I accidentally wiped-clean my Toshiba Satellite's hard drive, including the recovery partition and the preloaded Windows 10 that was stored on it. Now, the only option I believe I have is to download the ISO, burn it to a DVD or flash, boot the laptop from it and install Windows 10.
If so:
Will Windows 10 be automatically activated ?
Will Windows detect the laptop is one with preloaded copy of Windows and as such license it automatically ?
I don't have any product activation code, the only code printed on the laptop floor is the laptop's serial number...
Thanks.
Anecdotally, the same thing just happened to me. I deleted all partitions and re-installed it completely fresh on a Dell Latitude laptop, figuring I'd lost the license.
In my case, the laptop is licensed just fine. I didn't do anything specific to license it.
As a side note, The ISO I downloaded didn't specify version, though it defaulted to Windows 10 Professional before when I used it on a custom-built machine. This one defaulted to Windows 10 Home, something I also didn't specify. I don't remember for sure which version I had before I nuked it.
I first created system images using Windows backup then realized that those VHD files cannot be booted using Virtual PC.
So I found the utility Disk2VHD and spent a few hours making a new VHD and tried booting it with Virtual PC but it too cannot boot.
It is giving the error:
PXE-E53: no boot filename received
I followed some instructions found online on going into the Virtual PC settings and ensuring I have the right vhd set up which I do, I also have integration features unavailable.
I then went into the Virtual PC's BIOS and in The Boot menu and it says under Hard Disk Drives [Virtual HD] and in the boot priorities the 1st boot device is the Hard Drive.
This VHD is created from my C: which is my main Windows install (Windows 7 Pro 64-bit)
The whole goal of this is I want to format my drive and install new Windows but I wanted to be able to make a bootable image I could go into later to recover things as needed and see how stuff was setup if I forgot.
When you converted it over, did you check in the checkbox which allows the file to be used in Virtual PC? I forget what it's called but in there is a checkbox you have to click in before you convert it over.
Also make sure the drive isn't bigger than 127GB or Virtual PC won't recognize it.
I just upgraded my system to win8 pro (a clean install of course) and everything runs as it should - besides that Windows denies me to access my Netgear ReadyNAS Duo. I can see that it is connected to my network, since it has been given an IP. That is pretty much it though. I can't see the drive in the Network section, can't map it or access it.
The drive itself is fine, since I can access it from my other machine running win7.
Has anybody experienced something similiar and/or knows a workaround until microsoft fixes the problem?
Thanks in advance!
I was so happy today that I have been finally able to install Windows Phone 8 SDK and try it a bit. I installed fresh new installation of Windows 8 Pro into my virtual machine (I am running if from Parallels) and then installed Windows Phone 8 SDK.
Everything went smooth, Visual Studio Express is installed and running, but when I created new project and tried to deploy it, VS fails with really weird message.
First of all, message box informing that "The Windows Phone Emulator wasn't able to create the virtual machine: Generic failure" appears. Really informing, really professional - generic error, that's really good. Then the information that deployment failed appears (thanks a lot for keeping me informed about that, I didn't noticed that it crashed completely). And then in the Error List, there is an information about "Invalid pointer" - even better. No clue at all about what failed or what's wrong.
Can anybody help me with that? There is nothing on the internet about this topic so far and I don't know where the problem is. I scanned the Windows events and logs, but there is nothing (probably I haven't been searching properly, so please guide me through that if you can).
Anybody can help?
The Windows Phone 8 emulator requires hardware Hyper-V support. In particular, it requires second-level address translation, hardware assisted virtualization, and hardware DEP support enabled and to not be ran in a hypervisor(no nesting). If you bought your machine within the past 4 years you should have no problem with these requirements. You can check out this article to see more information about that and how to find if your PC supports it.
Because of these hardware requirements, this means you can't run the phone emulator inside of most virtualization technologies... With one exception: I've been using VMWare 9 which appears to include an "unsupported" feature to allow Hyper-V to work though.. So your only choice for running the phone emulator is to either buy VMWare 9 (or 8 with more configuration) or upgrade a physical machine to Windows 8
The unsupported way VMWare allows you to run Hyper-V inside of a VM is that there is a manual option (hypervisor.cpuid.v0 = “FALSE”) which basically tells VMWare not to report to the virtual machine that it's running in a VM. Hyper-V checks if it's running in a VM and won't work if it is, so this gets Hyper-V to work past that check. I personally have tested this whole nested-VM thing with the Phone emulator(including before public release), and other than being quite slow, it does work pretty well with no immediate crashes or anything.
