I have integrated FindBugs plugin to fail the build in case of bugs.
Then using that brilliant answer I configured FindBugs to generate html reports (xml version is barely readable).
The problem is that I have failOnError property set to true, which means that the build would fail in case of bug.
.....
<configuration>
.....
<failOnError>true</failOnError>
</configuration>
And then no html report would be generated.
I read about Maven build lifecycle and there is no such thing as "Execute on fail" (like finally block in Java). So, are there any possible workarounds?
And shouldn't it be out-of the box Maven feature?
Special thanks to #SpaceTrucker for workaround suggestion.
Here is the configuration I ended up with:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>findbugs-maven-plugin</artifactId>
<version>3.0.4</version>
<configuration>
<effort>Max</effort>
<threshold>Low</threshold>
<findbugsXmlOutputDirectory>${project.build.directory}/findbugs</findbugsXmlOutputDirectory>
</configuration>
<executions>
<execution>
<id>noFailOnError</id>
<phase>verify</phase>
<goals>
<goal>check</goal>
</goals>
<configuration>
<failOnError>false</failOnError>
</configuration>
</execution>
<execution>
<id>failOnError</id>
<phase>install</phase>
<goals>
<goal>check</goal>
</goals>
<configuration>
<failOnError>true</failOnError>
</configuration>
</execution>
</executions>
</plugin>
The solution is to use different configurations in verify and install phases.
Note, that according to that answer transformation (to html) is executed in verifyphase.
Issue was submitted for html report generation.
Results are also can be seen by simply run mvn findbugs:gui
Related
How can the maven build be made to continue despite an error in one of the execution added by the Maven exec plugin?
https://www.mojohaus.org/exec-maven-plugin/usage.html
Example solution using success code:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>3.0.0</version>
<executions>
<execution>
<id>docker-rmi</id>
<phase>clean</phase>
<goals>
<goal>exec</goal>
</goals>
<configuration>
<executable>docker</executable>
<workingDirectory>${project.basedir}</workingDirectory>
<arguments>
<argument>rmi</argument>
<argument>${project.groupId}/${project.artifactId}:${project.version</argument>
</arguments>
<successCodes>
<successCode>0</successCode>
<successCode>1</successCode>
</successCodes>
</configuration>
</execution>
</executions>
</plugin>
You can use successCodes and list the error codes what you want to treat as success.
This was created for non-compliant application according to the docs docs but it is useful for such scenario.
I don't know any wildcard solution so you have to explicitly state the list of error codes for the successCodes.
TL;DR: Using maven, I want to run a plugin goal at the beginning of the test phase, before tests actually run. What would be a clean way to do it?
I want to print a message just before the tests actually run. Hence I want to use the echo goal of the echo plugin at the beginning of the test phase (to tell the user that if every tests fail, he'd better have a look at the README since there's a test environment he should set up first)
Attempt n°1
A simple approach could be to run this plugin in the previous phase, process-test-classes.
It works, but it doesn't seem semantically correct to bind this task to this phase...
Attempt n°2
According to Maven documentation, When multiple executions are given that match a particular phase, they are executed in the order specified in the POM, with inherited executions running first., so I tried to set explicitly the surefire plugin:
...
<plugin>
<groupId>com.soebes.maven.plugins</groupId>
<artifactId>maven-echo-plugin</artifactId>
<version>0.1</version>
<executions>
<execution>
<phase>test</phase>
<goals>
<goal>echo</goal>
</goals>
</execution>
</executions>
<configuration>
<echos>
<echo>*** If most tests fail, make sure you've installed the fake wiki. See README for more info ***</echo>
</echos>
</configuration>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.16</version>
<executions>
<execution>
<phase>test</phase>
<goals>
<goal>test</goal>
</goals>
</execution>
</executions>
</plugin>
...
But tests run before my message is printed.
So, to put it in a nutshell: is there a way to reach my goal, or should I stick to the "process-test-classes solution" even though it seems a bit "hacky"?
