virtual adress size: 32 bits
page size = 4K =2^12 bytes
what is the number of pages?
i know the answer is (2^32)/(2^12) = 2^20 but why?
i think it should be (2^32)/(2^15) because of the byte bit conversion (2^12)*(8)=2^15
Every byte in memory has a numeric address starting from 0. The CPU has one or more registers which hold the address of that one byte which is being worked upon. A register is a physical device and has limits to how large a number it can store.
virtual address size: 32 bits
This means the address register can store one address (number) which could be anything between 0 and 2^32 -1.
As the largest address that the address register can store is 2^32 -1 there is no point in having more memory bytes. Because the CPU will never be able to work with them. So in general we assume the total memory to be 2^32 bytes.
page size = 4K =2^12 bytes
The total memory of millions of bytes is actually organized in chunks called pages. Here total memory of 2^32 bytes is chunked into pages of 2^12 bytes.
what is the number of pages?
the answer is (2^32)/(2^12) = 2^20. Good job!
but why? i think it should be (2^32)/(2^15) because of the byte bit conversion (2^12)*(8)=2^15
Here 2^32 is the total number of bytes in memory. 2^12 is total number of bytes in a page. Both numerator and denominator should be in same units - bytes. So you need not convert the denominator to bits.
Note:
I have used over simplification of terms like memory, address, register etc. Many of the statements made above are not valid for a real laptop - but useful for initial learning.
Related
My question is related to memory segmentation in 8086. I learnt that,
8086 has a 20 bit address bus. And so it can address 2^20 different addresses. Which means it has an memory size of 2^20, i.e, 1MB.
I have a few doubts:
What I understand from the fact that 8086 has a 20 bit address bus is that it could have 2^20 different combinations of 0s and 1s, each of which represents one physical address. What I don't understand is that how does 2^20 different address locations mean 1 MB of addressable memory? How is total number of different addresses locations related to memory size (in Megabytes)?
Also, correct me if I'm wrong, the 16 bit segment registers in 8086 hold the starting address of the different segments in the memory (Code, Stack, Data, Extra).My question is, aren't the addresses in memory of 20 bits? Then how can the 16 bit register hold 20 bit addresses? If it contains the upper 16 bit of the 20 bit address, how does the processor make out to which exact address location it has to point?
P.S: I am a beginner is micro-processors and total reliant on self study, so kindly excuse if my questions seem a bit silly.
Thanks in advance.
For this question, its important to remember there is a different between the number of possible memory addresses and the amount of actual memory (RAM) installed in the system. For the 8086, memory addresses are 20-bits long as you note, so that means there are 2^20 possible memory addresses (which is exactly 1 MiB in size since 1 MiB is 1024 or 2^10 KiB and 1 KiB is 1024 or 2^10 Bytes). This does NOT mean the system has 1 MiB worth of RAM necessarily, it very likely has less but the most addresses the 8086 could possibly address is 1 MiB; so if nothing but RAM was in the address space, the most RAM it could possibly have is 1 MiB. Frequently, you might have gaps in the address space not filled with anything, some of the address space is used for ROM or other peripherals. So, that size of the address space is 1 MiB but that does not mean there is 1 MiB of RAM/memory in the system.
Correct, the segment registers are all 16-bits for the 8086. A memory address is created by combining the appropriate segment register with the argument (the argument being the result of whatever the addressing mode being used by the instruction) by adding the argument to the segment register's value shifted by 4 bits. So, if for example the ss is 0x1111, sp is at 0x2222 and you preform a push ax instruction, the 20-bit address to which the value is pushed is (ss << 4) + sp or 0x11110 + 0x02222 = 0x13332. More information can be found on Wikipedia under the Real Mode section: https://en.wikipedia.org/wiki/X86_memory_segmentation
This question is mostly just to clarify my understanding.
Say I have a 32-bit Computer, with virtual memory space of 2^32 bytes.
Memory paging is used, each page is 2^8 bytes.
So the memory address sizes are 24 bits. Since (2^32/2^8 = 2^24 bytes).
And the offset would be 8 bits? This I do not quite understand. Since I know that the total address is 32, and 24 is already taken by the pages, so the remainder is the offset of 8.
Lastly for the page size. If each physical memory address is stored in 32 bits (4 bytes), the table size would be 2^26 (2^24 * 2^2). Is this correct?
Page Table size = number of entries*size of entry
In your case, each page is 2^8 bytes, that is - you need 8 bits offset. You got that one right.
This leaves us with 24 bits for Page. 2^24 different pages.
Size of page-table for process X is: 2^24*Entry-Size. which is not provided by you here.
