Event viewer error
tomcat service stop timeout.
I use Tomcat 5.5, JDK1.8.20, the operating system is WinServer2012R2.
I tried to stop the Tomcat service in the window service, but it appeared in the timeout, event viewer error like picture.
Is it related to window update?
To skomisa, thank you for your help, I found the answer, and indeed it has a relationship with windows update, you can view this link.
https://www.bleepingcomputer.com/news/microsoft/microsoft-released-windows-7-and-81-cumulative-updates-kb4345459-and-kb4345424/
Related
What are the reason when a stopped windows service starts automatically?
I know only few which are
When service start-up mode is automatic and someone re-start the server then service will also get started.
When someone forcefully start the service manually.
Is there any other way when a stopped service can start?
Service triggers. This can be hardware device added, internet connection discovered, group policy change or any ETW event.
Have you checked there is a service Dependence? If another service depends on its function, it will automatically come up even though you stop the service.
Since it keeps restarting, it means you are not suppose to disable or stop the service.
Locate the ASP.NET State Service and check the Startup Type property and click the recovery tab for your service configuration and check if the options there could be restarting it.
You can also run a virus scan on your system to be sure your pc is safe.
I am trying to start my website in IIS, whenever I try to start my website I get the following error
Cannot start service w3svc on computer
I tried to start "World wide web publishing service", but I was unable to start it as it said:
Error 1068: The dependency service or group failed to start
Meanwhile when I checked my log I found this error,
The World Wide Web Publishing Service service depends on the HTTP service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
Please help me, I am badly caught with this error, I have spent a week researching this error but haven't found a solution yet.
Confirm that "Windows Management Instrumentation" is started and its start up type is set to automatic.
Also make sure the following dependency services are started for World Wide Web Publishing Service:
Windows Process Activation Service
Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper.
Open regedit, navigate to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HTTP]:
a) Double click on Start and change value data from 4(disabled) to 3(automatically).
b) Delete "NoRun" key if this key exists.
(warning: backup any IIS website configuration first). UN-install "Internet information Service" and "Windows process activation service(if it is already installed)" from "Turn windows feature on or off" and Restart your PC.
Type the below command in CMD and press enter:
net start http
Now it will notify you that service is already running.
Re-install Internet information Service from "Turn windows feature on or off".
Start IIS and my websites are started now, no more "w3svc service is not running error."
As for me - I just restarted the computer.
Make sure these 2 services running and their startup type is automatic.If they disabled and not running right click on them and go to properties and change from there.
Windows process activation service
Worldwide web publishing service.
Run cmd as administrator. Type iisreset. That's it.
Go to Task Manager --> Processes and manually stop the W3SVC process. After doing this the process should start normally when restarting IIS
In my case it was C:\Windows\System32\inetsrv\config\applicationHost.config which had an issue.
I had a "system.web" section in this file which was causing the problem. Removed the section and everything started working
I have got same issue on my server. Follow below steps -
Open command prompt (run as administrator)
type IISReset and enter.
It works and solved my problem.
I have had this problem after a windows update. Windows Process Activation Service is dependent service for W3SVC. First, make sure that Windows Process Activation Service is running. In my case, it was not running and when I tried to run it manually, I got below error.
Windows Process Activation Service Error 2: The system cannot find the file specified
The issue seems to be, that windows adds an incorrect parameter to the WAS service startup parameters. I fixed the issue using the following steps:
Start regedit (just type it into start) Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WAS\Parameters
Delete the NanoSetup variable. This variable is preventing WAS from starting
Start the WAS service using task manager
Now start the W3SVC service
You can now start your website in IIS again
I found above WPA service solution in this stack overflow thread.
In my case, IIS suddenly stopped working, and after that Windows process activation service was unable to restart.
The solution to fix this was:
Find WAS service in the services tab of windows task manager
In context menu choose Go to process
Kill process (its name will be svchost.exe)
Restart Windows process activation service
My Net.Tcp Port Sharing Service was disabled. I changed its startup to manual, started the service, and then IISRESET worked.
I also verified that the following dependent services were started in Services ([windows]+[r] services.msc):
World Wide Web Publishing Service
Windows Process Activation Service
Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Net.Msmq Listener Adapter
Net.Pipe Listener Adapter
Net.Tcp Listener Adapter
Net.Tcp Port Sharing Service
I found this solution by going through all dependencies and child dependencies of the World Wide Web Publishing Service and making sure that each service was enabled and started.
To verify all services for yourself, do the following:
Open up Services (just search for it from the start menu in Windows 10)
Find the World Wide Web Publishing Service
Right click on the service and then click "Properties"
Click on the Dependencies tab
Go through each system component in the two boxes and verify that each service is started (in Services).
Repeat steps 3-5 for each of the dependencies' dependencies until you run out of child dependencies
Service Properties - Dependencies Tab
This is probably a rarer case, but...
