Related
I wonder if there is a way for me to SCP the file from remote2 host directly from my local machine by going through a remote1 host.
The networks only allow connections to remote2 host from remote1 host. Also, neither remote1 host nor remote2 host can scp to my local machine.
Is there something like:
scp user1#remote1:user2#remote2:file .
First window: ssh remote1, then scp remot2:file ..
Second shell: scp remote1:file .
First window: rm file; logout
I could write a script to do all these steps, but if there is a direct way, I would rather use it.
Thanks.
EDIT: I am thinking something like opening SSH tunnels but i'm confused on what value to put where.
At the moment, to access remote1, i have the following in $HOME/.ssh/config on my local machine.
Host remote1
User user1
Hostname localhost
Port 45678
Once on remote1, to access remote2, it's the standard local DNS and port 22. What should I put on remote1 and/or change on localhost?
I don't know of any way to copy the file directly in one single command, but if you can concede to running an SSH instance in the background to just keep a port forwarding tunnel open, then you could copy the file in one command.
Like this:
# First, open the tunnel
ssh -L 1234:remote2:22 -p 45678 user1#remote1
# Then, use the tunnel to copy the file directly from remote2
scp -P 1234 user2#localhost:file .
Note that you connect as user2#localhost in the actual scp command, because it is on port 1234 on localhost that the first ssh instance is listening to forward connections to remote2. Note also that you don't need to run the first command for every subsequent file copy; you can simply leave it running.
Double ssh
Even in your complex case, you can handle file transfer using a single command line, simply with ssh ;-)
And this is useful if remote1 cannot connect to localhost:
ssh user1#remote1 'ssh user2#remote2 "cat file"' > file
tar
But you loose file properties (ownership, permissions...).
However, tar is your friend to keep these file properties:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar c file"' | tar x
You can also compress to reduce network bandwidth:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar cj file"' | tar xj
And tar also allows you transferring a recursive directory through basic ssh:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar cj ."' | tar xj
ionice
If the file is huge and you do not want to disturb other important network applications, you may miss network throughput limitation provided by scp and rsync tools (e.g. scp -l 1024 user#remote:file does not use more than 1 Mbits/second).
But, a workaround is using ionice to keep a single command line:
ionice -c2 -n7 ssh u1#remote1 'ionice -c2 -n7 ssh u2#remote2 "cat file"' > file
Note: ionice may not be available on old distributions.
This will do the trick:
scp -o 'Host remote2' -o 'ProxyCommand ssh user#remote1 nc %h %p' \
user#remote2:path/to/file .
To SCP the file from the host remote2 directly, add the two options (Host and ProxyCommand) to your ~/.ssh/config file (see also this answer on superuser). Then you can run:
scp user#remote2:path/to/file .
from your local machine without having to think about remote1.
With openssh version 7.3 and up it is easy. Use ProxyJump option in the config file.
# Add to ~/.ssh/config
Host bastion
Hostname bastion.client.com
User userForBastion
IdentityFile ~/.ssh/bastion.pem
Host appMachine
Hostname appMachine.internal.com
User bastion
ProxyJump bastion # openssh 7.3 version new feature ProxyJump
IdentityFile ~/.ssh/appMachine.pem. #no need to copy pem file to bastion host
Commands to run to login or copy
ssh appMachine # no need to specify any tunnel.
scp helloWorld.txt appMachine:. # copy without intermediate jumphost/bastion host copy.**
ofcourse you can specify bastion Jump host using option "-J" to ssh command, if not configured in config file.
Note scp does not seems to support "-J" flag as of now. (i could not find in man pages. However above scp works with config file setting)
There is a new option in scp that add recently for exactly this same job that is very convenient, it is -3.
TL;DR For the current host that has authentication already set up in ssh config files, just do:
scp -3 remote1:file remote2:file
Your scp must be from recent versions.
All other mentioned technique requires you to set up authentication from remote1 to remote2 or vice versa, which not always is a good idea.