There is a workaround for VMWare Workstation 8 as well in an answer below. However, 9 is much easier to configure, so if you have it use this method.
I ran into the same issue and I fixed it by enabling Hypervisor applications in this virtual machine and adding the following line to the .vmx file:
hypervisor.cpuid.v0 = "FALSE"
This got the emulator working just fine. I found this answer here.
Hope this helps.
Actually, it works quite nicely with VMware Fusion 5.0.1
All I had to do is to add to the .vmx file of the virtual machine the following lines:
hypervisor.cpuid.v0 = “FALSE”
vhv.enable = "true"
Save and restart VMWARE (obviously the VM must be stopped before the changes are made)
I'm right now debugging a test app from VS2012 using the emaulator inside a VM in my Macbook
I'm a happy camper
:-)
I posted the same question on Parallels forum.
Reply:
The emulator is actually a virtual machine, so we are talking about a vm inside a vm, this requires support for nested Hyper-V, which afaik is planned but not implemented yet, also VMWare Fusion already supports this, if you are so desperate.
————-
See Parallels forum post: http://forum.parallels.com/showthread.php?p=646448#post646448
This works for me
Set RAM to 4g
Set at least 2 cores
add to vmx file.
vhv.enable = "TRUE"
hypervisor.cpuid.v0="FALSE"
Goot article
http://social.msdn.microsoft.com/Forums/en-US/wptools/thread/ed72010c-321c-4667-97b2-3ff1540e7f87/
You need SLAT compatible hardware to run Hyper-V, which is a requirement for using the emulator.
Can you clarify what kind of hardware you're attempting to run this on, and if you have enabled Virtualization in your BIOS settings?
The "Invalid pointer" error just means it cannot connect to the emulator (and/or device).
Just as an addition to https://stackoverflow.com/a/13163762/1964969 (top answer at the moment):
manually appending "hypervisor.cpuid.v0" key works for VmWare Player 5 as well (the main reason - this software is free for non-commercial use so it's perfect product if you test the waters, just download from VmWare website and install, it's fully-functional).
Slightly unexpected, any of the following amends solve the problem with WP8 emulator:
hypervisor.cpuid.v0="FALSE"
hypervisor.cpuid.v0="TRUE"
hypervisor.cpuid.v0=""
Yeah, you can apply empty value for that key - but why? Have no idea but it works. I did some notes in my blog as well:
http://windowsasusual.blogspot.ru/2013/01/how-to-launch-windows-phone-8-emulator.html
Under Parallels Desktop 8 follow this guide: http://kb.parallels.com/en/115211
Edit:
Oh, I didn't noticed that you are trying to run emulator on VM. My answer is for non-VM environment.
First of all, you need to check hardware requirement at here
Be careful, successful installation of SDK does not guarantee "your hardware is compatible"
If your hardware is compatible and Hyper-V is running(described in the link above), please check your BIOS and be sure to enable hardware virtualization in CPU Configuration
(for me, I could find it at Booting > BIOS > Advanced > Advanced > CPU Configuration)
Brief summary:
64bit CPU and OS
4GB RAM
Hardware-assisted virtualization supported CPU
Second Level Address Translation (SLAT) supported hardware
Hardware-based Data Execution Prevention (DEP) supported hardware
Proper BIOS settings
For me the solution adding line:
hypervisor.cpuid.v0 = "FALSE"
I use VMware Player and added the line (hypervisor.cpuid.v0 = "FALSE")in the .vmx file.
My virtual machine with Windows 8 Pro runs the emulator for Windows Phone 8 perfectly.
Solved the problem by uninstalling an older VPN client from the machine. It turns out some VPN clients might have compatibility issues with Windows 8. After uninstalling VPN client I was able to run the emulator without issues (of course after making sure Hyper-V was installed and enabled on the machine)
Not enough rep. to comment on the accepted answer, but Microsoft provide instructions specifically for Fusion here. It worked for me, after a couple of reboots of both Mac and VM. I installed W8.1 without Hyper-V support initially and had to install it after the fact ("Turn Windows Features On or Off" in Control Panel), but apart from that no problems. Quite speedy on a 16Gb 2013 MBP.
I've got an old 16-bit application, that was developed for Windows 3.1. It preforms some calculations and is part of a more complex system. The system sets up the inputs for the program, and collects the output results.
