I'm trying to install Pfsense 2.3.4 on a system having an Atom processor and a Seagate Barracuda 500GB SATA HDD.
Pfsense flashes correctly i.e. there are no errors during installation. However, after it reboots it gets stuck in a bootloop. All I'm able to see is this on the console
F1 pfSense
F6 PXE
Boot: F1
after which the machine restarts and this continues indefinitely.
When installing, I made sure to uncheck 'Packet Mode' as that was causing this bootloop issue with many user but that hasn't solved it.
I've tried 2 hard drives and a CF card but the issue persists.
My device is the Lanner FW-7525
Any help would be appreciated!
TIA xD
Did you use the serial console variant of pfSense?
Your system could be trying to load vga frame buffers which don't exist on your hardware, failing, then boot looping.
You may also be striking the Atom C2000 bug. https://www.servethehome.com/intel-atom-c2000-series-bug-quiet/
I'm not sure if this applies to the issue you require resolving but a number of issues seem to be similar.
Firstly my install was upon a hypervisor and the installation I thought went just fine but upon powering on the VM I came across issues with booting from the designated storage device.
My solution, however, resolved itself by using the previous release and nothing more.
It just seems quite strange that the storage you have is unusable too but you seemed also to have what appeared to have a smooth install process without error.
-Sorry, that the best-educated personal experience knowledge I can offer you, hope you reach a solution.
Related
Situation: New PC Build
- Windows 10
- Samsung Evo 970 256GB NVME
- WD Blue 1TB potato drive
- AMD Ryzen 7 2700X on Asus Crosshair VII Hero
- GTX 1070
One of the main benefits of Ryzen 2, for me, was the StoreMI feature that I really hope to get working. I watched AdoredTV's video of how he set his up, but unfortunately for me, I'm not having any luck.
Greyed Out no option to create Bootable StoreMI
I have gone into Windows Disk Management and made sure the drives are visible to the OS, and they are also visible in File Explorer.
Windows Sees the Drives
If I try to remove fast media, I get this message, and the program closes.
If I try to modify, I get nothing useful.
So...I need some help figuring out what I've done wrong. Could I have something in the BIOS I need to fix? Other? I'm at a total loss.
Edit 1) I may have another clue? One of my greyed out drives is the same drive as the drive that's selectable, and they're "both" in a Tier. Looking at the Disk Manager, it seems my "System Reserved" is for some reason on the NVMe drive when it should have...I would have thought...been installed on the same drive the OS was installed on. I know I didn't tell Windows to do this.
So maybe this is a clue? Can I move the "System Reserved" Partition over to the spinning rust? Would that help?
Same Drive occupies both tiers?
Ok, well AMD customer support never emailed me back. It's been about 48 hours now. Not counting the RTFM email which was useless.
So...I figured...Maybe I'll ask the people I learned the most about this from, either AdoredTV, or Level1Techs. So I went to the Level1Techs forum, and talked to Wendell himself. He diagnosed and suggested a fix (that worked) in about 5 minutes. On my Windows install, I selected the C: (slow) drive to install the OS on, however, the OS set up the "System Reserved" partition on the NVMe drive...even though I never said to do that...it never asked if that's what I wanted to do...It just did it. Effectively nullifying the ability of StoreMI to work.
Why AMD can't do what a youtuber can in 5 minutes is beyond me...and pretty inexcusable. But I digress...
What I had to do was start over. Backed everything up, inserted my Windows 10 installation USB, booted from that, and ****-F10 into a command line from there.
From there, I cleaned all my drives.
Next, I physically removed my NVMe from the motherboard, then went about reinstalling the OS on the slow drive...now the only drive in the system, so it was forced to partition that.
Once that was done, and the OS was completely installed, I shut down the system and reinstalled the NVMe.
Rebooted the system, and I was then able to configure StoreMI easily.
TLDR: If you are doing a new system build, with a fresh Windows install, and want to use StoreMI... My recommendation is to install ONLY one HDD into your system (AMD recommends the install take place on the slowest drive). Complete your Windows install, then install the remaining drive or drives (you can only use two drives with StoreMI), install StoreMI and configure.
