While downloading pip install allennlp==1.0.0 allennlp-models==1.0.0, I faced this problem:
[6 lines of output]
running bdist_wheel
running build
running build_py
running build_ext
building 'srsly.msgpack._unpacker' extension
error: Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": https://visualstudio.microsoft.com/visual-cpp-build-tools/
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for srsly
Failed to build thinc blis srsly
ERROR: Could not build wheels for srsly, which is required to install pyproject.toml-based projects
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
I have downloaded:
pip install -vvv torch
pip install numpy
pip3 install --pre torch -f https://download.pytorch.org/whl/nightly/cpu/torch_nightly.html
and it still not working.
I am using Python 3.10.2 on Windows 11 Pro.
What should I do?
I had Python 3.10 and had the same error installing psutil from pip. I fixed the problem by installing an older version of pip using the command:
pip install pip==21.3.1
You have to install the Python 3.9.10 version from python.org and after installation, upgrade your pip and everything will be sorted.
It is the problem in Python 3.10.2... This method is working. I was suffering from the same problem in installing the turtle, so I did that and error was solved.
This particular error is caused by not having a C/C++ compiler installed. As said in the error message, either install MSVC or another compiler to compile it.
Please read your error messages; they are there for a reason.
If you're using a Python 3 image, this might help:
RUN apk update
RUN apk add make automake gcc g++ subversion python3-dev
Reference from Problems with pip install numpy - RuntimeError: Broken toolchain: cannot link a simple C program
https://visualstudio.microsoft.com/visual-cpp-build-tools/
Download and install or update
Microsoft Visual C++ 14.0 or greater is required.
You must be install build visual tools 15, 17, 19, or greater.
Download from Microsoft C++ Build Tools.
To solve this problem, you need to download Visual Studio from its main page.
If Visual Studio is already installed, then when you run the installer, you can modify it (by clicking the modify button):
During Visual Studio installation (or installation modification) choose Desktop Development with C++:
First: You installed the Mingw-w64 compiler with a full MSYS2 package, and this package included Python.
Second: you get the error because the plugin is not in the Python packages installed by MSYS2.
So: uninstall MSYS2 and install a minimalistic MinGW (MinGW - minimalistic GNU for Windows).
And finally Install a version of Python from the official Python page.
Now if you can install plugins.
I've found a similar question from GitHub, and credits goes to thaibee. Here I quote:
It's a problem with Microsoft products and is
very easy to solve.
If you can't install these plugins as well,
need to download it from other repositories like this one:
https://www.lfd.uci.edu/~gohlke/pythonlibs/ depends on the version of python and the system.
For example: for my Windows 11 (x64) and Python 3.10 I took this file: pyodbc‑4.0.32‑cp310‑cp310‑win_amd64.whl
It's very easy to install: pip install pyodbc‑4.0.32‑cp310‑cp310‑win_amd64.whl
After it, the system works well and didn't ask you about VC.
This solution I found in problem with the MySQL plugin for Django. I don't understand why - but they also use VC for the installation process.
I understand your problem, and I have faced it too. I tried multiple solutions, but it didn't work, so I simply uninstalled my Python and installed some older version of it. Example: I recently uninstalled Python 3.10.2 and installed 3.9.10.
It worked without any errors.
I had a similar problem while installing with pip3: building wheel for box2d-py (setup.py) ... error
The solution was just to install SWIG prior to box2d, so I added the following steps manually:
pip install swig
pip install gym[box2d]
For Mac, there is a possible workaround for this problem if you use Conda. The idea is to create an x86 environment on the Mac and do your pip install after that.
conda create -n <name>
conda activate <name>
conda config --env --set subdir osx-64
conda install python=3.8
Here I choose Python 3.8, but you can choose another version.
If you are on macOS (maybe Apple silicon) then first try to do this from your base location of the terminal:
eval "$(/opt/homebrew/bin/brew shellenv)"
Then, do brew update and brew upgrade.
Once you are done with that, type
brew install geos
Now again go to your virtual environment and activate it (if you are working in the virtualenv) and then type:
python3.10 -m pip3 install [module name]
I was facing the same problem when executing:
python -m pip install package-name
After many failed tentatives, what fixed the problem for me was executing:
py -m pip install package-name
When I type py in the terminal, it shows this information:
Python 3.9.8 (tags/v3.9.8:bb3fdcf, Nov 5 2021, 20:48:33) [MSC v.1929 64 bit (AMD64)] on win32
When I type python in the terminal, it shows this information:
Python 3.8.2 (default, Apr 9 2020, 13:17:39) [GCC 9.3.0 64 bit (AMD64)] on win32
I believe that this problem is related to the Python interpreter version.