Argument -3 means you want to move files from two remote hosts by using current host as intermediary, and this host actually does the authentication to both remote hosts, so they don't have to have access to each other.
You just have to setup authentication in ssh config files, which is fairly easy and well documented, and then just run the command in TL;DR
The source for this answer is https://superuser.com/a/686527/713762
This configuration works nice for me:
Host jump
User username
Hostname jumphost.yourorg.intranet
Host production
User username
Hostname production.yourorg.intranet
ProxyCommand ssh -q -W %h:%p jump
Then the command
scp myfile production:~
Copies myfile to production machine.
a simpler way:
scp -o 'ProxyJump your.jump.host' /local/dir/myfile.txt remote.internal.host:/remote/dir
How do I copy a folder from remote to local host using scp?
I use ssh to log in to my server.
Then, I would like to copy the remote folder foo to local /home/user/Desktop.
How do I achieve this?
scp -r user#your.server.example.com:/path/to/foo /home/user/Desktop/
By not including the trailing '/' at the end of foo, you will copy the directory itself (including contents), rather than only the contents of the directory.
From man scp (See online manual)
-r Recursively copy entire directories
To use full power of scp you need to go through next steps:
Public key authorisation
Create SSH aliases
Then, for example if you have this ~/.ssh/config:
Host test
User testuser
HostName test-site.example
Port 22022
Host prod
User produser
HostName production-site.example
Port 22022
you'll save yourself from password entry and simplify scp syntax like this:
scp -r prod:/path/foo /home/user/Desktop # copy to local
scp -r prod:/path/foo test:/tmp # copy from remote prod to remote test
More over, you will be able to use remote path-completion:
scp test:/var/log/ # press tab twice
Display all 151 possibilities? (y or n)
For enabling remote bash-completion you need to have bash-shell on both <source> and <target> hosts, and properly working bash-completion. For more information see related questions:
How to enable autocompletion for remote paths when using scp?
SCP filename tab completion
To copy all from Local Location to Remote Location (Upload)
scp -r /path/from/local username#hostname:/path/to/remote
To copy all from Remote Location to Local Location (Download)
scp -r username#hostname:/path/from/remote /path/to/local
Custom Port where xxxx is custom port number
scp -r -P xxxx username#hostname:/path/from/remote /path/to/local
Copy on current directory from Remote to Local
scp -r username#hostname:/path/from/remote .
Help:
-r Recursively copy all directories and files
Always use full location from /, Get full location/path by pwd
scp will replace all existing files
hostname will be hostname or IP address
if custom port is needed (besides port 22) use -P PortNumber
. (dot) - it means current working directory, So download/copy from server and paste here only.
Note: Sometimes the custom port will not work due to the port not being allowed in the firewall, so make sure that custom port is allowed in the firewall for incoming and outgoing connection
What I always use is:
scp -r username#IP:/path/to/server/source/folder/ .
. (dot): it means current folder. so copy from server and paste here only.
IP: can be an IP address like 125.55.41.311 or it can be host like ns1.mysite.example.
Better to first compress catalog on remote server:
tar czfP backup.tar.gz /path/to/catalog
Secondly, download from remote:
scp user#your.server.example.com:/path/to/backup.tar.gz .
At the end, extract the files:
tar -xzvf backup.tar.gz
Typical scenario,
scp -r -P port username#ip:/path-to-folder .
explained with an sample,
scp -r -P 27000 abc#10.70.12.12:/tmp/hotel_dump .
where,
port = 27000
username = "abc" , remote server username
path-to-folder = tmp/hotel_dump
. = current local directory
And if you have one hell of a files to download from the remote location and if you don't much care about security, try changing the scp default encryption (Triple-DES) to something like 'blowfish'.
This will reduce file copying time drastically.
scp -c blowfish -r user#your.server.example.com:/path/to/foo /home/user/Desktop/
Go to Files on your unity toolbar
Press Ctrl + l and write here_goes_your_user_name#192.168.10.123
The 192.168.1.103 is the host that you want to connect.
