Codemaid did not load correctly - visual-studio

I have MSVS 2013 and Windows 7.
I'v tried to install Codemaid, but there is a mistake, when I launch a studio:
The 'CodemaidPackage' package did not load correctly.
The problem may have been caused by a configuration change or by the
installation of another extension. You can get more information by examining
the file
'C:\Users\xxxx\AppData\Roaming\Microsoft\VisualStudio\12.0\ActivityLog.xml'.
There are some errors from Log:
<errorinfo>Exception has been thrown by the target of an invocation.</errorinfo>
<description>Package failed to load; error message suppressed by skip flag</description>
May somebody give an advice?

Do you know what version of .NET you have installed? Starting with CodeMaid v10.3, .NET 4.6.2 was required.
There's some more information here: https://github.com/codecadwallader/codemaid/issues/443
If that doesn't answer your question, opening issues directly on the repository is usually the best way to get help. https://github.com/codecadwallader/codemaid/issues

Probably this can help you there is a known bug
https://github.com/codecadwallader/codemaid/issues/634

Related

Problems Installing VSCode to Windows 10

Can anyone help me out whilst I still have some hair left.
I have been running VSCode on Windows 10 since January. Yesterday it attempted to update to the latest version 1.54 but failed. VSCoce will now not run.
I am trying to re-install from the VSCode site installer. However when I download and run the installer file windows gives an error saying the file is corrupt.
Windows Error Message
I seem to remember having this problem when installing the 1.52 version in January but I can find no reference to what I did to resolve this. I believe I was pointed to an alternative install program, but I cannot find this now.
Please can anyone assist?
Many thanks.
Colin Murdoch.
OK. I have now managed to re-install VScode by downloading the .zip file and extracting all the elements into a directory within Program Files. It remains to be seen if this will work properly as with no official install routine, nothing will have been added to the registry. However the program loads OK and seems to recognise the PlatformIO extension that was already loaded.
I still don’t understand why I cannot run the official install routines. There must be something odd about my Windows installation.
check your antivirus program. I recognize that message. I had the same issue when trying to install an SQL server.

Visual Studio crash when Deploy SSRS Report

Using Visual Studio 2013, when try to deploy the Report, the session Crash
I attach the messages
Do you have any idea to solve this issue?
by Event Viewer
I already followed this way - BUT the issue has not been resolved.
http://www.wkcerp.com/ax/crash-or-hang-during-ax-project-or-report-build-visual-studio-2013-ax-r3-cu8/
Thanks
I had the same issue here, and in my case the problem was a faulty installation of the SQL ADMd.Net components. Try and reinstall those.
There is a DLL, named Microsoft.AnalysisServices.AdmomdClient.dll, which could not be found in my case. This caused a stackoverflow exception in my case. The admin reinstalled those components, and the DLL got installed, too. Deploying reports is now possible :).
I figured this out by attaching one VS instance with debugging enabled to another VS instance, with which I tried to deploy reports.
Also, I had to enable debugging for .NET Code in the settings.
I set a breakpoint at the function
Mscorlib.dll!System.Runtime.TypeHandle.GetTypeByName
And that's where I noticed, that the same block functions were called over and over, trying to load the DLL, but not being able to find it. It is the nLoad function.
(https://referencesource.microsoft.com/#mscorlib/system/reflection/assembly.cs,460c8abec12d58cd).
This eventally caused the Exception, and the exception code 0xc00000fd, which is a Stackoverflow exception.
I can't post images here, but I hope it's still understandable.
Best regards,
Jannik.

500 Internal Server Error after installing VS10sp1-KB983509

When I tried to use an Ajax control toolkit, I get a grey out error and searching around they said installing VS10 Service pack could help to solve the problem. So I did install it and now I got a serious problem:
I can no longer load the website that I can load normally before, it shows this error:
Server Error. 500 - Internal server error.
I tried many ways and finally found this one looks quite close to what happened to me:
http://support.microsoft.com/kb/842329
And I tried what it suggested:
go to C:\Windows\system32\mcfc42.dll-> properties\security\Edit\Add
Added:
Iwam_computername or computername\Iwam_computername
Also added:
Everyone
Allow Full control to all.
Restart server. But still the same problem. Please help me to fix this problem, unfortunately my server did not install backup option before I install VS SP1 so I could not recover to the previous point. Any solution ? If I cannot access it, no way I can code and test my website...
I found the solution for this. At first, to narrow down the problem I load the website at server side (not at client side) then I see this error lines in my web.config file, I think when I click at property at project in VS and choose .net 4.0 then back to 3.5 it add some duplicate to my web.config file. I just add all the first lines related to .net 3.5 and keep the xml format correct then it works fine now! Many thanks !!

VB6 Error 50003 Unexpected Error: is the solution to re-register DLLs?

If the above error is shown during the execution of a VB6 app, is the solution to re-register DLLs that it might be accessing at the time?
Or is this an issue about versions of DLLs not being correct?
Or you might have added an Icon to your application and is not compatible with the OS version just like what happened to me.
Change the icons in your form.
I've seen this error before with controls (ocx). It can usually be solved by recompiling the program with the latest version.
If that's not the issue, I find a good brute-force method to clean the registry and check you have the correct version installed is to simply delete the dll in question (or just rename it) and then use a utility like CClean to delete the orphaned entry. I admit it's a sledgehammer to crack a nut.
You might check the exe/dlls with a tool like Dependency Walker to see if there is a missing component:
http://download.cnet.com/Dependency-Walker/3000-2086_4-10052198.html

Error while opening file in VS2010 Beta 2

I installed VS2010 B2 on my Win 7 machine. I create a simple DLL project and try to open the file Class1.cs that gets created by Default. I get a error message "The operation could not be completed. Invalid Pointer. So far i have seen this and similar error messages on previous versions of VS2010. Anyone else faced and solved this problem?
Answer: It seems i have to use true type fonts. The moment i changed the editor font from Inconsolata to Consolas the problem was fixed. Found this solution connect.microsoft
Sounds like a pretty fatal error in a fundamental operation, so it's unlikely to be a simple bug that was overlooked - it's more likely to be a problem with your install - If it were me, I would try reinstalling it (and do so with the default options - if the install was customised it's vaguely possible that a required component was not installed)
I had this problem when trying to put a style element on an .ascx page. Lots of times you can solve the error by saving the file, closing the page, then re-opening it.

Resources