Unfortunately, the 16-bit program is here to stay for the mean time, so we have to work around the frustrations it causes on modern operating systems.
The system runs on Windows XP, and on physical Windows XP machines it runs alright. The machine I'm having a problem with, is a Windows XP instance running on VirtualBox (version 4.1.12) on a Debian box. The physical computer is an HP Proliant server, with Quad Core Xeon 3.4 Ghz. I'm using remote desktop to access the computer from my Windows 7 box.
The error I'm getting is, "PROGRAM caused a General Protection Fault in WIN87EM.DLL at address : 0001:02C9". The annoying thing is, at times it works and other times it doesn't, making troubleshooting all that more frustrating.
From trawling the internet, I've come across a few sites that mention the same problem. None of them seem to offer real solutions, except to say that WIN87EM.DLL supplies floating point routines, and has some issues with certain printers.
I've uninstalled all printers on the virtual machine, I've also tried installing a PDF writer and setting it as the default printer - so that there is a printer on the machine. I've disabled resource sharing with my Remote Desktop connection. I've updated the Virtual Machine Guest drivers on the machine. I've also tried setting the compatibility to Windows 95 in the properties of the executable.
Any pointers for troubleshooting this problem, or methods I could try to get it working?
This question is old but I had this exact win87em.dll crash with some 16-bit factory automation software running natively on windows 7. By following the method of HIDE87.com and editing autoexec.nt I was able to make the software stop crashing so that I could make edits.
This machine was running Intel 8 Series/C220 Series chips. I attribute this configuration to the crash because I have used this same 16-bit software on tons of other windows 7 machines for years now.
edit: here's the steps I used to fix the problem
Download winfloat.exe from http://www.conradshome.com/win31/archive/
Open winfloat.exe with 7zip. Find HIDE87.com and extract it to desktop.
Copy HIDE87.com to C:\Windows\System32\
Open c:\windows\system32\autoexec.nt with notepad
At top of file, after first group of comments add the following
lh %SystemRoot%\system32\HIDE87.com
Add a comment above your last line
REM Fix for Gen. Protection Fault in win87em.dll
Save changes to autoexec.nt and reboot pc.
This was the same error I had with Microsoft XP Mode.
Obviously WIN87EM.DLL has Problems with virtualized processors.
My Solution: I "unloaded" the XP-Version of WIN87EM.DLL in the registry (search and delete every item with this name), and copied a much older version into application folder. The old version can be found her: http://support.microsoft.com/kb/86869/de
Good luck!
Video Driver win87em.dll
This is the step by step resolution to the problem we had with the “win87em.dll” issue.
Left-Click the START button in the bottom left corner of the screen.
Right-Click My Computer and left click Properties.
Left-Click the tab at the top that says Hardware
Left-Click the button that says Device Manager.
Left-Click the + sign next to Display Adapters near the top of the list.
Right-Click the items shown in the expanded list under Display Adapters and left-click Disable.
Left-Click the Yes button that shows when windows asks if you are sure you want to disable it.
Left-Click the No button when windows asks if you want to reboot.
Repeat the disable process for each item listed under Display Adapters (usually only one or two)
Reboot the PC and the win87em.dll General Protection Fault errors should go away.
This is only applicable for users on Windows XP. Most likely the display adapters listed will be shown as an Intel G41 internal display adapter, but it may be another Intel device. If this does not fix the issue then it is likely a bad printer driver causing the problem.
Disabling the video adapter will not hurt windows. It will make their computer unable to watch videos or play 3D games, but windows will still run and look fine. (They will probably need to change their screen resolution after rebooting.)
VirtualBox 4.3.16 should also have a fix. See https://www.virtualbox.org/ticket/12646 If you want the fix immediately, you'll have to build VirtualBox from OSE sources.
Update: VirtualBox 4.3.16 containing this fix is now officially released.
I know this is an old thread but I came across it while searching as I was having the same issue under Windows XP running VirtualBox. Eventually I found the following:
https://communities.vmware.com/people/jmattson/blog/2012/03
This is for VMWare and seems to have fixed the issue, couldn't find anything similar for VirtualBox but as VMWare Player is free it is a good workaround for anyone having this problem.
in the case of virtual machines - vxBOX (tested) of VM ware (maybe)
you just have to switch off all para virtualization options in the processors section of VX BOX options.
works like magic!