The here one example
In case you run into "Too many authentication failures", specify the exact SSH key you have added to your severs ssh server:
scp -r -i /path/to/local/key user#remote.tld:/path/to/folder /your/local/target/dir
The question was how to copy a folder from remote to local with scp command.
$ scp -r userRemote#remoteIp:/path/remoteDir /path/localDir
But here is the better way for do it with sftp - SSH File Transfer Protocol (also Secure File Transfer Protocol, or SFTP) is a network protocol that provides file access, file transfer, and file management over any reliable data stream.(wikipedia).
$ sftp user_remote#remote_ip
sftp> cd /path/to/remoteDir
sftp> get -r remoteDir
Fetching /path/to/remoteDir to localDir 100% 398 0.4KB/s 00:00
For help about sftp command just type help or ?.
I don't know why but I was had to use local folder before source server directive . to make it work
scp -r . root#888.888.888.888:/usr/share/nginx/www/example.org/
For Windows OS, we used this command.
pscp -r -P 22 hostname#IP:/path/to/Downloads ./
The premise of the question is incorrect. The idea is, once logged into ssh, how to move files from the logged-in machine back to the client that is logged in. However, scp is not aware of nor can it use the ssh connection. It is making its own connections. So the simple solution is create a new terminal window on the local workstation, and run scp that transfers files from the remote server to local machine. E.g., scp -i key user#remote:/remote-dir/remote-file /local-dir/local-file
In my script - i create a sftp connection.
I read some directory value from user earlier and once the sftp connection is established, i try to cd to that dir which i got from the user.
But its not working, probably bec the prompt goes inside the server to which the SFTP connection was established.
In this case how to make it work ?
I also faced this problem and was able to find the solution. The solution is right there in the man page of sftp. In the man page, you will find where it is written the format of using sftp like this:
sftp [options] [user#]host[:dir[/]]
Actually, two formats are given there but this is the one I wanted to use and it worked.
So, what do you do? You simply supply the username#host as seen there, then, without any space followed by : and the path you want to change to in the client/remote server in your script and that's all. Here is a practical example:
sftp user#host:/path/
If your script does, as you state somewhere in this page,
sftp $user#$host cd $directory
and then tries to do something else, like:
sftp $user#$host FOO
That command FOO will not be executed in the same directory $directory since you're executing a new command, which will create a new connection to the SFTP server.
What you can do is use the "batchfile" option of sftp, i.e. construct a file which contains all the commands you'd like sftp to do over one connection, for example:
$ cat commands.txt
cd foo/bar
put foo.tgz
lcd /tmp/
get foo.tgz
Then, you will be able to tell sftp to execute those commands in one connection, by executing:
sftp -b commands.txt $user#$host
So, I propose your solution to be:
With user's input, create a temporary text file which contains all the commands to be executed over one SFTP connection, then
Execute sftp using that temporary text file as "batch file"
Your script would do something like:
echo "Directory in which to go:"
read directory
temp=$( mktemp /tmp/FOOXXX )
echo "" > $temp
echo "cd $directory" >> $temp
# other commands
sftp -b $temp $user#$host
rm $temp
If you are trying to change the directory of the machine, try lcd
In what way is it not working? To change directories on the remote server, you use the "cd" command. To change directories on the local server, you use the "lcd" command. Read "man sftp".
I often have to login to one of several servers and go to one of several directories on those machines. Currently I do something of this sort:
localhost ~]$ ssh somehost
Welcome to somehost!
somehost ~]$ cd /some/directory/somewhere/named/Foo
somehost Foo]$
I have scripts that can determine which host and which directory I need to get into but I cannot figure out a way to do this:
localhost ~]$ go_to_dir Foo
Welcome to somehost!
somehost Foo]$
Is there an easy, clever or any way to do this?
You can do the following:
ssh -t xxx.xxx.xxx.xxx "cd /directory_wanted ; bash --login"
This way, you will get a login shell right on the directory_wanted.