Thanks!
As #khmarbaise said, your solution is still hacky, because whole test looks like Integration Test and should be processed by Failsafe Plugin. Failsafe has nice phase pre-integration-test for testing fake wiki etc :)
Based on Guide to Configuring Default Mojo Executions this works for me:
<plugin>
<groupId>com.soebes.maven.plugins</groupId>
<artifactId>maven-echo-plugin</artifactId>
<version>0.1</version>
<executions>
<execution>
<id>1-test</id>
<phase>test</phase>
<goals>
<goal>echo</goal>
</goals>
</execution>
</executions>
<configuration>
<echos>
<echo>*** If most tests fail, make sure you've installed the fake wiki. See README for more info ***</echo>
</echos>
</configuration>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.16</version>
<executions>
<execution>
<id>default-test</id>
<configuration>
<skip>true</skip>
</configuration>
</execution>
<execution>
<id>2-test</id>
<phase>test</phase>
<goals>
<goal>test</goal>
</goals>
</execution>
</executions>
</plugin>
This is very odd for me ;)
I have two plugins with executions bound to generate-sources, one listed first in the list of about 6 plugins and the other listed last. However, the one listed last (which depends on the one listed first) always executes first.
How can I execute several maven plugins within a single phase and set their respective execution order?
I have the findbugs plugin working fine in my maven setup. I've setup findbugs to execute during the compile phase. I noticed however that it runs during the test phase as well because the test phase also calls compile. Because I have an automated build pipeline that runs all my targets, I don't need findbugs to run during the test phase. I've tried to exclude findbugs from the test phase with the following but no luck yet.
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>findbugs-maven-plugin</artifactId>
<version>2.4.0</version>
<inherited>true</inherited>
<configuration>
<failOnError>${findbugs.failOnError}</failOnError>
<skip>${findbugs.skip}</skip>
<trace>${findbugs.trace}</trace>
</configuration>
<executions>
<execution>
<phase>compile</phase>
<goals>
<goal>check</goal>
</goals>
</execution>
<execution>
<id>findbugs-test-compile</id>
<phase>test</phase>
<goals>
<goal>check</goal>
</goals>
<configuration>
<skip>true</skip>
</configuration>
</execution>
</executions>
</plugin>
It will not be called based on the running through the life-cylcle via compile it simply is running cause you configured to have two executions one in test and one in compile phase. Findbugs should usually run in the reporting area(site).
Just make a single execution:
<executions>
<execution>
<id>findbugs-test-compile</id>
<phase>test</phase>
<goals>
<goal>check</goal>
</goals>
<configuration>
<skip>true</skip>
</configuration>
</execution>
</executions>
The one you like to have. But i recommend to read the documentation cause it should run in reporting area (via site) only.
UPDATE:
If you like to run findbugs only during the site generation than just remove it from the usual build area and put into the reporting area instead.
AFAIK, the maven failsafe plugin fails safe because it has separate goals for running the tests and failing the build based on the tests. These are designed to be bound to the integration-test and verify goals respectively. This allows post-integration-test bound goals to run (shutting down the build) before the build fails.
My question is, how do I do this with the maven-soapui-plugin? I thought I could simply specify <testFailIgnore>true</testFailIgnore> in my soapui plugin config and then call the failsafe plugin verify goal, but that isn't working. I don't think I'm not sure if I'm getting a summary file out of the soapui plugin or not. I keep getting Expected root element 'failsafe-summary' but found 'testsuite' Here is a snippet of the POM:
<plugin>
<groupId>eviware</groupId>
<artifactId>maven-soapui-plugin</artifactId>
<version>4.0.0</version>
<configuration>
<junitReport>true</junitReport>
<exportAll>true</exportAll>
<outputFolder>${project.build.directory}/surefire-reports</outputFolder>
<testFailIgnore>true</testFailIgnore>
<printReport>true</printReport>
</configuration>
<executions>
<execution>
<id>FailingTest</id>
<phase>integration-test</phase>
<goals>
<goal>test</goal>
</goals>
<configuration>
<projectFile>${basedir}/testData/soapui-integration-tests.xml</projectFile>
<host>localhost</host>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-failsafe-plugin</artifactId>
<version>2.9</version>
<executions>
<execution>
<phase>verify</phase>
<id>verify</id>
<goals>
<goal>verify</goal>
</goals>
<configuration>
<summaryFiles>
<summaryFile>${project.build.directory}/surefire-reports/TEST-TestSuite_1.xml</summaryFile>
</summaryFiles>
</configuration>
</execution>
</executions>
</plugin>
Is there something wrong with my POM or is this a bad approach? Are there any better approaches?