I recently dual booted my Acer aspire E15 laptop with Ubuntu. The Ubuntu was working fine but when I opened the windows from grub menu, wireless networks like wifi wasn't detected and any exe files are not opening rather a bad image error is popping up which reads:
“Example.exe – Bad Image”
“C:\Windows\AppPatch\example.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0xc000012f”
It comes up when I open any kind of exe files including even task manager.
I even deleted Ubuntu and included the partition created by Ubuntu into C drive. I guess I have made a huge mess of the PC by changing the settings. I tried regedit method as well but the value in AppInit_DLLs was null by default. I even tried resetting the pc but after 11% it is saying can't proceed,undoing the changes. Somebody please help, I have watched plethora of YouTube videos on this topic but to no avail. I did these changes in my bios https://askubuntu.com/questions/771455/dual-boot-ubuntu-with-windows-on-acer-aspire as well given by Umar having 5 upvotes during dual booting. How can I undo everything just like my new computer with windows 10 or fix this problem.
Try contacting Microsoft Remote Assistance Support, they will format your PC via remote assistance. It worked for me.
ive got a sony vaio duo 13.
ive gone into bios using the assist key and enabled intel virtualisation tech setting. The emulator stll doesn't work.
all programs run from this site have returned that it supports hyper v but that it is not turned on?any ideas?
http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj863509(v=vs.105).aspx
The answer was not exactly obvious. After reading everywhere about intel trust execution needing to be disabled, I decided to attempt to disable anything to do wit bitlocer. On my specific hybrid, there was a setting labelled "secure boot mode", there were a few options here but I tried to just disable it. Hey presto that was the sucker. I hope this helps someone else.
Edit::
Above answer was actually incorrect. If you change the bios setting on my laptop, then shutdown and start up. nothing happens. if you then restart the computer a whole load of hardware fails, butttt intel VT works finally lol. It must have been dumb luck it worked before. But the shutdown/restart combo works predictably. Unfortunately it totally knocks out some of my other hardware (touchscreen, key lights) rendering this entirely freaking useless :(
I've got an old 16-bit application, that was developed for Windows 3.1. It preforms some calculations and is part of a more complex system. The system sets up the inputs for the program, and collects the output results.
Unfortunately, the 16-bit program is here to stay for the mean time, so we have to work around the frustrations it causes on modern operating systems.
The system runs on Windows XP, and on physical Windows XP machines it runs alright. The machine I'm having a problem with, is a Windows XP instance running on VirtualBox (version 4.1.12) on a Debian box. The physical computer is an HP Proliant server, with Quad Core Xeon 3.4 Ghz. I'm using remote desktop to access the computer from my Windows 7 box.
The error I'm getting is, "PROGRAM caused a General Protection Fault in WIN87EM.DLL at address : 0001:02C9". The annoying thing is, at times it works and other times it doesn't, making troubleshooting all that more frustrating.
From trawling the internet, I've come across a few sites that mention the same problem. None of them seem to offer real solutions, except to say that WIN87EM.DLL supplies floating point routines, and has some issues with certain printers.
I've uninstalled all printers on the virtual machine, I've also tried installing a PDF writer and setting it as the default printer - so that there is a printer on the machine. I've disabled resource sharing with my Remote Desktop connection. I've updated the Virtual Machine Guest drivers on the machine. I've also tried setting the compatibility to Windows 95 in the properties of the executable.
Any pointers for troubleshooting this problem, or methods I could try to get it working?
This question is old but I had this exact win87em.dll crash with some 16-bit factory automation software running natively on windows 7. By following the method of HIDE87.com and editing autoexec.nt I was able to make the software stop crashing so that I could make edits.
This machine was running Intel 8 Series/C220 Series chips. I attribute this configuration to the crash because I have used this same 16-bit software on tons of other windows 7 machines for years now.
edit: here's the steps I used to fix the problem
Download winfloat.exe from http://www.conradshome.com/win31/archive/
Open winfloat.exe with 7zip. Find HIDE87.com and extract it to desktop.
Copy HIDE87.com to C:\Windows\System32\
Open c:\windows\system32\autoexec.nt with notepad
At top of file, after first group of comments add the following
lh %SystemRoot%\system32\HIDE87.com
Add a comment above your last line
REM Fix for Gen. Protection Fault in win87em.dll
Save changes to autoexec.nt and reboot pc.