Explanation
-t Force pseudo-terminal allocation. This can be used to execute arbitrary screen-based programs on a remote machine, which can be very useful, e.g. when implementing menu services.
Multiple -t options force tty allocation, even if ssh has no local tty.
If you don't use -t then no prompt will appear.
If you don't add ; bash then the connection will get closed and return control to your local machine
If you don't add bash --login then it will not use your configs because its not a login shell
You could add
cd /some/directory/somewhere/named/Foo
to your .bashrc file (or .profile or whatever you call it) at the other host. That way, no matter what you do or where you ssh from, whenever you log onto that server, it will cd to the proper directory for you, and all you have to do is use ssh like normal.
Of curse, rogeriopvl's solution works too, but it's a tad bit more verbose, and you have to remember to do it every time (unless you make an alias) so it seems a bit less "fun".
My preferred approach is using the SSH config file (described below), but there are a few possible solutions depending on your usages.
Command Line Arguments
I think the best answer for this approach is christianbundy's reply to the accepted answer:
ssh -t example.com "cd /foo/bar; exec \$SHELL -l"
Using double quotes will allow you to use variables from your local machine, unless they are escaped (as $SHELL is here). Alternatively, you can use single quotes, and all of the variables you use will be the ones from the target machine:
ssh -t example.com 'cd /foo/bar; exec $SHELL -l'
Bash Function
You can simplify the command by wrapping it in a bash function. Let's say you just want to type this:
sshcd example.com /foo/bar
You can make this work by adding this to your ~/.bashrc:
sshcd () { ssh -t "$1" "cd \"$2\"; exec \$SHELL -l"; }
If you are using a variable that exists on the remote machine for the directory, be sure to escape it or put it in single quotes. For example, this will cd to the directory that is stored in the JBOSS_HOME variable on the remote machine:
sshcd example.com \$JBOSS_HOME
SSH Config File
If you'd like to see this behavior all the time for specific (or any) hosts with the normal ssh command without having to use extra command line arguments, you can set the RequestTTY and RemoteCommand options in your ssh config file.
For example, I'd like to type only this command:
ssh qaapps18
but want it to always behave like this command:
ssh -t qaapps18 'cd $JBOSS_HOME; exec $SHELL'
So I added this to my ~/.ssh/config file:
Host *apps*
RequestTTY yes
RemoteCommand cd $JBOSS_HOME; exec $SHELL
Now this rule applies to any host with "apps" in its hostname.
For more information, see http://man7.org/linux/man-pages/man5/ssh_config.5.html
I've created a tool to SSH and CD into a server consecutively – aptly named sshcd. For the example you've given, you'd simply use:
sshcd somehost:/some/directory/somewhere/named/Foo
Let me know if you have any questions or problems!
Based on additions to #rogeriopvl's answer, I suggest the following:
ssh -t xxx.xxx.xxx.xxx "cd /directory_wanted && bash"
Chaining commands by && will make the next command run only when the previous one was successful (as opposed to using ;, which executes commands sequentially). This is particularly useful when needing to cd to a directory performing the command.
Imagine doing the following:
/home/me$ cd /usr/share/teminal; rm -R *
The directory teminal doesn't exist, which causes you to stay in the home directory and remove all the files in there with the following command.
If you use &&:
/home/me$ cd /usr/share/teminal && rm -R *
The command will fail after not finding the directory.
In my very specific case, I just wanted to execute a command in a remote host, inside a specific directory from a Jenkins slave machine:
ssh myuser#mydomain
cd /home/myuser/somedir
./commandThatMustBeRunInside_somedir
exit
But my machine couldn't perform the ssh (it couldn't allocate a pseudo-tty I suppose) and kept me giving the following error:
Pseudo-terminal will not be allocated because stdin is not a terminal
I could get around this issue passing "cd to dir + my command" as a parameter of the ssh command (to not have to allocate a Pseudo-terminal) and by passing the option -T to explicitly tell to the ssh command that I didn't need pseudo-terminal allocation.
ssh -T myuser#mydomain "cd /home/myuser/somedir; ./commandThatMustBeRunInside_somedir"
I use the environment variable CDPATH
going one step further with the -t idea. I keep a set of scripts calling the one below to go to specific places in my frequently visited hosts. I keep them all in ~/bin and keep that directory in my path.