I tried all recommendations that were written, but none worked. My Python was 3.11.
So I just installed Python 3.8.10 from here:
https://www.python.org/downloads/release/python-3810/
And ran
C:\Python38\python.exe -m pip install matplotlib
And it worked.
I faced a similar problem while installing pandas-datareader.
I was using Python 3.11.0, and after trying all possible solutions, I downloaded Python 9.10.0 and it worked fine.
We can install DVC with the below commands:
conda install -c conda-forge mamba # installs much faster than conda
mamba install -c conda-forge dvc
For more information please refer this: https://dvc.org/doc/install/
I followed the following steps to install dlib on Linux server:
cd dlib
mkdir build
cd build
cmake ..
cmake --build . --config Release
make install
I got the following error:
detector = dlib.get_frontal_face_detector() AttributeError: module 'dlib' has no attribute 'get_frontal_face_detector'
Why am I getting this error?
Any help would be really appreciated.
I think you didn't bind python API correctly correctly.
python setup.py install
If you still have error, please post your code, sometime wrong file name also brings error.
maybe this will be helpful
try his script to reinstall dlib
https://github.com/mhaghighat/dlib_ubuntu_install
after running install script , run setup.py in dlib folder
I have build a website with Erlang and Cowboy with ErlyDTL on a Linux OS.
Now I want that my website can run on Windows and want to use the Erlang.mk with Relx build tool.
When I give the make command it gives me the error:
Unable to detect platform. Please open a ticket with the output of
uname -a.
uname -a output:
MINGW32_NT-6.2 LENOVO-... 2012-11-21 22:34 i686 Msys
How can I fix this problem in a easy way with explanation because I don't know much of makefiles ;).
Specs:
I have Windows 8.1 64 bit OS.
My Erlang.mk is version 1.2.0-634-g2f69190.
I installed MinGW with msys so I can run make and make distclean.
I have the following extra packages installed during this intallation:
mingw-developer-toolkit
mingw32-base
mingw32-gcc-g++
msys-base
So the PATH to MinGW is c:\MinGW.
With CMD I started C:\MinGW\msys\1.0\msys.bat
Then with the bash shell I ran de postinstall script pi.sh. This gave me no errors.
Then I have installed some extra packages for MinGW with success:
mingw-get install msys-rxvt
mingw-get install msys-unzip
mingw-get install msys-zip
mingw-get install msys-wget
I have red https://github.com/ninenines/erlang.mk/issues/294 but I couldn't understand what I have to do because the lack of explanation.
So is there a solution? If yes what is it and please give some explanation with it so I can fix my problem and understand what I'm doing.
Thanks in advance
I have been able to install Caffe but I had a lot of issues and that's because I didn't follow the instructions very well.
I have a Mac OSx and I'm reading the OSx guide for installation.
In this point:
when I type hdf5 opencv I get:
"hdf5: command not found"
I've tried to install hdf5 by Homebrew and MacPorts but I'm still getting:
"hdf5: command not found"
Does anyone have any clue?
Thank you very much.
according to the answer of #mattias, my binaries in /usr/local/hdf5 are:
hdf5 is not a command or anything else. The documentation is just bad, it has to be:
brew tap homebrew/science hdf5 opencv
So, what I mean is, we have to install hdf5 and then link it to Caffe. But executing hdf5 is not what the guide meant.
You can install hdf5 from source. I just tested on OS X 10.9.5.
wget http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.14.tar
Unpack,
tar zxfv hdf5-1.8.14.tar
Enter directory
cd hdf5-1.8.14
And then,
./configure --prefix=/usr/local/hdf5 # or where you want it
make
sudo make install
Then you have it installed in /usr/local/hdf5.
Good luck!
When I'm trying to build Apache Thrift source in cygwin, I'm getting error saying "Couldn't find libtoolize!". How can I install libtoolize in cygwin?
You will need GNU M4 1.4.6 or later to install LibTool (which includes libtoolize).
Good news is that you can easily do it if you run the Cygwin installer (no worries, it will keep your Cygwin installation and add new packages if you select them). So all you need to do is to click on the following buttons:
GNU M4 installation
LibTool installation
'libtoolize' is a part of libtool. You can dowload latest version of libtool from http://ftp.gnu.org/gnu/libtool/, extract it, then run ./configure and make install from cygwin terminal.
Use this:
python -mpip get-install libtoolize