This was the same error I had with Microsoft XP Mode.
Obviously WIN87EM.DLL has Problems with virtualized processors.
My Solution: I "unloaded" the XP-Version of WIN87EM.DLL in the registry (search and delete every item with this name), and copied a much older version into application folder. The old version can be found her: http://support.microsoft.com/kb/86869/de
Good luck!
Video Driver win87em.dll
This is the step by step resolution to the problem we had with the “win87em.dll” issue.
Left-Click the START button in the bottom left corner of the screen.
Right-Click My Computer and left click Properties.
Left-Click the tab at the top that says Hardware
Left-Click the button that says Device Manager.
Left-Click the + sign next to Display Adapters near the top of the list.
Right-Click the items shown in the expanded list under Display Adapters and left-click Disable.
Left-Click the Yes button that shows when windows asks if you are sure you want to disable it.
Left-Click the No button when windows asks if you want to reboot.
Repeat the disable process for each item listed under Display Adapters (usually only one or two)
Reboot the PC and the win87em.dll General Protection Fault errors should go away.
This is only applicable for users on Windows XP. Most likely the display adapters listed will be shown as an Intel G41 internal display adapter, but it may be another Intel device. If this does not fix the issue then it is likely a bad printer driver causing the problem.
Disabling the video adapter will not hurt windows. It will make their computer unable to watch videos or play 3D games, but windows will still run and look fine. (They will probably need to change their screen resolution after rebooting.)
VirtualBox 4.3.16 should also have a fix. See https://www.virtualbox.org/ticket/12646 If you want the fix immediately, you'll have to build VirtualBox from OSE sources.
Update: VirtualBox 4.3.16 containing this fix is now officially released.
I know this is an old thread but I came across it while searching as I was having the same issue under Windows XP running VirtualBox. Eventually I found the following:
https://communities.vmware.com/people/jmattson/blog/2012/03
This is for VMWare and seems to have fixed the issue, couldn't find anything similar for VirtualBox but as VMWare Player is free it is a good workaround for anyone having this problem.
in the case of virtual machines - vxBOX (tested) of VM ware (maybe)
you just have to switch off all para virtualization options in the processors section of VX BOX options.
works like magic!
I started on Ubuntu and have had the first considerable error. I'm looking for help.
I have an HP Pavilion dv6 i7. I had installed windows 7 and I decided to also install Ubuntu using a USB.
My first attempt was to install Ubuntu 11.10 following the instructions of the official Ubuntu website. When loading the pendrive, my PC stucks at the main menu of ubuntu, so after searching, I found could be due to a problem with my AMD Radeon graphic card (or not), but I decided to change.
Then I used Ubuntu 10.4. This could happen from the start menu i get into Ubuntu live. There I decided to install it because I liked it and I need to develope with Google TV (in windows is not posible).
And I fail in the partitions section. I tried to follow the instructions on this page:
http://hadesbego.blogspot.com/2010/08/instalando-linux-en-hp-pavilion-dv6.html
but there were things that changed a bit so I improvised. I took the windows partition of 700000MB and went to 600000Mb leaving 100GB free to install Linux there. The error was to set it to ext3 (it was ntfs). I thought the new 100gb partition will be set to ext3, and windows partition will stuck at ntfs system, but not.
Total I ran out to boot windows, and above I can not install ubuntu on the 100GB free.
Someone thinks I can help. Is there any easy way to convert back to ntfs windows and not lose data?
Thank you very much.
You should be able to hit F11 when the machine is booting up and go to the HP recovery application. This should let you reset to factory default.
You should definitely be able to install Ubuntu on the new 100GB partition as well. Just make sure you choose the right partition to install it on.
You will need to recover using recovery CD/DVD's. You must have been using the install gparted utility in Linux to "re-partition" your drive. You scrubbed some boot files.
If you successfully recover using the recovery media you can use Disk Management in Win 7 to shrink or extend your volume. In your case you would shrink it down 100Gb's and then when installing Linux gparted will see that available 100 GB and install there while Windows will still run.
Also, you should probably be running ext4 fs, not ext3. you would only want ext3 for compatibility reasons.