#!/bin/bash
# does ssh session switching to particular directory
# $1, hostname from config file
# $2, directory to move to after login
# can save this as say 'con' then
# make another script calling this one, e.g.
# con myhost repos/i2c
ssh -t $1 "cd $2; exec \$SHELL --login"
My answer may differ from what you really want, but I write here as may be useful for some people. In my solution you have to enter into the directory once and then every new ssh session goes to the same dir (after the first logout).
How to ssh to the same directory you have been in your last login.
(I assume you use bash on the remote node.)
Add this line to your ~/.bash_logout on the remote node(!):
echo $PWD > ~/.bash_lastpwd
and these lines to the ~/.bashrc file (still on the remote node!)
if [ -f ~/.bash_lastpwd ]; then
cd $(cat ~/.bash_lastpwd)
fi
This way you save your current path on every logout and .bashrc put you into that directory after login.
ps: You can tweak it further like using the SSH_CLIENT variable to decide to go into that directory or not, so you can differentiate between local logins and ssh or even between different ssh clients.
Another way of going to directly after logging in is create "Alias". When you login into your system just type that alias and you will be in that directory.
Example : Alias = myfolder '/var/www/Folder'
After you log in to your system type that alias (this works from any part of the system)
this command if not in bashrc will work for current session. So you can also add this alias to bashrc to use that in future
$ myfolder => takes you to that folder
I know this has been answered ages ago but I found the question while trying to incorporate an ssh login in a bash script and once logged in run a few commands and log back out and continue with the bash script. The simplest way I found which hasnt been mentioned elsewhere because it is so trivial is to do this.
#!/bin/bash
sshpass -p "password" ssh user#server 'cd /path/to/dir;somecommand;someothercommand;exit;'
Connect With User
In case if you don't know this, you can use this to connect by specifying both user and host
ssh -t <user>#<Host domain / IP> "cd /path/to/directory; bash --login"
Example: ssh -t admin#test.com "cd public_html; bash --login"
You can also append the commands to be executed on every login by appending it in the double quotes with a ; before each command
Unfortunately, the suggested solution (of #rogeriopvl) doesn't work when you use multiple hops, so I found another one.
On remote machine add into ~/.bashrc the following:
[ "x$CDTO" != "x" ] && cd $CDTO
This allows you to specify the desired target directory on command line in this way:
ssh -t host1 ssh -t host2 "CDTO=/desired_directory exec bash --login"
Sure, this way can be used for a single hop too.
This solution can be combined with the usefull tip of #redseven for greater flexibilty (if no $CDTO, go to saved directory, if exists).
SSH itself provides a means of communication, it does not know anything about directories. Since you can specify which remote command to execute (this is - by default - your shell), I'd start there.
simply modify your home with the command:
usermod -d /newhome username
I have to run a local shell script (windows/Linux) on a remote machine.
I have SSH configured on both machine A and B. My script is on machine A which will run some of my code on a remote machine, machine B.
The local and remote computers can be either Windows or Unix based system.
Is there a way to run do this using plink/ssh?
If Machine A is a Windows box, you can use Plink (part of PuTTY) with the -m parameter, and it will execute the local script on the remote server.
plink root#MachineB -m local_script.sh
If Machine A is a Unix-based system, you can use:
ssh root#MachineB 'bash -s' < local_script.sh
You shouldn't have to copy the script to the remote server to run it.