There is an open source extension of the soapui plugin which has a separate test-verify goal for exactly this purpose.
https://github.com/redfish4ktc/maven-soapui-extension-plugin
The following example shows the required configuration:
https://github.com/redfish4ktc/maven-soapui-extension-plugin/blob/master/src/it/test-verify_goal/one_failing_project/pom.xml
AFAIK maven-failsafe-plugin can only verify success status of tests run by maven-failsafe-plugin and not by maven-soapui-plugin. It does that by reading test summary report file (failsafe-summary.xml) which has specific format.
maven-soapui-plugin could be adjusted to separate running tests from verifying test success status, to support running post-integration-test tasks (stop server, undeploy artifacts, etc.) before verification. Create a support ticket for this to soapUI guys.
Maybe even maven-failsafe-plugin, it's verify mojo, could be extended to allow specifying different test report format (JUnit style reports are supported by soapUI) or even an xpath expression which would be used by maven-failsafe-plugin to determine if there were failed tests or not. Create a support ticket for this on maven-failsafe-plugin issue tracker.
Until those extensions are supported, and you need to do tasks on post-integration-test phase you can use soapUI JUnit integration and have maven-failsafe-plugin run those soapUI JUnit tests.
I am trying this solution, and it doesn't work.
But I have found one.
To obtain de tests report of SOAPUI tests in Jenkins, I using the failsafe plugin with this configuration in the pom.xml of my Soap tests folder :
<build>
<plugins>
<plugin>
<groupId>eviware</groupId>
<artifactId>maven-soapui-plugin</artifactId>
<version>2.6.1</version>
<configuration>
<projectFile>${basedir}/soap_project_tests.xml</projectFile>
<outputFolder>${filePath.reports.soap}</outputFolder>
<testFailIgnore>true</testFailIgnore>
<junitReport>true</junitReport>
<exportwAll>true</exportwAll>
<printReport>true</printReport>
</configuration>
<executions>
<execution>
<id>run-soap-integration-test</id>
<phase>integration-test</phase>
<goals>
<goal>test</goal>
</goals>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-failsafe-plugin</artifactId>
<version>2.11</version>
<configuration>
<reportsDirectory>${filePath.reports.soap}</reportsDirectory>
<printSummary>true</printSummary>
<argLine>-Xmx512m</argLine>
</configuration>
<executions>
<execution>
<id>soap-integration-test-verify</id>
<phase>post-integration-test</phase>
<goals>
<goal>integration-test</goal>
<goal>verify</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
The tests cases status are up to Jenkins.
We've a requirement where we need to auto generate the code and use it in another project.
I'm using following code for autogenerating the code. But doing a "maven package" only generates sources and it doesn't give any errors in the log. Any help would be much appreciated.
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.1</version>
<executions>
<execution>
<id>exec-one</id>
<phase>compile</phase>
<configuration>
<mainClass>com.xx.yy.zzz.aa.bb.Autgen</mainClass>
<arguments>
<argument>-o</argument>
<argument>${srcOutputDir}/${packageDir}</argument>
</arguments>
</configuration>
<goals>
<goal>java</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
First i would suggest to generate the code in a different phase like generate-sources and next you have to tell the compiler plugin to compile that generated code as well. Take a look at the build-help-plugin for this purpose.