflow.com/a/24550552/1115090
My task is to make a request and save some data from the headers in a variable and use it later in another requests.
So I've added an http request and added an regular expression extractor. Here is my setup:
And then I've created another request and I'm using the LocationToken variable, but there the variable has the default value (dd). here is the response:
So, as you can see, the pattern patches on the headers. So what have I done wrong?
In Regular Expression Extractor, under Apply to section, you should select Main sampler and sub-samplers option but not JMeter Variable.
Regular Expression Extractor saves the value into the variable which we specified in Reference Name field.
in the question,
Reference Name: LocationToken
in later request, you refer the value as follows:
${LocationToken}
In my application while executing the first request one unique key is generated which key is required for Next all the request. let me how to automate such scenario in Jmeter.
The process should look as follows:
Add Post Processor to the first request
Configure it to extract the required value and store it into a JMeter Variable
Use JMeter Variable from step 2 in your next request.
Depending on response data type you have the following choices:
Regular Expression Extractor - for text
CSS/JQuery Extractor - for HTML
XPath Extractor - for XML and XHTML
JSON Path Extractor - for JSON
It is also possible to extract data from files i.e. if response is in PDF format, but it's a little bit tricky
Example configuration to store the whole response:
Reference Name: any suitable variable name, i.e. response
Regular Expression: (?s)(^.*)
Template: $1$
You can refer the extracted value as ${response} where required. You can also amend the regular expression to extract response part instead of the whole response. JMeter uses Perl5-compatible regular expressions, see Regular Expressions User Manual Chapter for details
You can use regular expression extractor to extract the key from the response of your first request and use the extracted key for subsequent requests. To achieve this:
Right click on the first request and add post processor: Regular Expression Extractor.
Create your regular expression and provide values in other required fields. Please refer to JMeter component reference http://jmeter.apache.org/usermanual/component_reference.html#Regular_Expression_Extractor
Extracted value will be saved in the variable given as reference name
Use this variable in subsequent requests
Here is an example test plan with results.
Can somebody please explain me how can I use JMeter for Feature testing?
I'm able to create multiple HTTP requests within a Testplan. But I need know the way to capture the previous API response and pass one of the response data to the next API request.
Eg:
1.Create Account.
Request- POST: /account
Response: ID: "Value"
Read account
Request- GET: /account/
JMeter is really more of a load testing tool, and best used as such. Capturing data from responses is possible using the Regular Expression Extractor, which can store extracted values in variables for use in a subsequent request. It is a bit of a pain in the ass to use, though.
On your request, add a Regular Expression Extractor:
Field to check: body
Reference name: EXAMPLE
Regular Expression: \[.*\] #your regex here, stuff in square brackets as example
Match No.: 1
In a subsequent request, you can then use the variables defined by the extractor, e.g. ${EXAMPLE_g0} for the entire match, or ${EXAMPLE_g1} for group 1, etc.