This is an old question, and Jason's answer works fine, but I would like to add this:
ssh user#host <<'ENDSSH'
#commands to run on remote host
ENDSSH
This can also be used with su and commands which require user input. (note the ' escaped heredoc)
Since this answer keeps getting bits of traffic, I would add even more info to this wonderful use of heredoc:
You can nest commands with this syntax, and that's the only way nesting seems to work (in a sane way)
ssh user#host <<'ENDSSH'
#commands to run on remote host
ssh user#host2 <<'END2'
# Another bunch of commands on another host
wall <<'ENDWALL'
Error: Out of cheese
ENDWALL
ftp ftp.example.com <<'ENDFTP'
test
test
ls
ENDFTP
END2
ENDSSH
You can actually have a conversation with some services like telnet, ftp, etc. But remember that heredoc just sends the stdin as text, it doesn't wait for response between lines
I just found out that you can indent the insides with tabs if you use <<-END!
ssh user#host <<-'ENDSSH'
#commands to run on remote host
ssh user#host2 <<-'END2'
# Another bunch of commands on another host
wall <<-'ENDWALL'
Error: Out of cheese
ENDWALL
ftp ftp.example.com <<-'ENDFTP'
test
test
ls
ENDFTP
END2
ENDSSH
(I think this should work)
Also see
http://tldp.org/LDP/abs/html/here-docs.html
Also, don't forget to escape variables if you want to pick them up from the destination host.
This has caught me out in the past.
For example:
user#host> ssh user2#host2 "echo \$HOME"
prints out /home/user2
while
user#host> ssh user2#host2 "echo $HOME"
prints out /home/user
Another example:
user#host> ssh user2#host2 "echo hello world | awk '{print \$1}'"
prints out "hello" correctly.
This is an extension to YarekT's answer to combine inline remote commands with passing ENV variables from the local machine to the remote host so you can parameterize your scripts on the remote side:
ssh user#host ARG1=$ARG1 ARG2=$ARG2 'bash -s' <<'ENDSSH'
# commands to run on remote host
echo $ARG1 $ARG2
ENDSSH
I found this exceptionally helpful by keeping it all in one script so it's very readable and maintainable.
Why this works. ssh supports the following syntax:
ssh user#host remote_command
In bash we can specify environment variables to define prior to running a command on a single line like so:
ENV_VAR_1='value1' ENV_VAR_2='value2' bash -c 'echo $ENV_VAR_1 $ENV_VAR_2'
That makes it easy to define variables prior to running a command. In this case echo is our command we're running. Everything before echo defines environment variables.
So we combine those two features and YarekT's answer to get:
ssh user#host ARG1=$ARG1 ARG2=$ARG2 'bash -s' <<'ENDSSH'...
In this case we are setting ARG1 and ARG2 to local values. Sending everything after user#host as the remote_command. When the remote machine executes the command ARG1 and ARG2 are set the local values, thanks to local command line evaluation, which defines environment variables on the remote server, then executes the bash -s command using those variables. Voila.
<hostA_shell_prompt>$ ssh user#hostB "ls -la"
That will prompt you for password, unless you have copied your hostA user's public key to the authorized_keys file on the home of user .ssh's directory. That will allow for passwordless authentication (if accepted as an auth method on the ssh server's configuration)
I've started using Fabric for more sophisticated operations. Fabric requires Python and a couple of other dependencies, but only on the client machine. The server need only be a ssh server. I find this tool to be much more powerful than shell scripts handed off to SSH, and well worth the trouble of getting set up (particularly if you enjoy programming in Python). Fabric handles running scripts on multiple hosts (or hosts of certain roles), helps facilitate idempotent operations (such as adding a line to a config script, but not if it's already there), and allows construction of more complex logic (such as the Python language can provide).
cat ./script.sh | ssh <user>#<host>
chmod +x script.sh
ssh -i key-file root#111.222.3.444 < ./script.sh
Try running ssh user#remote sh ./script.unx.
