I have a table with a field of type TIME which is usually displayed HH:MM:SS, but I need to display it as HH:MM:SS.### where the ### are milliseconds. This is because it is recording processes and many processes happen in a single second, so when I display the order I need it precise. So my questions are: 1) is the TIME type the correct field type to be able to do this? And 2) if yes, then how would I display it?
Related
I am trying to create a measure which calculates the average daily revenue per customer, but only using days in a 6 months period prior to a specific date (where some type of conversion happens).
This specific date can be different for each customer.
The intention is to use the measure as a baseline for indexing daily average in the days/months/years after said conversion date.
If I put my current version of the measure in a card it works just fine (circled in green). But I will eventually have to visualize this over time as well. Thus I need the value to stay the same regardless of the row/date context in a table or timeline (circled in orange).
I suspect I need to use one of the ALL/ALLSELECTED/ALLEXCEPT filter modifiers but I can't really get anything to work.
The measure looks like this for now:
Average daily rev before conversion = CALCULATE (
AVERAGEX(
VALUES('Date'[Date]),
[HI & Acc Rev]
),
FILTER('poc vFact_SalesLine','poc vFact_SalesLine'[OrderDate_ID] IN DATESINPERIOD('Date'[Date],FIRSTNONBLANK('poc vDim_Customer'[DSE first conversion date],1),-6,MONTH)))
I've tried adding REMOVEFILTERS('Date'[Date]) just before the filtering of order dates, but that doesn't work. Gives me the exact same values as shown below.
All help is very welcome? Is my approach all wrong?
I was spending a whole day to find a way to keep the column filter searching regardless the number of characters being inputted. At the moment, i.e the date column stops filtering after the 12th character is entered as I have a custom search condition which requires a longer than a 12-character input.
The link below is what it looks like what I have implemented
https://datatables.net/examples/api/multi_filter.html
In my case, I try to get it work on the Start Date filter to allow date range filtering. For instance, when you search
ie. 2012/09/26
it returns one record and that is correct. Console log also
and when you search
ie. 2012/09/26 2012
it doesn't display any records nor trigger any keypress events (ie. $.fn.dataTable.ext.search.push()) which perform filtering after 2012/09/26 2 ie. 012.... The function is only triggered for the first 12 characters.
You can try it on jsfiddle.net/4udkchf8/3 which I've just created so that you can replicate the issue. When you enter upto to 2008/09/26 20, you see the value is logged to the console but any characters after than ie. '2008/09/26 201...`.
Can anyone shed light on how to achieve that?
Regards,
Trying to work on a system at work that will tell how many error codes were registered by a particular machine on the previous workday. This spreadsheet will need to be able to select only the errors generated on the previous date as this will become a rolling list of data generated across a wide time span. Currently working with the formula
=TODAY(),-1,B2:B17)
where the last array is some shutdown days I've put in to generate a global variable "Yesterday" and trying to use the formula
=COUNTIF(Table1[DateOnly],"="&Yesterday)
to gather the number of records that occurred yesterday.
Can anyone tell me where I'm going wrong?
Found that the issue was when I tried to convert the timestamp in mm/dd/yy hh:mm:ss format to mm/dd/yy and didn't realize that the other information was still hiding in there and confusing the formula. One of my coworkers recommended the use of a ROUNDDOWN function in the use of =ROUNDDOWN(argument,0) to get rid of the time information and just leave me with date.
I have a google sheet that gets filled via a google form.
Time stamps are created every time a bar code (work order number) is scanned.
The work order number is in the first column.
The 4 unique time stamp fields below are populated in the 2nd column from the google form.
Setup start
Setup finish
Production start
Production finish
The time stamp is created in the 3rd column.
I am trying to do conditional formatting
where the total setup time and production time are calculated but they are tied to their respective work order number.
time stamp functionality
The difficulty is that the timestamp values all fall into one vertical column.
I don't want a mix up of timestamp values with different work order numbers.
The work order numbers along with the 4 unique time stamp values may be input at various times so the formula can't be order specific.
Is there a way to do this? Thanks!
Below is an example link of the spreadsheet I have:
https://drive.google.com/open?id=1YA86jGq_jMsx-wKe19TnZZyf9F4aW6_kUIbrz8hkLJI
Make a pivot table of the data from the form, then use simple formulas adjacent to the new pivot to get the results you are trying to get. Example Image
I know there must be a simple answer to this, but I can't find it.
I have added a couple of textboxes to a Matrix in a BIDS/SSRS report. I've given these textboxes values such as:
=Fields!WEEK1USAGE.Value
It works (after a fashion); when I run the report (either on the Preview tab, or on the Report Server site) I see the first corresponding data value on the report - but only one.
I would think that once a value has been assigned via expressions such as "=Fields!WEEK1USAGE.Value", each value would display (rows would automatically be added).
There must be some property on the Matrix or the textbox that specified this, but I can't see what it might be.
Here is how my report looks (very minimalistic, so far) in the Layout pane:
...and after running, on the Preview tab:
Obviously, I want the report to display as many rows as necessary, not just one. The textboxes do have a "RepeatWith" property, but there description doesn't sound interesting/useful/promising.
I don't see any property on the Matrix control that looks right, either.
I thought maybe the designer was only showing one row of values, and ran the report on the server, too, but there also it just shows the two values.
So what do I need to do to get all the data for a provided field?
Matrices are for display of grouped data and summary information, usually in a horizontally expanding pivot table type of format. Is a matrix really what you are after? Looking at your expression you have =Fields!Week1Usage.Value but in a matrix what I expect to see would be at least =Sum(Fields!Week1Usage.Value) or even better just =Sum(Fields!Usage.Value). Then you would have ProactDescription as your row group and the week as your column group and it would all just work out everything for you, grouping and summing by Proact vertically and expanding the weeks out horizontally.
What seems to be happening is that you have no grouping on rows or columns and no aggregation so it is falling back to the default display which is effectively the First function - it displays the first row of data and as far as the matrix is concerned it has done its job because there is no grouping.
Without knowing your problem or data, I'll make up a scenario that might be what you are doing and discuss how the matrix does the heavy lifting to solve that problem. Let's say you have usage data for multiple Proacts. Each time one is used you record the usage amount and the date and time it is used. It could be used multiple times per day but certainly multiple times in a week. So you might be able to get the times each Proact is used from a table like so:
SELECT ProactDescription, TimeUsed, Usage
FROM ProactUsage
ORDER BY ProactDescription, TimeUsed
In your report you want to show the total weekly usage for each Proact over multiple weeks. Something like this:
Proact Week1 Week2 Week3 ...
Description Usage Usage Usage ...
--------------------------------------------
Anise, Fennel 1 CT 20.00 22.50 16.35 ...
St John's Wort 15.20 33.90 28.25 ...
...
and so on. Using a dataset based on the SQL above we create a matrix and in the row group properties we group on =Fields!ProactDescription.Value and in the column group properties we group on a week expression like =DateDiff(DateInterval.Week, Fields!TimeUsed.Value, Today) and then in the intersection of the row and column we put =Sum(Fields!Usage.Value). To display the header of the column nicely put an expression like
="Week " & DateDiff(DateInterval.Week, Fields!TimeUsed.Value, Today)
The matrix automatically does all the summing by week and product and expands the weeks horizontally for as many as you are reporting. For bonus points you can also put totaling at the end of the columns and the rows to show the total use of that Proact for the period (row total) and total use of all Proacts in that week (column total).