Lets assume it needs 32 bits per entry. Then, 2^24*32 = 2^24*2^5 = 2^29 bits.
Question is here:
Consider a logical-address space of 32 pages with page size 512 words,
mapped onto a physical memory of 128 frames.
I want to know if my attempting calculation below is correct:
so far I have come the:
**
32 pages = 2^5 bits
512 words = 2^9 bits
128 frames = 2^7 bits
**
How to calculate the logical address and physical address if i do not know the word size?
Word size depends on the computer architecture. Generally for a 32 bit CPU the word size is 32 bits(4 bytes) and for 64 bit CPU, it is 64 bits(8 bytes).
* Logical address will be generated by the CPU for a particular proceess, you don't need to calculate anything. As the CPU generates the logical address it will be mapped to physical address by Page Map Table or a fast Cache in Memory management unit(MMU).
* With respect to the details given above, your CPU generates the logical address of 14 bits, so it can address (2^14 words in memory). Assuming your processor is 32 bit, then it can access 2^16 bytes.
* Given the logical address of 14 bits, it looks in the page map table by using the first 9 bits for page. Then it finds the address where the page is actually located in the physical memory and it adds the offset to the physical address to find memory location in the Main memory.
I have a very simple (n00b) question.
A 20-bit external address bus gave a 1 MB physical address space (2^20
= 1,048,576).(Wikipedia)
Why 1 MByte?
2^20 = 1,048,576 bit = 1Mbit = 128KByte not 1MB
I misunderstood something.
When you have 20 bits you can address up to 2^20. This is your range, not the number of bits.
I.e. if you have 8 bits your range is up to 255 (unsigned) not 2^8 bits.
So with 20 bits you can address up to 2^20 bytes i.e. 1MB
I.e. with 20 bits you can represent addresses from 0 up to 2^20 = 1,048,576. I.e. you can reference up to 1MB of memory.
1 << 20 addresses, that is 1,048,576 bytes addressable. Hence, 1 MB physical address space.
Because the smallest addressable unit of memory (in general - some architectures have small bit-addressable pieces of memory) is the byte, not the bit. That is, each address refers to a byte, rather than to a bit.
Why, you ask? Direct access to individual bits is almost never needed - and if you need it, you can still load the surrounding byte and get the bit with bit masks and shifts. Increasing the bits per address allows you to address more memory with the same address range.
Note that a byte doesn't have to be 8 bit, strictly speaking, though it's ubiquitous by now. But regardless of the byte size, you're grouping bits together to be able to handle larger quantities of them.
I'm reading the "Modern Operating System" book. And I'm confused about the "Page Size".
In the book, the author says,
The incoming 16-bit virtual address is
split into a 4-bit page number and
12-bit offset. With 4 bits for the
page number, we can have 16 pages, and
with 12 bits for the offset, we can
address all 4096 bytes within a
page.
Why 4096 bytes? With 12 bits, we can address 4096 entries within a page, correct. But, one entry is an address (in this case, address size = 16 bits). So I think we can address 4096(entry) * 16(bit) = 4096(entry) * 2(byte) = 8KB, but why the book says that we can address 4096 (bytes) ?
Thanks in advance! :)
This is assuming byte-addressed memory (which almost every machine made in the past 30 years uses), so each address refers to a byte, not an entry or address or any other larger value. To hold a 16-bit value, you'll need two consecutive addresses (two bytes).
More than 30 years ago, there used to be machines which were word addressed, which worked like you surmise. But such machines had a tough time dealing with byte-oriented data (such as ASCII characters), and so have fallen out of favor. Nowadays, things like byte addressability, 8-bit bytes and twos-complement integers are pretty much just assumed.
The 12 bits are an offset within a page. The offset is in bytes, not addresses. 2^12 is 4096.
Because with 12 bit, we can address 2^12=4096 slots. Each slot represents an address which size is 1 byte in byte-addressable memory. Hence the total size is 4096*1=4096 bytes = 4KB.
What you are calculating is the page size, i.e. the size of a page in the page table in the memory. As we use 12 bits for the offset, each frame in the physical memory is 2^12=4096K. However, each page in the page table occupies 2^12 entries x 2 bytes = 8K in the memory.
okay so you have 16 bit virtual address let see what does it mean .It means you have 2**16 =65536 bytes.
4 bit page number that means there are 16 pages as 2^4=16
Now You Name The Pages As page1,page2...page16.
Now We are left with 12bits let us see how many address can 12 bits represent 2**12=4096 bytes
65536 bytes could also be achieved by dividing it into 16 pages containing 4096 bytes each as 4096*16=65536