Assuming you mean you want to do this automatically from a "local" machine, without manually logging into the "remote" machine, you should look into a TCL extension known as Expect, it is designed precisely for this sort of situation. I've also provided a link to a script for logging-in/interacting via SSH.
https://www.nist.gov/services-resources/software/expect
http://bash.cyberciti.biz/security/expect-ssh-login-script/
ssh user#hostname ". ~/.bashrc;/cd path-to-file/;. filename.sh"
highly recommended to source the environment file(.bashrc/.bashprofile/.profile). before running something in remote host because target and source hosts environment variables may be deffer.
I use this one to run a shell script on a remote machine (tested on /bin/bash):
ssh deploy#host . /home/deploy/path/to/script.sh
if you wanna execute command like this
temp=`ls -a`
echo $temp
command in `` will cause errors.
below command will solve this problem
ssh user#host '''
temp=`ls -a`
echo $temp
'''
If the script is short and is meant to be embedded inside your script and you are running under bash shell and also bash shell is available on the remote side, you may use declare to transfer local context to remote. Define variables and functions containing the state that will be transferred to the remote. Define a function that will be executed on the remote side. Then inside a here document read by bash -s you can use declare -p to transfer the variable values and use declare -f to transfer function definitions to the remote.
Because declare takes care of the quoting and will be parsed by the remote bash, the variables are properly quoted and functions are properly transferred. You may just write the script locally, usually I do one long function with the work I need to do on the remote side. The context has to be hand-picked, but the following method is "good enough" for any short scripts and is safe - should properly handle all corner cases.
somevar="spaces or other special characters"
somevar2="!##$%^"
another_func() {
mkdir -p "$1"
}
work() {
another_func "$somevar"
touch "$somevar"/"$somevar2"
}
ssh user#server 'bash -s' <<EOT
$(declare -p somevar somevar2) # transfer variables values
$(declare -f work another_func) # transfer function definitions
work # call the function
EOT
The answer here (https://stackoverflow.com/a/2732991/4752883) works great if
you're trying to run a script on a remote linux machine using plink or ssh.
It will work if the script has multiple lines on linux.
**However, if you are trying to run a batch script located on a local
linux/windows machine and your remote machine is Windows, and it consists
of multiple lines using **
plink root#MachineB -m local_script.bat
wont work.
Only the first line of the script will be executed. This is probably a
limitation of plink.
Solution 1:
To run a multiline batch script (especially if it's relatively simple,
consisting of a few lines):
If your original batch script is as follows
cd C:\Users\ipython_user\Desktop
python filename.py
you can combine the lines together using the "&&" separator as follows in your
local_script.bat file:
https://stackoverflow.com/a/8055390/4752883:
cd C:\Users\ipython_user\Desktop && python filename.py
After this change, you can then run the script as pointed out here by
#JasonR.Coombs: https://stackoverflow.com/a/2732991/4752883 with:
`plink root#MachineB -m local_script.bat`
Solution 2:
If your batch script is relatively complicated, it may be better to use a batch
script which encapsulates the plink command as well as follows as pointed out
here by #Martin https://stackoverflow.com/a/32196999/4752883:
rem Open tunnel in the background
start plink.exe -ssh [username]#[hostname] -L 3307:127.0.0.1:3306 -i "[SSH
key]" -N
rem Wait a second to let Plink establish the tunnel
timeout /t 1
rem Run the task using the tunnel
"C:\Program Files\R\R-3.2.1\bin\x64\R.exe" CMD BATCH qidash.R
rem Kill the tunnel
taskkill /im plink.exe
This bash script does ssh into a target remote machine, and run some command in the remote machine, do not forget to install expect before running it (on mac brew install expect )
#!/usr/bin/expect
set username "enterusenamehere"
set password "enterpasswordhere"
set hosts "enteripaddressofhosthere"
spawn ssh $username#$hosts
expect "$username#$hosts's password:"
send -- "$password\n"
expect "$"
send -- "somecommand on target remote machine here\n"
sleep 5
expect "$"
send -- "exit\n"
You can use runoverssh:
sudo apt install runoverssh
runoverssh -s localscript.sh user host1 host2 host3...