If you are using a custom AppPool Identity configuration be sure to check the AppPool is running. It may be turned off because credentials are invalid (usually due to an expired password). Update your credentials and start the AppPool.
I am able to resolve this by simply executing the below command in PowerShell to kill/stop service and restart the IIS server
taskkill /F /FI "SERVICES eq w3svc"
I managed to solve after:
Ctrl+Shift+Esc = To open Task Manager
In the "Processes" tab locate the "IIS Worker Process" and
finish it!
Run on cmd as an administrator. Type iisreset.
I was getting this error. It turns out World Wide Web Publishing Service was disabled.
Click Start, type Services in the Search box, and then click Services.
Scroll until you find the World Wide Web Publishing Service that is stopped or disabled.
right-click the service, and then click Properties.
Click the Startup type list, and then click Automatic.
Click Apply, and then click OK.
I started using XAMPP for Windows recently. Yesterday, it was working just fine, but not today. I had already disabled the use of port 80 and 4xx from Skype (after seeing lots of posts about that) and had even removed the software from startup. MYSQL and FileZilla start just fine with XAMPP, but I get this when I try to use Apache (which I can install it as a service):
Attempting to start Apache app...
Executing "f:\xampp\apache\bin\httpd.exe"
Return code: 0
Status change detected: running
Status change detected: stopped
Error: Apache shutdown unexpectedly.
This may be due to a blocked port, missing dependencies,
improper privileges, a crash, or a shutdown by another method.
Press the Logs button to view error logs and check
the Windows Event Viewer for more clues
If you need more help, copy and post this
entire log window on the forums
Now, I am also getting this on Event Viewer: "Event Log is unavailable. Verify that the service is running." When going to services and I try to initialize Apache2.4, it gives me a message and later disappears from the Service list.
I can start Apache when I install the serivce and then click on "Start," but then it gets stuck on "Attempting to start Apache service..." and nothing happens.
I also click on Apache's "Start" without installing the service, and that's when I get the long error above.
When I click on "Start" again, after the "Attempting to start Apache service..," I get "Status change detected: running" and then immediately "Status change detected: stopped" and then again
Error: Apache shutdown unexpectedly.
This may be due to a blocked port, missing dependencies,
improper privileges, a crash, or a shutdown by another method.
Press the Logs button to view error logs and check
the Windows Event Viewer for more clues
If you need more help, copy and post this
entire log window on the forums
Not sure what to do now. Please help.
I am having identical issues. XAMPP was also working yesterday and this morning has not been able to start. My error log does not display anything from today, but some logs from yesterday are present. I will let you know if I find the answer...
EDIT: I reinstalled XAMPP and everything seems to work fine now. Not an ideal answer I know...
Maybe u have opned skype at the same time because Apache's port its the same as the skype.So when a conflit exist Apache refuse to respond.
I have created a windows service with Automatic Start Type and install it in my system successfully but it does not start until i restart my system.
Details: yesterday i have create and install my service and then restart my windows so the service started successfully. but the problem occurred today when i boot my windows and opened the services list of windows from Control Panel\Administrative Tools\Services and selected my service i saw that it did not start automatically.
what is my mistake?
Assuming the service is set to 'Automatic' as the startup mode, and that it's state is not 'Started', then there will be at least one message about why the service did not start in the System Event Log.
Typical reasons are that the service didn't start quickly enough (Service Controller imposes a time limit on how quickly services must respond to the 'Start' message) or that the service depended on another service which wasn't yet available (check your service dependencies) or that your service simply failed due to a software error (e.g. some resource it needs could not be found).
Find the error in the event log, and you'll have a much better idea of why your service hasn't started.
As your service was running fine yesterday but not today. Checking all its dependencies would be my first suggestion.
In your Start-> Run, type services.msc . It's a shortcut to open the services console.
Then Right click on your service , if it is listed there, click on Properties on this popup menu.
Open the Dependency tab (4th tab) , check if your service depends on some other service and that dependency is running.
Regards,
bhupendra
Example:
SC.exe config "ServiceName" start= auto
What are the business reasons (advantages/disadvantages) of running a websphere 6.1 App server as a windows service? I mean what are the factors governing this decision?
The other thing I notice is that when I restart the service...and I click something on the admin console, it does n't give me the login page. What is happening here?
You should give this article a read:
http://www.ibm.com/developerworks/websphere/techjournal/1010_supauth/1010_supauth.html
Can you elaborate on the restarting the service and not receiving the login page issue. I am not sure i understand your query here.
What happens when you click on the console after restarting?
HTH
Manglu
To my knowledge - the main reason for choosing to run WebSphere as a Windows Service is that whenever the server goes down for whatever reason, and then is restarted, if not running WebSphere as a service you will need to actually log on to the server and manually start WebSphere. (startServer.bat, startManager.bat, startNode.bat etc).
So for any environment where uptime is an issue on the Windows platform, choose windows service. If you are just installing a development/test environment...not needed.