-s runs a local script remotely
Useful flags:
-g use a global password for all hosts (single password prompt)
-n use SSH instead of sshpass, useful for public-key authentication
If it's one script it's fine with the above solution.
I would set up Ansible to do the Job. It works in the same way (Ansible uses ssh to execute the scripts on the remote machine for both Unix or Windows).
It will be more structured and maintainable.
It is unclear if the local script uses locally set variables, functions, or aliases.
If it does this should work:
myscript.sh:
#!/bin/bash
myalias $myvar
myfunction $myvar
It uses $myvar, myfunction, and myalias. Let us assume they is set locally and not on the remote machine.
Make a bash function that contains the script:
eval "myfun() { `cat myscript.sh`; }"
Set variable, function, and alias:
myvar=works
alias myalias='echo This alias'
myfunction() { echo This function "$#"; }
And "export" myfun, myfunction, myvar, and myalias to server using env_parallel from GNU Parallel:
env_parallel -S server -N0 --nonall myfun ::: dummy
Extending answer from #cglotr. In order to write inline command use printf, it useful for simple command and it support multiline using char escaping '\n'
example :
printf "cd /to/path/your/remote/machine/log \n tail -n 100 Server.log" | ssh <user>#<host> 'bash -s'
See don't forget to add bash -s
I created a solution that works better for me by combining the use of a heredoc from Yarek T's answer with the piped cat method from cglotr's answer along with some other tricks for non-interactive login (using sshpass), using variables from the local and remote host in the script, and enabling sudo commands. The code is longer just because it includes some additional tricks that are likely desired, but the original questioner didn't ask for them.
The problem I have with Yarek's answer is that all the warnings and commands in the heredoc print to the screen. The problem I have with cglotr's answer is that is requires a script file and a complex command with additional interaction to execute the script. With my solution, I write a script that does everything by simply calling the script with the remote host IP address as the first argument like this:
./MYSCRIPT REMOTE_IP_ADDRESS
The script to be run on the remote host is saved to a variable within the script on the local host using a heredoc so that you don't need to do any quote escaping. Then, the variable containing the script is echo piped to sshpass. Be sure to indent the commands with tabs and not spaces (you'll get spaces instead of tabs when you copy the code). Here is an example of the remote script within the local script.
!/bin/bash
# Input argument 1 should be the target host IP address (required)
RX_IP="/(\b25[0-5]|\b2[0-4][0-9]|\b[01]?[0-9][0-9]?)(\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)){3}/"
IS_IP=$(echo $1 | sed -nr "${RX_IP}p" | wc -l)
if (( $IS_IP )); then
USERNAME=remoteuser
HOSTNAME=$1
# Export the SSH password to environment variable for sshpass and sudo.
# The space before the command prevents saving the command to history.
export SSHPASS=mypassword;
while read -r -d '' SCRIPT <<-EOS
# Enable sudo commands with the following command.
# The space before echo prevents saving the command to history.
echo $SSHPASS | sudo -Sv
# Do stuff here. Escape variables to be be accessed on the remote host.
# For example, escape print variable in an awk command:
# This command lists all USB block device partitions.
ls -l /dev /dev/mapper | awk '/^b/ && /sd[a-z][1-9]/ {print \$10}'
exit
EOS
echo "$SCRIPT" | sshpass -e ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null ${USERNAME}#${HOSTNAME} &>/dev/null
echo 'DONE'
else
echo "Missing IP address of target host."
echo "Usage: ./SCRIPT_NAME IP_ADDRESS
fi
You need to install sshpass on the local host like this (for Debian based distros).
sudo apt install sshpass
There is another approach ,you can copy your script in your host with scp command then execute it easily .
First, copy the script over to Machine B using scp
[user#machineA]$ scp /path/to/script user#machineB:/home/user/path
Then, just run the script
[user#machineA]$ ssh user#machineB "/home/user/path/script"
This will work if you have given executable permission to the script.